LG 32LN560B / 32LN560Y (CHASSIS:LB33B) Service Manual ▷ View online
3 / 88
EPI Interface (mini-LVDS vs. EPI)
Comparison
HF mini-LVDS
What to change
EPI (Embedded clock P-to-P Interface)
-Difficult to upgrade bandwidth limit
-Multiple number of wires needed for higher bandwidth
HF mini-
LVDS
FHD (10bit)
60Hz
120Hz
240Hz
No. of Signal
36
36
72
Connector
60pin
(2ea)
60pin
(2ea)
80pin
(2ea)
-Better reliability on common noise
-No data skew. Better EMI margin
-Lower cost ( Cable, Connector )
-Slim S-PCB design (14mm 10mm) helps slimmer TV
EPI
FHD (10bit)
60Hz
120Hz
240Hz
960ch
960ch
720ch
No. of Signal
12
12
32
Connector
-
50 pin
(2ea)
70pin
(2ea)
LCM (T-con to S-Driver IC)
TCON
2
LOCK
VCC
1
TCON
18
VCC
1
18
HF mini-LVDS
EPI
* Bandwidth Capability
- FHD 120Hz 10Bit : 594Mbps@36Lines → 1.65Gbps@12Lines
- FHD 240Hz 10Bit : 594Mbps@72Lines → 1.25Gbps@32Lines
(FHD 120Hz)
(FHD 120Hz)
4 / 88
HF mini-LVDS
EPI
Topology
Protocol
Features
@10bit, FHD120
• Multi Drop
• Data rate: 660Mbps
• External clock
• Data rate: 660Mbps
• External clock
• Point to Point
• Data rate : 1.8Gbps
• Embedded clock, Control
• Data rate : 1.8Gbps
• Embedded clock, Control
Merit
• Simple structure
• Standardization
• Standardization
• Fewer Lines : 12
• Embedded clock
: low EMI, Clock skew free
• Easy to PCB design
• Embedded clock
: low EMI, Clock skew free
• Easy to PCB design
Demerit
• Too many lines : 36
• Clock skew
• EMI due to clock lines
• Bandwidth limit
• Clock skew
• EMI due to clock lines
• Bandwidth limit
• Transmission Overhead
: 4bit delimiter
: 4bit delimiter
TCON
Lock
2
1
TCON
EPI Interface (mini-LVDS vs. EPI)
5 / 88
NFC (Near field communication)
Near field communication (NFC) is a set of standards for smartphones and similar devices to establish radio communication
with each other by touching them together or bringing them into close proximity, usually no more than a few centimetres.
Present and anticipated applications include contactless transactions, data exchange, and simplified setup of more complex
communications such as Wi-Fi. Communication is also possible between an NFC device and an unpowered NFC chip, called
a "tag".
with each other by touching them together or bringing them into close proximity, usually no more than a few centimetres.
Present and anticipated applications include contactless transactions, data exchange, and simplified setup of more complex
communications such as Wi-Fi. Communication is also possible between an NFC device and an unpowered NFC chip, called
a "tag".
Us
e
r
A
c
ti
on
A
re
a
Samrt phone close to
NFC Tag
Player choose
From Smart phone
to TV
From TV
to Smart phone
6 / 88
Main PCB for Broadband
Main + TCON all in one
1
Main processor, DDR Memory
eMMC Memory
eMMC Memory
2
3
4
Micom for Key/IR sensing
PMIC
Audio AMP
**LA74/69/66**-T*
5
EPI Wafer
1
Chassis : LB33B
PCB P/No :
PCB P/No :
EAX6487210*
6
Level shifter
1
5
3
To module
6
Key+IR
Front Spk
WIFI/BT
1
2
4
To PSU
Without Isolator
Tuner
Click on the first or last page to see other 32LN560B / 32LN560Y (CHASSIS:LB33B) service manuals if exist.