DOWNLOAD LG 42LB1DRA (CHASSIS:LA61A) Service Manual ↓ Size: 11.23 MB | Pages: 56 in PDF or view online for FREE

- Check the connection Component1, RGB to the Test

Equipment 

1) Select Component1, RGB as the input with  100%

Horizontal Color Bar Pattern(HozTV31Bar) in 1080i
Mode and select ‘Normal’ in screen.

2) After receiving signal for at least 1 second, press the

ADJ Key on the Service R/C to enter the ‘Ez - Adjust’
and select the ‘5. ADC 480p Comp1/RGB’.
Pressing the Enter key to adjust with automatic
movement.

3) When the adjustment is over, 'ADC Component1

Success’ is displayed. If the adjustment has errors,
'ADC Configuration Error’ is displayed.

4) After the Component1 adjustment is over, convert the

RGB-DTV Mode and display Pattern. When the
adjustment is over, 'ADC RGB_DTV Success’ is
displayed. 

5) Readjust after confirming the case Pattern or adjustment

condition where the adjustment errors. 
Error massage is ‘Component Not Connection’ or
‘Change Format to 480i’ or ‘Check Pattern of device’.

6) After adjustment is complete, exit the adjustment mode

by  pressing the ADJ KEY.

(1) Color Analyzer : CA-210 or same product
(2) Computer to adjust (needed for the automatic adjustment,

possible to communicate with the RS-232C)

(3) Pattern Generator(MSPG-925FA)

- “wb 00 00” : Start Auto-adjustment of white balance.
- “wb 00 10” : Start Gain Adjustment (Inner pattern) 
- “jb 00 c0” : 
- …
- “wb 00 1f” : End of Adjustment

* If it needs, offset adjustment(wb 00 20-start, wb 00 2f-end)

- ”wb 00 ff” : End of white balance adjustment (inner pattern

disappear)

Caution) When you adjust automatically, RS-232C Command

is used.

(1) Automatic adjustment of White Balance adjustment

- Execute Power Only key of the adjustment R/C to

execute automatic adjustment. Set the Baud Rate to
115200.

- Always start adjustment with “wb 00 00” and end

adjustment with “wb 00 ff”

- Adjust the offset if necessary.

(2) Manual adjustment of White Balance

O

Operate the Zero-calibration of the CA-210, then attach
sensor to LCD module surface when you adjust.

O

Manual adjustment is also possible by the following
sequence.

1) HEAT RUN at least 30 minutes by pressing the Power

only  Key on the Service Remote Control and adjust.

2) After attaching sensor to center of screen, select ‘White-

Balance’ of ‘Ez-Adjust’ by pressing the ADJ key on the
Service R/C. Then enter adjustment mode by pressing
the Right KEY (G). This time white pattern is displayed.

RS-232C COMMAND

Meaning

[CMD    ID      DATA]

wb

00

00

White Balance adjustment start.

wb

00

10

Start of adjust gain (Inner white pattern)

wb

00

1f

End of gain adjust

wb

00

20

Start of offset adjust(Inner white pattern)

wb

00

2f

End of offset adjust

wb

00

ff

End of White Balance adjust(Inner pattern disappeared)

- 13 -

Full White Pattern

Digital RGB

PDP MONITOR

COLOR

ANALYZER

TYPE; CA-100

MSPG-925FA

<Fig. 4> Connection Diagram of Automatic Adjustment

R Gain

G Gain

B Gain

R Cut

G Cut

B Cut

Jg

Jh

Ji

Cool

Ja

Jb

Jc

Mid

RS-232C COMMAND

[CMD ID DATA]

CENTER

(DEFAULT)

Jd

Je

Jf

00

00

00

255

255

255

127

127

127

Warm

Min

Max

184

187

192

64

64

64

Cool

161

183

192

64

64

64

Mid

192

159

95

64

64

64

Warm

3) In case that White balance is COOL.

- Fix B Gain(192)/ R-Cut(64)/ G-Cut(64)/ B-Cut(64) and

adjust the High Light by R Gain / G Gain.

In case that White balance is Medium.
- Fix R Gain(192)/ R-Cut(64)/ G-Cut(64)/ B-Cut(64)  and

adjust the High Light by G Gain / B Gain.

In case  that White balance is Warm
- Fix R Gain(192)/ R-Cut(64)/ G-Cut(64)/ B-Cut(64)  and

adjust the High Light by G Gain / B Gain.

4) Adjust using Volume +/- key.
5) After adjustment is complete, exit the adjustment mode

by pressing the ADJ key.

* Color coordinate and temperature of White Balance

- Brightness : High Level : 216 gray

1) Cool : 12000 ºK, ∆uv=0.000, luminance Min : 300 cd
2) Medium : 9300 ºK, ∆uv=0.000, luminance Min : 300 cd
3) Warm : 6500 ºK, ∆uv=0.000, luminance Min : 250 cd

Adjustment for reduce color difference Main/Sub screen of RF
or Video signal.

(1) Connection the Video Signal Generator(Master) to the TV

AV Input terminal.
After input pattern(Model: 201(NTSC-M), Pattern: 33(100%
color Bar), pressing the ‘Rev’ button and appear as below
figure.

(2) After receive signal, confirm the signal receiving.

And Enter the ‘EZ-ADJUST’ by pressing the ADJ Key on
the Service R/C.
Select ‘5. Video(UPD)-Set’ and enter the adjustment mode
by pressing the right key (G).

(3) When enter the adjustment mode, displayed the TV 2CH

SPLIT Screen automatic at picture and appear as below
figure.

(4) When the automatic adjustment is over, 'RF Configuration

Success’ is displayed. If the adjustment has errors, 'Video
Configuration Error’ is displayed.

(5) After the RF signal automatic adjustment is over, convert

the Video Mode as below figure and adjust with automatic
movement the Video Mode. 
When the automatic adjustment is over, 'Video
Configuration Success’ is displayed. If the adjustment has
errors, 'Video Configuration Error’ is displayed.

- 14 -

Color temperature

Test Equipment

Color Coordination

x

y

COOL

CA-210

0.272±0.002

0.276±0.002

CS-1000

0.272±0.002

0.278±0.002

MEDIUM

CA-210

0.285±0.002

0.290±0.002

CS-1000

0.285±0.002

0.293±0.002

WARM

CA-210

0.312±0.002

0.319±0.002

CS-1000

0.314±0.002

0.324±0.002

- 15 -

 

 

 

 

 

 

• 

- 16 -

•