DOWNLOAD LG 42LV3400-DA (CHASSIS:LT01U) Service Manual ↓ Size: 9.79 MB | Pages: 64 in PDF or view online for FREE

(1) Put the USB Stick to the USB socket.
(2) Automatically detecting update file in USB Stick.

- If your downloaded program version in USB Stick is Low,

it didn’t work. But your downloaded version is High, USB
data is automatically detecting

(3) Show the message “Copying files from memory”

(4) Updating is staring.

(5) After updating is complete, The TV will restart automatically.
(6) If  TV  turns on, check your updated version and Tool

option. (refer to the next page about tool option)

* If downloading version is higher than your TV have, TV

can lost all channel data. In this case, you have to
channel recover. If all channel data is cleared, you didn’t
have a DTV/ATV test on production line.

1. Push "IN-START" key in service remote controller.
2. Select "Tool Option 1" and Push “OK” button.
3. Punch in the number. (Each model has their number.)

4. Completed selecting Tool option.

G

” key at “6. ADC

Calibration”

* Caution: Using ‘power on’ button of the Adj. R/C, power on TV.

* ADC Calibration Protocol (RS232)

- Adjust Sequence

• aa 00 00

[Enter Adjust Mode]

• xb 00 40

[Component1 Input (480i)]

• ad 00 10

[Adjust 480i Comp1]

• xb 00 60 

[RGB Input (1024x768)]

• ad 00 10

[Adjust 1024x768 RGB]

• aa 00 90

[End Adjust Mode]

* Required equipment : Adjustment R/C

(1) Check display and sound

- Check Input and Signal items. (cf. work instructions)

1) TV
2) AV (CVBS)
3) COMPONENT (480i)
4) RGB (PC : 1024 x 768 @ 60hz)
5) HDMI 
6) PC Audio In 
* Display and sound check is executed by remote control.

- 17 -

Model 

Tool option1  Tool option2 Tool option3  Tool option4 Tool option5

42LV3500-DA_CMI

26468

19478

55332

26892

41

37LV3500-DA_AUO

22376

19478

55332

26892

41

32LV3500-DA_CMI

18276

19478

55332

26892

41

32LV2500-DA_CMI

18212

19478

55332

26892

41

26LV2500-DA_LGD

14112

8714

55332

26892

41

47LK550-DC_LGD

34529

19478

55300

26892

8224

42LK450-DA_LGD

26241

18966

55300

26892

8224

37LK450-DA_LGD

22145

18966

55300

26892

8224

32LK450-DA_AUO

18056

18966

55300

26892

33

 

 

TV Software Upgrade

Upgrading...

Do not plug off!

63%

 

 

TV Software Upgrade

Upgrading COMPLETED

The TV will restart after    seconds.

100%

 

TV Software Upgrade

Copying files from memory

Do not remove the memory card from the pc

Do not plug off!

No.

Item

CMD1

CMD2

Data0

1 

Enter Adjust Mode 

A 

A 

0

0

2 ADC 

Adjust

A 

D 

0

0

Model 

Tool option1  Tool option2 Tool option3  Tool option4 Tool option5

32LK330-DB_IPS

18000

18966

51204

26892

33

26LK330-DB_AUO

13896

18966

51204

26892

33

22LK330-DB_CMI

9796

18966

51204

26892

33

55LV3500-DA_LGD

46944

19478

55332

26892

8224

· W/B Equipment condition

CA210 : CH 9, Test signal : Inner pattern (85IRE)

· Above 5 minutes H/run in the inner pattern. (“power on” key

of adjust remote control)

4.1.1. Connecting picture of the measuring instrument

(On Automatic control)
Inside PATTERN is used when W/B is controlled. Connect to
auto controller or push Adjustment R/C POWER ON -> Enter
the mode of White-Balance, the pattern will come out

4.1.2. Auto-control interface and directions

1) Adjust in the place where the influx of light like floodlight

around is blocked. (illumination is less than 10ux).

2) Adhere closely the Color Analyzer (CA210) to the module

less than 10cm distance, keep it with the surface of the
Module and Color Analyzer’s Prove vertically.(80~100°).

3) Aging time

- After aging start, keep the power on (no suspension of

power supply) and heat-run over 15minutes.

- Using ‘no signal’ or ‘full white pattern’ or the others, check

the back light on.

4.1.3. Auto adjustment Map (RS-232C)

**Caution **

Color Temperature : COOL, Medium, Warm.
One of R Gain/G Gain/ B Gain should be kept on 0xC0, and
adjust other two lower than C0.
(when R/G/B Gain are all C0, it is the FULL Dynamic Range of
Module)

• After enter Service Mode by pushing “ADJ” key,
• Enter White Balance by pushing “

G

”key at “7.White Balance”

* After done all adjustments, Press “In-start” button and compare

Tool option and Area option

value with its BOM, if it is correctly same then unplug the AC
cable.
If it is not same, then correct it same with BOM and unplug AC
cable.
For correct it to the model’s module from factory JIG model.

* Push  The  “IN STOP KEY” after completing the function

inspection.

- 18 -

Cool 13,000k

ºK

X=0.269(±0.002)

All

Y=0.273(±0.002)

<Test Signal>

Medium 9,300k

ºK

X=0.285(±0.002)

Inner pattern

Y=0.293(±0.002)

(216gray,85IRE)

Warm

6,500k

ºK

X=0.313(±0.002)

Y=0.329(±0.002)

Cool 9,300k

ºK

X=0.285(±0.002)

Only 22LD350

Y=0.293(±0.002)

<Test Signal>

Medium 8,000k

ºK

X=0.295(±0.002)

Inner pattern

Y=0.305(±0.002)

(216gray,85IRE)

Warm

6,500k

ºK

X=0.313(±0.002)

Y=0.329(±0.002)

 

Full White Pattern

COLOR
ANALYZER
TYPE: CA-210

RS-232C Communication

CA-210

RS-232C COMMAND MIN

CENTER

MAX

[CMD ID DATA]

(DEFAULT)

Cool

Mid

Warm

Cool

Mid

Warm

R Gain

jg 

Ja 

jd 

00

172 

192 

192

255

G Gain 

jh 

Jb

je 

00

172 

192 

192

255

B Gain 

ji 

Jc 

jf

00

192 

192 

172 

255

R Cut 

64 

64 

64 

128

G Cut 

64 

64 

64 

128

B Cut 

64 

64 

64 

128

(3) FHD HDMI 2 EDID Data (CS : E289)

(4) FHD HDMI 3 EDID Data (CS : E279)

(5) HD RGB EDID Data (CS : CD)

(6) HD HDMI 1 EDID Data (CS : B465)

(7) HD HDMI 2 EDID Data (CS : B455)

(8) HD HDMI 3 EDID Data (CS : B445)

(9) ASCII Code

- When pressing IN-STOP key by SVC remocon, Red LED

are blinked alternatively. And then Automatically turn off.

(Must not AC power OFF during blinking)

Confirm whether is normal or not when between power
board’s ac block and GND is impacted on 1.5 kV(dc) or 2.2
kV(dc) for one second.

- 19 -