LG 47LD500 LC470WUH-SCR7 Service Manual ▷ View online
CONFIDENTIAL – DO NOT COPY
Page 7-10
File No. SG-0362
S/PDIF interface
1. One SPDIF input
2. One SPDIF out
2. One SPDIF out
Digital TV (ATSC/Open-Cable) Demodulator
1. Compliant with ATSC digital television standard
2. Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard
3. Accepts direct IF (44MHz or 43.75MHz) and low IF (5.38MHz)
4. NTSC interference rejection capability
5. Passes all Brazil fading channel ensembles
6. Meets all ATSC/A74 requirements
7. Excellent adjacent and co-channel rejection capability, only a single SAW is require
8. Dual digital AGC controls for IF and RF, respectively
9. Full-digital frequency offset recovery with wide acquisition range +/- 500KHz for ATSC and +/-250
KHz for CATV reception
10. EIA/CEA-909 antenna interface, both mode A and B are supported
2. Supports SCTE DVS-031 and ITU J.83 Annex B digital CATV standard
3. Accepts direct IF (44MHz or 43.75MHz) and low IF (5.38MHz)
4. NTSC interference rejection capability
5. Passes all Brazil fading channel ensembles
6. Meets all ATSC/A74 requirements
7. Excellent adjacent and co-channel rejection capability, only a single SAW is require
8. Dual digital AGC controls for IF and RF, respectively
9. Full-digital frequency offset recovery with wide acquisition range +/- 500KHz for ATSC and +/-250
KHz for CATV reception
10. EIA/CEA-909 antenna interface, both mode A and B are supported
Digital TV (DVB-T) Demodulator
1. Compliant with ETSI 300 744 DVB-T, Unified Nordig and DTG performance specifications
2. Suitable for single Frequency Network (SFN) operation
3. Support 2K, 8K modes
4. Support QPSK, 16, 64 QAM constellations
5. 1/4, 1/8, 1/16, 1/32 Guard interval
6. Support hierarchical & non-hierarchical modes
7. Accept 6, 7, 8 MHz channel bandwidth
8. Co-Channel interface (CCI) rejection capability
9. Adjacent Channel interface (ACI) rejection capability
10. Automatic mode detection
11. Excellent Doppler performance
12. Support code rate 1/2 ,2/3 ,3/4, 5/6, 7/8
13. Dual digital AGC control for IF and RF respectively
2. Suitable for single Frequency Network (SFN) operation
3. Support 2K, 8K modes
4. Support QPSK, 16, 64 QAM constellations
5. 1/4, 1/8, 1/16, 1/32 Guard interval
6. Support hierarchical & non-hierarchical modes
7. Accept 6, 7, 8 MHz channel bandwidth
8. Co-Channel interface (CCI) rejection capability
9. Adjacent Channel interface (ACI) rejection capability
10. Automatic mode detection
11. Excellent Doppler performance
12. Support code rate 1/2 ,2/3 ,3/4, 5/6, 7/8
13. Dual digital AGC control for IF and RF respectively
CONFIDENTIAL – DO NOT COPY
Page 7-11
File No. SG-0362
Peripherals
1. Built-in (T8032) in standby module
2. SDIO interface
3. Support MII/RGMII interface (built-in Ethemet MAC)
4. Three built-in UARTs with Tx and Rx FIFO, one of them has hardware flow control and high speed
2. SDIO interface
3. Support MII/RGMII interface (built-in Ethemet MAC)
4. Three built-in UARTs with Tx and Rx FIFO, one of them has hardware flow control and high speed
data transferring
5. Four basic serial interfaces ; one is for the tuner, two is the master for general purpose, the other
one extra slave serial interfaces for HDMI EDID data
6. Three PWMs
7. IR blaster and receiver
8. Real time clock and watchdog controller
9. 2-link USB2.0/1.1 (support external hub) for USB mass storage class devices
10. Support two serial flash or one serial and one NAND
11. Support seven-input low-speed servo ADC
12. Support boundary scan (JTAG)
7. IR blaster and receiver
8. Real time clock and watchdog controller
9. 2-link USB2.0/1.1 (support external hub) for USB mass storage class devices
10. Support two serial flash or one serial and one NAND
11. Support seven-input low-speed servo ADC
12. Support boundary scan (JTAG)
IC Outline
1. The MT5392 family is 638-pins BGA package
2. 3.3V/1.108V and 1.8V for DDR2 and DDR3
2. 3.3V/1.108V and 1.8V for DDR2 and DDR3
Ⅲ. Electrical Characteristics
1. Absolute Maximum Rating
CONFIDENTIAL – DO NOT COPY
Page 7-12
File No. SG-0362
2. DC Characteristics
3. Thermal Characteristics
4. DDR2 ELECTRICAL Characteristics and DC Operating Condition
CONFIDENTIAL – DO NOT COPY
Page 7-13
File No. SG-0362
5. DDR2 AC Operating Condiction
6. DDR3 ELECTRICAL Characteristics and DC Operating Condition
7. DDR3 AC Operating Condition
Click on the first or last page to see other 47LD500 LC470WUH-SCR7 service manuals if exist.