DOWNLOAD LG 42PQ3000-ZA (CHASSIS:PD92A) Service Manual ↓ Size: 24.33 MB | Pages: 55 in PDF or view online for FREE

Model
42PQ3000-ZA (CHASSIS:PD92A)
Pages
55
Size
24.33 MB
Type
PDF
Document
Service Manual
Brand
Device
TV / Plasma
File
42pq3000-za-chassis-pd92a.pdf
Date

LG 42PQ3000-ZA (CHASSIS:PD92A) Service Manual ▷ View online

PLASMA TV
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE CHASSIS,
READ THE SAFETY PRECAUTIONS IN THIS MANUAL.
CHASSIS : PD92A
MODEL : 42PQ3000
42PQ3000-ZA
- 2 -
CONTENTS
CONTENTS ............................................................................................................................... 2
SAFETY PRECAUTIONS ...........................................................................................................3
SPECIFICATION.........................................................................................................................4
ADJUSTMENT INSTRUCTION ..................................................................................................7
TROUBLESHOOTING GUIDE .................................................................................................12
BLOCK DIAGRAM ...................................................................................................................37
EXPLODED VIEW  ...................................................................................................................40
SVC. SHEET  ................................................................................................................................
PRINTED CIRCUIT DIAGRAM.....................................................................................................
- 3 -
SAFETY PRECAUTIONS
Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by      in the
Schematic Diagram and Exploded View. 
It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent
X-RADIATION, Shock, Fire, or other Hazards. 
Do not modify the original design without permission of manufacturer.
General Guidance
An  isolation Transformer should always be used during the
servicing of a receiver whose chassis is not isolated from the AC
power line. Use a transformer of adequate power rating as this
protects the technician from accidents resulting in personal injury
from electrical shocks.
It will also protect the receiver and it's components from being
damaged by accidental shorts of the circuitry that may be
inadvertently introduced during the service operation.
If any fuse (or Fusible Resistor) in this monitor is blown, replace it
with the specified.
When replacing a high wattage resistor (Oxide Metal Film Resistor,
over 1W), keep the resistor 10mm away from PCB.
Keep wires away from high voltage or high temperature parts.
Due to high vacuum and large surface area of picture tube,
extreme care should be used in handling the Picture Tube.
Do not lift the Picture tube by it's Neck.
Leakage Current Cold Check(Antenna Cold Check)
With the instrument AC plug removed from AC source, connect an
electrical jumper across the two AC plug prongs. Place the AC
switch in the on position, connect one lead of ohm-meter to the AC
plug prongs tied together and touch other ohm-meter lead in turn to
each exposed metallic parts such as antenna terminals, phone
jacks, etc. 
If the exposed metallic part has a return path to the chassis, the
measured resistance should be between 1M
and 5.2M
When the exposed metal has no return path to the chassis the
reading must be infinite.
An other abnormality exists that must be corrected before the
receiver is returned to the customer.
Leakage Current Hot Check 
(See below Figure) 
Plug the AC cord directly into the AC outlet.
Do not use a line Isolation Transformer during this check. 
Connect 1.5K/10watt resistor in parallel with a 0.15uF capacitor
between a known good earth ground (Water Pipe, Conduit, etc.)
and the exposed metallic parts.
Measure the AC voltage across the resistor using AC voltmeter
with 1000 ohms/volt or more sensitivity.
Reverse plug the AC cord into the AC outlet and repeat AC voltage
measurements for each exposed metallic part. Any voltage
measured must not exceed 0.75 volt RMS which is corresponds to
0.5mA.
In case any measurement is out of the limits specified, there is
possibility of shock hazard and the set must be checked and
repaired before it is returned to the customer.
Leakage Current Hot Check circuit
1.5 Kohm/10W
To Instrument's
exposed 
METALLIC PARTS
Good Earth Ground
such as WATER PIPE,
CONDUIT etc.
AC Volt-meter
IMPORTANT SAFETY NOTICE
0.15uF
- 4 -
SPECIFICATIONS
NOTE : Specifications and others are subject to change without notice for improvement.
V
Application Range
This spec is applied to the 42/50” 
PLASMA TV used PD92A Chassis.
Specification
Each part is tested as below without special appointment.
1) Temperature : 25±5°C (77±9°F), CST : 40±5
2) Relative Humidity: 65±10%
3) Power Voltage: Standard Input voltage (100-240V~, 50/60Hz)
* Standard Voltage of each product is marked by models.
4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with SBOM.
5) The receiver must be operated for about 20 minutes prior to the adjustment.
V
Test Method
1) Performance : LGE TV test method followed.
2) Demanded other specification 
Safety : CE, IEC specification
EMC
: CE, IEC
Chassis
PD92A
50PQ3000-ZA
42PQ3000-ZA
50PQ6000-ZA
42PQ6000-ZA
50PS3000-ZA
UK, German, Italy, Spain, Finland, Austria, Netherlands,
Switzerland, Luxembourg, Belgium, Czech, Greece,
Morocco, Turkey, Coratia, France, Norway, Denmark,
Sweden,  Slovenia, Poland, Ukraine, Hungary, Ireland,
Portugal, Russia, Serbia, Rumania,  Bulgaria, Slovakia,
Bosnia, Albania, Kazakstan 
LG
Model Name
Market
Brand
Remark
50PQ3000-ZA
42PQ3000-ZA
50PQ6000-ZA
42PQ6000-ZA
50PS3000-ZA
Safety : IEC/EN60065
EMI
: EN55013
EMS
: EN55020
UK, German, Italy, Spain, Finland, Austria, Netherlands,
Switzerland, Luxembourg, Belgium, Czech, Greece,
Morocco, Turkey, Coratia, France, Norway, Denmark,
Sweden,  Slovenia, Poland, Ukraine, Hungary, Ireland,
Portugal, Russia, Serbia, Rumania,  Bulgaria, Slovakia,
Bosnia, Albania, Kazakstan 
Model
Appliance
Market
TEST
Remark
Page of 55
Display

LG 42PQ3000-ZA (CHASSIS:PD92A) Service Manual ▷ Download

  • DOWNLOAD LG 42PQ3000-ZA (CHASSIS:PD92A) Service Manual ↓ Size: 24.33 MB | Pages: 55 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the LG 42PQ3000-ZA (CHASSIS:PD92A) in PDF for free, which will help you to disassemble, recover, fix and repair LG 42PQ3000-ZA (CHASSIS:PD92A) Plasma. Information contained in LG 42PQ3000-ZA (CHASSIS:PD92A) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.