LG 32LF5700 Service Manual ▷ View online
- 13 -
ADJUSTMENT INSTRUCTION
1. USB DOWNLOAD
To update the system software, use only the “USB IN ” jack on the SIDE of the TV.
(The USB IN jack on the side of the TV works for the music or photo service.)
1-1) sub Micom & TV Software Download
a) Put
the
“hmx_lf5700.hdf”
in the USB.
b) Connect the USB device to the
“USB IN”
jack on the side of the TV.
c) Power Off and Power On.
d) Waiting until the new software upgrade is finished.
d) Waiting until the new software upgrade is finished.
e) Fishing the version uploading, you have to put USB stick and
“AC Power”
off.
f) After
putting
“AC Power”
on and check updated version on your TV.
z
If downloading version is more high than your TV have, TV can lost all channel data.
In this case, you have to channel recover.
if all channel data is cleared, you didn’t have a DTV/ATV test on production line.
if all channel data is cleared, you didn’t have a DTV/ATV test on production line.
- 14 -
2. OTA DOWNLOAD
Auto update case.
a) Click the Software Update.
b) Click the Auto Update.
b) Click the Auto Update.
c) If found, the OTA detection message is shown.
c-1) Select “Yes”.
c-2) The TV is reboot and OTA process starts.
c-3) Select “No”
c-4) OTA process does not start.
c-2) The TV is reboot and OTA process starts.
c-3) Select “No”
c-4) OTA process does not start.
d) The TV is reboot and OTA process starts.
e) If not, the OTA not detection message is shown.
e) If not, the OTA not detection message is shown.
Manual Update Case.
1. DVB-T
a)
Click the Software Update.
b)
Click the Manual Update.
c) If found, the OTA detection message is shown.
c-1) Select “Yes”.
c-2) The tv is reboot and OTA process starts.
c-3) Select “No”
c-4) OTA process does not start.
c-2) The tv is reboot and OTA process starts.
c-3) Select “No”
c-4) OTA process does not start.
d) The TV is reboot and OTA process shows.
e) If not , the OTA not detection message is shown.
e) If not , the OTA not detection message is shown.
- 15 -
2. DVB-S/S2
a)
Click the Software Update.
b) Click the Manual Update.
c)
Change Frequency, Polarization, Symbol Rate, FEC
for OTA TP.
d)
Click “Search” button
e)
If found, the OTA detection message is shown.
e-1) Select “Yes”.
e-2) The tv is reboot and OTA process starts.
e-3) Select “No”
e-4) OTA process does not start.
e-2) The tv is reboot and OTA process starts.
e-3) Select “No”
e-4) OTA process does not start.
f)
The TV is reboot and OTA process shows.
g)
If not , the OTA not detection message is shown.
- 16 -
3. EDID DOWNLOAD
3-1. Panel Setting
a)
You should change the panel size by going to the Factory Mode, press “Menu”, “1”, “2”, “4”, 7” and “5” keys on a
remote.
remote.
b)
You have to select 32”, 42” panel in Factory mode.
32LF5700 : Panel Select Æ “LG_1080P_LC320WUN_50”
32LH5700 : Panel Select Æ “LG_1080P_LC320WUD_100”
42LF5700 : Panel Select Æ “LG_1080P_LC420WUF_100”
42LH5700 : Panel Select Æ “LG_1080P_LC420WUF_100”
Click on the first or last page to see other 32LF5700 service manuals if exist.