DOWNLOAD LG 47LB7DF (CHASSIS:LJ81A) Service Manual ↓ Size: 4.06 MB | Pages: 41 in PDF or view online for FREE

- 13 -

- 14 -

- 15 -

Adjust 3 items at 3. PCB assembly adjustments "4.1.3
sequence" one after the order

O Adjustment protocol

See ADC Adjustment RS232C Protocol_Ver1.0

O Necessary items before Adjustment items

- Pattern Generator : (MSPG-925FA)
- Adjust 480i Comp1 (MSPG-925FA : model :209 ,

pattern : 65)

- Adjust 1080p Comp1/RGB(MSPG-925FA:model : 225 ,

pattern : 65)

* If you want more information then see the below Adjustment
method (Factory Adjustment)

O Adjustment sequence

- ad 00 00 : Enter the ADC Adjustment mode.
- kb 00 04 : Change the mode to Component1 (No

actions)

- ad 00 10: Adjust 480i Comp1(Change the mode and

adjustment action)

- kb 00 06: Change to RGB-DTV mode(No action)
- ad 00 10: Adjust 1080p Comp1/RGB(Change the mode

and adjustment action)

- ad 00 90: End of the adjustment

O Summary : Adjustment component 480i/1080i and RGB

1080p is Gain and Black level setting at
Analog to Digital converter, and compensate
the RGB deviation

O Using instrument

- Adjustment remocon, 801GF(802B, 802F, 802R) or

MSPG925FA pattern generator

(It can output 480i/1080i horizontal 100% color bar
pattern signal, and its output level must setting
0.7V±0.1V p-p correctly)

<Pic.4 Adjustment pattern : 480i / 1080p 60Hz Pattern >

* You must make it sure its resolution and pattern cause every

instrument can have different setting

O Adjustment method 480i Comp1, Adjust 1080p Comp1/

RGB (Factory adjustment)

• ADC 480i Component1 adjustment
- Check connection of Component1 
- MSPG-925FA Ë Model: 209, Pattern 65
• Set Component 480i mode and 100% Horizontal Color

Bar Pattern(HozTV31Bar), then set TV set to
Component1 mode and its screen to "NORMAL" 

• After get the signal, wait more a second and enter the

"Ez-Adjust" with press ADJ key of Service remocon.
After then select "3.ADC 480i Comp1" with navigator
button and press "Enter". It is automatically adjustment

• You can see "ADC Component1 Success" message

after Adjustment success

• Error Messages: When its adjustment is not correct,

"ADC Component1 480i Fail" message displayed. If
component is not connection "Component1 Not
Connected", its format is not 480i then "Not Valid
Format", its signal don’t out then "Check Signal Status"
message displayed. These messages will be displayed
just a second.

- 16 -

Order

Command

Set response

1. Inter the 

ad 00 00

d 00 OK00x

Adjustment mode

2. Change the 

kb 00 04

b 00 OK04x (Adjust 480i Comp1 )

Source

kb 00 06  b 00 OK06x (Adjust 1080p Comp1/RGB)

3.Start Adjustment ad 00 10

4.Return the 

OKx ( Success condition )

Response

NGx ( Failed condition )

5.Read (main)

(main)

Adjustment data

ad 00 20

000000000000000000000000007c007b006dx

( sub )

(Sub)

ad 00 21

000000070000000000000000007c00830077x

6.Confirm 

ad 00 99

NG 03 00x (Failed condition)

Adjustment

NG 03 01x (Failed condition)

NG 03 02x (Failed condition)

OK 03 03x (Success condition)

7. End of Adjustment ad 00 90

d 00 OK90x