LG GA-449 Service Manual ▷ View online
- 6 -
NOTE : This is a basic model. The shape of refrigerator is subject to change.
PARTS IDENTIFICATION
Dairy Corner
(Optional)
(Optional)
Egg Tray
Door Basket
Door Basket
Guide Bottle
Guide Bottle
Freezer Door
Basket
Basket
Pizza Nok
Lamp
Glass Shelf
Jet-Cooling
(Optional)
Wine Rack
(Optional)
Vegetable Drawer
Vitamin kit
(Optional)
OPTI Zone
(Optional)
Deodorizer
(Optional)
Dairy Corner
(Optional)
Ice Tray
(Optional)
Ice Box
(Optional)
Room Plus
(Optional)
Vodka Rack
(Optional)
Freezer Drawer
Removable
Plinth
Leveling Screw
Handle
This refrigerator allows the owner to change the door
swing if desired. The hinging of the doors can be changed
to the opposite side anytime you wish.
swing if desired. The hinging of the doors can be changed
to the opposite side anytime you wish.
w
w
Warning Electric Shock Hazard
Disconnect electrical supply to refrigerator before installing.
Failure to do so could result in death or serious injury.
Failure to do so could result in death or serious injury.
When reversing the door swing :
Read the instructions all the way through before starting.
• Handle parts carefully to avoid scratching paint.
• Set screws/bolts down by their related parts to avoid
using them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT
Once you begin, do not move the cabinet until door-swing
reversal is completed.
reversal is completed.
These instructions are for changing the hinges from the
right side to the left side-if you ever want to change the
hinges back to the right side, follow these same
instructions and reverse all references to left and right.
right side to the left side-if you ever want to change the
hinges back to the right side, follow these same
instructions and reverse all references to left and right.
Before Removing the Doors, empty and Remove all the
Door Baskets of both Refrigerator/ Freezer Doors,
including the Bank Dairy. Close both doors before
removing hinge pins.
Door Baskets of both Refrigerator/ Freezer Doors,
including the Bank Dairy. Close both doors before
removing hinge pins.
Caution :
Do not let either door drop to the floor. Doing so could
damage the Door Stop.
damage the Door Stop.
When reversing the door swing :
Read the instructions all the way through before starting.
• Handle parts carefully to avoid scratching paint.
• Set screws down by their related parts to avoid using
them in the wrong places.
• Provide a non-scratching work surface for the doors.
IMPORTANT
Once you begin, do not move the cabinet until door-swing
reversal is completed.
reversal is completed.
These instructions are for changing the hinges from the
right side to the left side-if
right side to the left side-if
you ever want to change the hinges back to the right side,
follow these same
follow these same
instructions and reverse all references to left and right.
w
w
Warning Electric Shock Hazard
Disconnect electrical supply to refrigerator before starting
the Door -reversal. Failure
the Door -reversal. Failure
to do so could result in death or serious injury.
Before Removing the Doors ,empty and Remove all the
Door Baskets of both Refrigerator/
Door Baskets of both Refrigerator/
Freezer Doors ,including the Bank Dairy. Close both doors
before removing hinge pins
before removing hinge pins
Caution :
Do not let either door drop to the floor. Doing so could
damage the Door Stop.
damage the Door Stop.
INSTRUCTIONS FOR REVERSING DOOR SWING
- 7 -
1) Remove screws(3) after removing a CAP(2) from the
side of the refrigerator room HANDLE(1). Remove
screws(2) on the bottom of the refrigerator room
HANDLE(1). The freezer room HANDLE(5) may be also
disassembled in a same may as the refrigerator room
HANDLE(1).
screws(2) on the bottom of the refrigerator room
HANDLE(1). The freezer room HANDLE(5) may be also
disassembled in a same may as the refrigerator room
HANDLE(1).
2) Remove the screws(6) in the DECO COVER(7).
Remove the DECO COVER(7) and move the COVER
HINGE(8) to side of DECO COVER(7). Disassemble the
Housing Connector(9) inside of the DECO COVER(7).
HINGE(8) to side of DECO COVER(7). Disassemble the
Housing Connector(9) inside of the DECO COVER(7).
3) Remove the screws(10) in the COVER-PWB(11), and
remove the COVER-PWB(11).
4) Remove the screws(12) in the TOP COVER FRONT(13)
and remove the TOP COVER FRONT (13).
5) Remove the HOLDER CORD (14) placed in right and
insert it to center. And then move COVER FRONT(16).
Take out the HOLDER CORD(spare) (15) and to place
in the center of TOP COVER FRONT(13), and insert to
the left side.
Take out the HOLDER CORD(spare) (15) and to place
in the center of TOP COVER FRONT(13), and insert to
the left side.
- 8 -
(2)
(3)
(3)
(5)
(4)
(4)
(1)
(8)
(9)
(12)
(12)
(13)
(15)
(16)
(14)
(6)
(7)
(6)
(10)
(10)
(11)
6) Take out the LEAD WIRE(17) assembly from the TOP
COVER FRONT(13) and assemble it on left side.
7) Remove bolts(18) securing HINGE-U(19). Unscrew of
the hinge pin(20).
Place HINGE-U and seat hinge upside down and apply
them to left side of the refrigerator.
NOTE: Seat hinge to be placed under the HINGE-
U(19).
Place HINGE-U and seat hinge upside down and apply
them to left side of the refrigerator.
NOTE: Seat hinge to be placed under the HINGE-
U(19).
8) Remove bolts(22) securing HINGE-
C(23) and then remove HINGE-C(23).
Remove the freezer door. Move in left
side of the refrigerator CAP(24). Move
to left side of the refrigerator door
BRACKET DOOR(25) and screw(26).
Remove the freezer door. Move in left
side of the refrigerator CAP(24). Move
to left side of the refrigerator door
BRACKET DOOR(25) and screw(26).
9) Remove screws(27) and COVER(28)
and move CAP COVER(29).
And remove bolts(30), HINGE-L(31),
and move PIN(32).
And remove bolts(30), HINGE-L(31),
and move PIN(32).
10) Assemble the HINGE-L(31)
➝ COVER(28) ➝ Freezer Door ➝ HINGE-C(23) ➝ Refrigerator Door ➝ HINGE-U(19) ➝
TOP COVER FRONT(13)
➝ COVER PWB(11) ➝ Connect the Housing Connector(9) ➝ DECO COVER(7) ➝
HANDLE(1) (5)
Note:
Reversing the doors is not covered by the warranty.
- 9 -
(17)
(13)
(19)
(20)
(18)
(21)
(24)
(23)
(22)
(25)
(26)
(32)
(31)
(30)
(27)
(28)
(29)
Click on the first or last page to see other GA-449 service manuals if exist.