DOWNLOAD LG 32LX5DCS-UA (CHASSIS:LA64A) Service Manual ↓ Size: 10.53 MB | Pages: 55 in PDF or view online for FREE

- 17 -

CURRENT PROBE : P6022A or same product

4.6 k‰ / 500 W

SC100

P203

P202

P401

400PF
3.15KV

400PF
3.15KV

P402

INPUT CONTROL SIGNAL

BURST DIMMING SIGNAL

INVERTER + POWER BOARD

VOLTAGE PROBE P6015A
or same product

VOLTAGE PROBE P6015A
or same product

INVERTER
CONNECTION
WIRE

INVERTER
TRANSFORMER

ON/OFF : 5V

SELECT
180Hz : 5V
150Hz : 0V

SYNC
180Hz, 3.3V, 50% Duty
150Hz, 3.3V, 50% Duty

INV_CTRL :5V

3.4V_ON : 5V

BURST_DIM
0-3.3V
A_DIM
0-1.65V

P201

AC INPUT

4.6 k‰ / 500 W

- 18 -

1) Does not  minute discharge at module. 
2) Non does not come into the front LED. 

Is the power cord plugged in?

Plug in the power cord.

Yes

No

Is the Line Filter and Power

Board Cable connected?

Connect the Cable.

Yes

No

Is the Fuse(F100) on

Power Board normal?

Replace the Fuse.

Yes

No

Is the Power Board and 13P cable

of Main Board Cable connected?

Connect the Cable.

Yes

No

After removing the cables, connect them to the Power Board(except the
SC100 connection cable), and change the AC voltage marking to manual.
When ST-BY 5V does not operate, replace the Power Board.

- 19 -

Does minute discharge

At Module?

Is the LVDC cable

normal?

Is the IC1111

output normal?

Check the LCD Module.

Yes

No

YES

Yes

Reconnect the LVDS

cable in P600.

No

Is the IC506(FLI8662)

Output normal?

Replace the main

board.

No

Yes

Is the LED change when

Push remote contol?

Replace the IR board.

No

NO

Replace the Power

board.

Is output the normality

Low/High voltage except

Stand-by 5V?

NO

1) No OSD and image occur at screen.
2) It maintains the condition where the front LED is green.

The screen does not become the display from specific input mode.

(RF, AV, Component, RGB, DVI).

- Check the all input mode should become normality display.
- Check the Video(Main)/Data(Sub), Video(Main)/Video(Sub) should become normality display from the PIP mode or DW mode.

(Re-Check it Swap) 

Is the Tuner normal?

Is the FIL8662

normal?

Check the tuner cable.
- Isn’t cable has broken?
- Is the cable connected wellfrom

MPI card to tuner?

Cable inserts well.

Yes

No

No

Replace the Tuner

No

Is the Input voltage, IIC Communication
and CVBS output normal?

Yes

Is the Input voltage, IIC Communication
and HV sync normal?

No

Replace the IC or Main Board.

No

- 20 -

Is Video input of the AV

Jack(J501) normal?

Yes

Is the FIL8662

normal?

Check the input source.
- Is the source format suportable?
- Is the source device operate well?
- Is the cable connected well?

No

Is the Input voltage, IIC Communication
and HV sync normal?

No

Replace Main board.

No

Is R, G, B input and H, V

Sync of the J500 normal?

Yes

Is the FIL8662

normal?

Check the input source.
- Is the source format suportable?
- Is the source device operate well?
- Is the cable connected well?

No

Is the Input voltage, IIC Communication
and HV sync normal?

No

Replace Main board.

No

Is ouput of the HDMI Jack

(J300 or J301) normal?

Yes

Is the SIL9023

(IC302) normal?

Check the input source.
- Is the source format suportable?
- Is the source device operate well?
- Is the cable connected well?

No

Is the Input voltage, IIC Communication
and HV sync normal?

No

Replace the IC.

No

Yes

Is the FIL8662

normal?

Is the Input voltage, IIC Communication
and HV sync normal?

No

Replace Main board.

No