DOWNLOAD LG GA-449 Service Manual ↓ Size: 3.45 MB | Pages: 48 in PDF or view online for FREE

- 5 -

DIMENSONS(mm)

595(W)X683(D)X2,000/1,850(H)

NET WEIGHT(kg)

84 / 75

COOLING SY STEM

DIRECT COOLING

TEMPERATURE CONTROL ELECTRIC CONTROL

DEFROSTING SYSTEM

FULL AUTOMATIC

DOOR FINISH

PRE-COATED METAL OR

VINIL COATED METAL

OUT CASE

PAINTED ST EEL SHEET

INNER CASE

ABS

INSULATION

POLY URETHANE FOME

REFRIGERANT

R600A(75g)

LUBRICATION OIL

FREOL S10(280cc)

COMPRESSOR

PTC STARTING

EVAPORATOR

PIPE ON SHEET

CONDENSER

WALL CONDENSER

TRANSPARENT SHELF(NORMAL)

4

VEGETABLE CORNER

1

EGG T RAY

3

BASKET

3

2 BOTTLE BASKET 

1

BOTTLE GUIDE

3

ICE TEAY

1

PIZZA NOOK

2

TRAY DRAWER(GA-479)

4

TRAY DRAWER(GA-449)

3

REFRIGERATOR

COMPARTMENT

DOOR BASKET

FREEZER

COMPARTMENT

- 6 -

NOTE : This is a basic model. The shape of refrigerator is subject to change.

This refrigerator allows the owner to change the door
swing if desired. The hinging of the doors can be changed
to the opposite side anytime you wish.

w

w

Disconnect electrical supply to refrigerator before installing.
Failure to do so could result in death or serious injury.

Read the instructions all the way through before starting.

• Handle parts carefully to avoid scratching paint.

• Set screws/bolts down by their related parts to avoid

using them in the wrong places.

• Provide a non-scratching work surface for the doors.

Once you begin, do not move the cabinet until door-swing
reversal is completed.

These instructions are for changing the hinges from the
right side to the left side-if you ever want to change the
hinges back to the right side, follow these same
instructions and reverse all references to left and right.

Before Removing the Doors, empty and Remove all the
Door Baskets of both Refrigerator/ Freezer Doors,
including the Bank Dairy. Close both doors before
removing hinge pins.

Do not let either door drop to the floor. Doing so could
damage the Door Stop.

Read the instructions all the way through before starting.

• Handle parts carefully to avoid scratching paint.

• Set screws down by their related parts to avoid using

them in the wrong places.

• Provide a non-scratching work surface for the doors.

Once you begin, do not move the cabinet until door-swing
reversal is completed.

These instructions are for changing the hinges from the
right side to the left side-if

you ever want to change the hinges back to the right side,
follow these same

instructions and reverse all references to left and right.

w

w

Disconnect electrical supply to refrigerator before starting
the Door -reversal. Failure

to do so could result in death or serious injury.

Before Removing the Doors ,empty and Remove all the
Door Baskets of both Refrigerator/

Freezer Doors ,including the Bank Dairy. Close both doors
before removing hinge pins 

Do not let either door drop to the floor. Doing so could
damage the Door Stop.

- 7 -

1) Remove screws(3) after removing a CAP(2) from the

side of the refrigerator room HANDLE(1). Remove
screws(2) on the bottom of the refrigerator room
HANDLE(1). The freezer room HANDLE(5) may be also
disassembled in a same may as the refrigerator room
HANDLE(1).

2) Remove the screws(6) in the DECO COVER(7).

Remove the DECO COVER(7) and move the COVER
HINGE(8) to side of DECO COVER(7). Disassemble the
Housing Connector(9) inside of the DECO COVER(7).

3) Remove the screws(10) in the COVER-PWB(11), and

remove the COVER-PWB(11).

4) Remove the screws(12) in the TOP COVER FRONT(13)

and remove the TOP COVER FRONT (13).

5) Remove the HOLDER CORD (14) placed in right and

insert it to center. And then move COVER FRONT(16).
Take out the HOLDER CORD(spare) (15) and to place
in the center of TOP COVER FRONT(13), and insert to
the left side.

- 8 -

(2)

(3)

(3)

(5)

(4)

(4)

(1)

(8)

(9)

(12)

(12)

(13)

(15)

(16)

(14)

(6)

(7)

(6)

(10)

(10)

(11)