LG 32LN5700 (CHASSIS:LA33B) Service Manual ▷ View online
LGE TV Division LG()
Establish : 12.7.6. 37
Reform : 12.10.15 114
Reform : 12.10.15 114
LG 전자
LC33B Product Specification
3) Pattern Generator : VG-828 or a sort of digital pattern generator (204 Gray)
4) Test pattern : 80IRE(204Level) pattern of Full window
5) Video menu option condition (same all input as below)
- for measuring Medium / Cool
Picture
Mode
Picture
Mode
Back
light
light
Color Temp.
Dynamic
Contrast
Contrast
Dynamic
Color
Color
Motion
EyeCare
EyeCare
Cool
Medium
Standard
100
C50
0
Off
Off
Off
- for Measuring Warm : Picture mode Expert 2 Default.
Picture
Mode
Mode
Back
light
light
Color Temp.
Dynamic
Contrast
Contrast
Dynamic
Color
Color
Motion
EyeCare
EyeCare
Expert 2
50
Warm 2
Off
Off
Off
6) Measurement
● Do heat-run LCD module at 60 minutes and over in normal temperature(25℃) by using full white pattern.
● For Measuring Cool and Medium, set the video condition and white balance to C0,
Impress test pattern signal, and measure 3 times color coordinates of central of screen.
● Measure the Medium as same condition in video signal /RGB signal.
● For Measuring Warm, set the picture mode to Expert2/Cinema2(for Japan).
● Do heat-run LCD module at 60 minutes and over again.
Impress test pattern signal, and measure 3 times color coordinates of central of screen.
LGE TV Division LG()
Establish : 12.7.6. 38
Reform : 12.10.15 114
Reform : 12.10.15 114
LG 전자
LC33B Product Specification
▣
Max Luminance measure specification
1) In non-impressed condition, measure peak brightness displayable as much as possible LCD module.
2) Measuring instrument: CA-210 or a sort of Color Analyzer.
3) Pattern Generator : VG-828 or a sort of digital pattern generator (displayable Full White & 1/25 White Window pattern)
4) Measure condition
4) Measure condition
● Test pattern: 100IRE(255Level) pattern of Full window
● SET condition : Contrast & Brightness Level 100%
● Environment condition : Dark room in the non outside light
● Video menu option condition
Picture
Mode
Back
light
Color
Temp.
Dynamic
Contrast
Dynamic
Colour
Motion
EyeCare
LED Local
Dimming
Standard
100
C50
Off
Off
Off
Off
▣
DCR (Dynamic Contrast Ratio) measure specification
1) Measure condition
● Test pattern : 100IRE(255Level) and 0IRE (0Level) pattern of Full window
● Test pattern : 100IRE(255Level) and 0IRE (0Level) pattern of Full window
● Video menu option condition (same all input)
: Picture mode Vivid Default
2) Measurement
● Impress 100IRE(255Level) of Full window pattern signal, and measure center brightness degree Lw of white.
● Impress 100IRE(255Level) of Full window pattern signal, and measure center brightness degree Lw of white.
● Impress 0IRE(0Level) of Full window pattern, and measure center brightness degree Lb of black.
● Calculate the following numerical formula.
- Dynamic Contrast Ratio = Lw / Lb
▣
Contrast / Brightness Tracking measure specification
LGE TV Division LG()
Establish : 12.7.6. 39
Reform : 12.10.15 114
Reform : 12.10.15 114
LG 전자
LC33B Product Specification
1) Measure condition
● Test pattern : 100IRE(255Level) pattern of Full window
● Test pattern : 100IRE(255Level) pattern of Full window
● Video menu option condition : Shipment MODE. (In-Stop)
2) Measurement
● Brightness tracking : Change brightness value in video menu.
● Brightness tracking : Change brightness value in video menu.
Check the luminance every 10 point while decrease brightness value 100 to 0.
● Contrast tracking : Change contrast value in video menu.
● Contrast tracking : Change contrast value in video menu.
Check the luminance every 10 point while decrease contrast value 100 to 0.
▣
Static Contrast Ratio for Local Dimming
1) Measure condition
● Test pattern : 50 APL Window Pattern [Left – 100IRE (255Level) of 50% window / Right – 0IRE(0Level) of 50% window]
● Test pattern : 50 APL Window Pattern [Left – 100IRE (255Level) of 50% window / Right – 0IRE(0Level) of 50% window]
● Video menu option condition
- Picture mode Vivid Default , HDMI
Measure Point
LGE TV Division LG()
Establish : 12.7.6. 40
Reform : 12.10.15 114
Reform : 12.10.15 114
LG 전자
LC33B Product Specification
2) Measurement
● Impress specific pattern signal,
● Impress specific pattern signal,
● Measure center brightness degree Lw of left white window, and measure center brightness degree Lb of right black.
● Calculate the following numerical formula.
- Static Contrast Ratio = Lw / Lb
▣
Contrast ratio measure specification
1) Test display signal : 100%(255Gray)Full White Window signal & all Black Raster signal(0Gray)
2) Dark room measure condition : : Using touch type Color analyzer CA-210 Dark room in the non outside light
3) Bright room measure condition : In bright room of 150Lx illumination in the panel surface, locate a source of light on the above 45˚of the panel surface.
4) Measure method
● In standard test condition, impress 100%(255Gray)Full White Window Pattern signal .
measure center peak brightness degree LV of white window
● Impress black Raster signal as contrast ratio measurement signal.
Measure black brightness degree Lb of central
Calculate the following numerical formula
Contrast ratio = LV / Lb
If it does not use Prior measurement, use generally simple test measurement.
Signal
Picture Mode Dynamic Contrast Dynamic Color
Clear White
Black Level
RF
NTSC-M
Vivid
High
High
High
Low
PAL
Vivid
High
High
High
Auto
AV
NTSC-J
Vivid
High
High
High
High
PAL
Vivid
High
High
High
Auto
Component
1080p
Vivid
High
High
High
High
RGB
1024x768
Vivid
Off deactivated
NA
Click on the first or last page to see other 32LN5700 (CHASSIS:LA33B) service manuals if exist.