DOWNLOAD LG 42LV3400-DG (CHASSIS:LT01M) Service Manual ↓ Size: 13.07 MB | Pages: 66 in PDF or view online for FREE

- 17 -

This specification sheet is applied to all of the LCD TV with
LT01M/P/R chassis.

1) The adjustment is according to the order which is

designated and which must be followed, according to the
plan which can be changed only on agreeing.

2) Power Adjustment: Free Voltage
3) Magnetic Field Condition: Nil.
4) Input signal Unit: Product Specification Standard
5) Reserve after operation: Above 5 Minutes (Heat Run)

Temperature : at 25±5ºC 
Relative humidity : 65±10%
Input voltage : 220V, 60Hz

Caution) When still image is displayed for a period of 20

minutes or longer, there can some  afterimage in
the black level area. 

6) Adjustment equipments : Color Analyzer (CA-210 or CA-

110), DDC Adjustment Jig equipment, SVC remote
controller. 

7) Push The “IN STOP KEY” - For memory initialization.

* APC - After Manual-Insert, executing APC

(1) Execute ISP program “Mstar ISP Utility” and then click

“Config” tab.

(2) Set as below, and then click “Auto Detect” and check “OK”

message.

If “Error” is displayed, Check connection between
computer, jig, and set..

(3) Click “Read” tab, and then load download file (XXXX.bin)

by clicking “Read”.

(4) Click “Connect” tab. If “Can’t” is displayed, check

connection between computer, jig, and set.

(5) Click “Auto” tab and set as below
(6) Click “Run”.
(7) After downloading, check “OK” message.

Case1 : Software version up

1. After downloading S/W by USB, TV set will reboot

automatically

2. Push “In-stop” key
3. Push “Power on” key
4. Function inspection
5. After function inspection, Push “I n-stop” key.

Case2 : Function check at the assembly line

1. When TV set is entering on the assembly line, Push

“In-stop” key at first.

2. Push “Power on” key for turning it on.

-> If you push “Power on” key, TV set will recover

channel information by itself.

3. After function inspection, Push “In-stop” key.

The receiver must be operated for about 5 minutes prior
to the adjustment when module  is in the circumstance of
over 15°C  
In case of keeping module is in the circumstance of 0°C,
it should be placed  in the circumstance of above 15°C
for 2 hours  
In case of keeping module is in the circumstance of
below -20°C, it should be placed in the circumstance of
above 15°C for 3 hours,.  

- 18 -

(1) Put the USB Stick to the USB socket.
(2) Automatically detecting update file in USB Stick.

- If your downloaded program version in USB Stick is Low,

it didn’t work. But your downloaded version is High, USB
data is automatically detecting

(3) Show the message “Copying files from memory”

(4) Updating is staring.

(5) After updating is complete, The TV will restart automatically.
(6) If  TV  turns on, check your updated version and Tool

option. (refer to the next page about tool option)

* If downloading version is higher than your TV have, TV

can lost all channel data. In this case, you have to
channel recover. If all channel data is cleared, you didn’t
have a DTV/ATV test on production line.

1. Push "IN-START" key in service remote controller.
2. Select "Tool Option 1" and Push “OK” button.
3. Punch in the number. (Each model has their number.)

4. Completed selecting Tool option.

G

” key at “6. ADC

Calibration”

* Caution: Using ‘power on’ button of the Adj. R/C, power on TV.

* ADC Calibration Protocol (RS232)

- Adjust Sequence

• aa 00 00

[Enter Adjust Mode]

• xb 00 40

[Component1 Input (480i)]

• ad 00 10

[Adjust 480i Comp1]

• xb 00 60 

[RGB Input (1024x768)]

• ad 00 10

[Adjust 1024x768 RGB]

• aa 00 90

[End Adjust Mode]

* Required equipment : Adjustment R/C

 

 

TV Software Upgrade

Upgrading...

Do not plug off!

63%

 

 

TV Software Upgrade

Upgrading COMPLETED

The TV will restart after    seconds.

100%

 

TV Software Upgrade

Copying files from memory

Do not remove the memory card from the pc

Do not plug off!

No.

Item

CMD1

CMD2

Data0

1 

Enter Adjust Mode 

A 

A 

0

0

2 ADC 

Adjust

A 

D 

0

0

Model 

Tool  

opt ion1 

Tool  

opt ion2 

Tool  

opt ion3 

Tool  

opt ion4 

Tool  

opt ion5 

47LV3500-DG_LGD 34656  19478  55337  26904 

256 

42LV3500-DG_CMI 26468  19478  55337  26904 

352 

42LV3500-DG_AUO 26472  19478  55337  26904 

352 

42LV3500-DG_LGD 26464  19478  55337  26904 

288 

37LV3500-DG_LGD 22368  19478  55337  26904 

288 

37LV3500-DG_AUO 22376  19478  55337  26904 

352 

32LV3500-DG_LGD 18272  19478  55337  26904 

288 

32LV3500-DG_AUO 18280  19478  55337  26904 

352 

42LV3400-DG_LGD 26592  9226  53289  26904 

288 

42LV3300-DG_AUO   9226 53289 

26904 288 

32LV3400-DG_LGD 18400  9226  53289  26904 

288 

32LV2500-DG_CMI 18212  19478  55337  26904 

352 

32LV2500-DG_LGD 18208  19478  55337  26904 

288 

32LV2500-DG_AUO 18216  19478  55337  26904 

352 

32LV2450-DG_AUO   19478 

55337 

26904 352 

26LV2500-DG_LGD 14112  8714  55337  26904 

288 

42LK450-DG_LGD 26240  18966  55305  26904  8450 

37LK450-DG_LGD 22144  18966  55305  26904  8450 

32LK450-DG_AUO 18056  18966  55305  26904 

290 

32LK450-DG_LGD 18048  18966  55305  26904  8482 

32LK330-DH_AUO 17992 18966  51209  26904  290 

32LK330-DH_LGD 17984  18966  51209  26904 

290 

26LK330-DH_AUO 13896  18966  51209  26904 

290 

22LK330-DH_CMI 9796  18966 51209  26904  256 

22LV2500-DG_AUO 10024  8714 

55337  26904 

288 

22LV2500-DG_CMI 10020  8714  55337  26904 

288 

19LV2500-DG_AUO 5928  8714  55337  26904 

288 

- 19 -

(1) Check display and sound

- Check Input and Signal items. (cf. work instructions)

1) TV
2) AV (CVBS)
3) COMPONENT (480i)
4) RGB (PC : 1024 x 768 @ 60hz)
5) HDMI 
6) PC Audio In 
* Display and sound check is executed by remote control.

* Caution :Not to push the INSTOP KEY after completion

if the function inspection. 

· W/B Equipment condition

CA210 : CH 9, Test signal : Inner pattern (85IRE)

· Above 5 minutes H/run in the inner pattern. (“power on” key

of adjust remote control)

4.1.1. Connecting picture of the measuring instrument

(On Automatic control)
Inside PATTERN is used when W/B is controlled. Connect to
auto controller or push Adjustment R/C POWER ON -> Enter
the mode of White-Balance, the pattern will come out

4.1.2. Auto-control interface and directions

1) Adjust in the place where the influx of light like floodlight

around is blocked. (illumination is less than 10ux).

2) Adhere closely the Color Analyzer (CA210) to the module

less than 10cm distance, keep it with the surface of the
Module and Color Analyzer’s Prove vertically.(80~100°).

3) Aging time

- After aging start, keep the power on (no suspension of

power supply) and heat-run over 15minutes.

- Using ‘no signal’ or ‘full white pattern’ or the others, check

the back light on.

4.1.3. Auto adjustment Map (RS-232C)

RS-232C COMMAND 
[ CMD    ID    DATA ]     

Wb     00       00       White Balance Start 
Wb     00       ff        White Balance End    

** Caution ** 

Color Temperature : COOL, Medium, Warm. 

One of R Gain/G Gain/ B Gain should be kept on 0xC0, and

adjust other two lower than C0.  (when R/G/B Gain are all C0, it
is the FULL Dynamic Range of  Module) 

*Manual W/B process using adjusts Remote control. 
•After enter Service Mode by pushing “ADJ” key, 
•Enter White Balance by pushing “

G

” key at “7. White Balance”. 

# After You finish all adjustments, Press “In-start” button and

compare Tool option and Area option value with its BOM, if
it is correctly same then unplug the AC cable. If it is not
same, then correct it same with BOM and unplug AC cable.
For correct it to the model’s module from factory JIG model. 

# Push  The  “IN STOP KEY” after completing the function

inspection. And Mechanical Power Switch  must be set
“ON”.  

Cool 13,000k

ºK

X=0.269(±0.002)

All

Y=0.273(±0.002)

<Test Signal>

Medium 9,300k

ºK

X=0.285(±0.002)

Inner pattern

Y=0.293(±0.002)

(216gray,85IRE)

Warm

6,500k

ºK

X=0.313(±0.002)

Y=0.329(±0.002)

Cool 9,300k

ºK

X=0.285(±0.002)

Only 22LD350

Y=0.293(±0.002)

<Test Signal>

Medium 8,000k

ºK

X=0.295(±0.002)

Inner pattern

Y=0.305(±0.002)

(216gray,85IRE)

Warm

6,500k

ºK

X=0.313(±0.002)

Y=0.329(±0.002)

 

Full White Pattern

COLOR
ANALYZER
TYPE: CA-210

RS-232C Communication

CA-210

RS-232C COMMAND MIN

CENTER

MAX

[CMD ID DATA]

(DEFAULT)

Cool

Mid

Warm

Cool

Mid

Warm

R Gain

jg 

Ja 

jd 

00

172 

192 

192

255

G Gain 

jh 

Jb

je 

00

172 

192 

192

255

B Gain 

ji 

Jc 

jf

00

192 

192 

172 

255

R Cut 

64 

64 

64 

128

G Cut 

64 

64 

64 

128

B Cut 

64 

64 

64 

128

- 20 -

· Connect D-sub Signal Cable to D-Sub Jack.
· Write EDID DATA to EEPROM (24C02) by using DDC2B

protocol.

· Check whether written EDID data is correct or not.
* For SVC main Ass’y, EDID have to be downloaded to Insert

Process in advance.

· Connect HDMI Signal Cable to HDMI Jack.
· Write EDID DATA to EEPROM(24C02) by using DDC2B

protocol.

· Check whether written EDID data is correct or not.
* For SVC main Ass’y, EDID have to be downloaded to Insert

Process in advance.

1) All Data : HEXA Value
2) Changeable Data :

*: Serial No : Controlled / Data:01
**: Month : Controlled / Data:00
***:Year : Controlled
****:Check sum

· After enter Service Mode by Pushing “ADJ” key
· Enter EDID D/L mode.
· Enter “START’ by pushing “OK” key.
HDMI number is dependent on model.

* Caution

1) Use the proper signal cable for EDID Download

- Analog EDID : Pin3 exists
- Digital EDID : Pin3 exists

2) Nerver connect HDMI & D-sub Cable at the same time.
3) Use the proper cables below for EDID Writing.
4) Download HDMI1, HDMI2 separately because each data is

different.

(1) FHD RGB EDID Data (CS : 1C)

(2) FHD HDMI 1 EDID Data (CS : E299)

D-sub to D-sub

DVI-D to HDMI or HDMI to HDMI

For HDMI EDID

For Analog EDID

Item

Manufacturer ID

Version

Revision

Condition

GSM

Digital : 1

Digital : 3

Data(Hex)

1E6D

01

03