DOWNLOAD LG LS-J0763EL Service Manual ↓ Size: 4.3 MB | Pages: 127 in PDF or view online for FREE

• On while in appliance operation, off while in appliance pause
• Flashing while in disconnection or short in Thermistor (3 sec off / 0.5 sec on)

• On while in sleep timer mode, off when sleep timer cancel or appliance operation pause

• On while in timer mode (on/off), off when timer mode is completed or canceled.

• While in appliance operation, on while in outdoor unit compressor running, off while in compressor off

• On while in appliance operation, off while in appliance pause
• Flashing while in disconnection or short in Thermistor (3 sec off / 0.5 sec on)

• On while in sleep timer mode, off when sleep timer cancel or appliance operation pause

• On while in timer mode (on/off), off when timer mode is completed or canceled

• Off except when hot start during heating mode operation or while in defrost control

■

• When the intake air temperature reaches 0.5°C below the setting temp, the compressor and the outdoor fan

stop.

• When it reaches 0.5°C above the setting temp, they start to operate again.

Compressor ON Temp 

➲ 

Setting Temp+0.5°C

Compressor OFF Temp

➲

Setting Temp-0.5°C

• While in compressor running, operating with the airflow speed set by the remote control. While in compressor

not running, operating with the low airflow speed regardless of the setting.

■

• When the dehumidification operation input by the remote control is received, the intake air temperature is

detected and the setting temp is automatically set according to the intake air temperature.

26°C 

≤

Intake Air Temp     

➲ 

25°C

24°C 

≤

Intake Intake Air Temp<26°C

➲ 

Intake Air Temp-1°C

18°C 

≤

Intake Intake Air Temp<24°C

➲ 

Intake Air Temp-0.5°C

Intake Air Temp<18°C

➲ 

18°C

-13-

• While in compressor off, the indoor fan repeats low airflow speed and pause.
• While the intake air temp is between compressor on temp. and compressor off temp., 10-min dehumidifica-

tion operation and 4-min compressor off repeat.

Compressor ON Temp.

➲

Setting Temp+0.5°C

Compressor OFF Temp.

➲

Setting Temp-0.5°C

• In 10-min dehumidification operation, the indoor fan operates with the low airflow speed.

■

• When the intake air temp reaches +3°…above the setting temp, the compressor is turned off.  When below

the setting temp, the compressor is turned on.

Compressor ON Temp.

➲

Setting Temp.

Compressor OFF Temp.

➲

Setting Temp.+3°C 

• While in compressor on, the indoor fan is off when the indoor pipe temp. is below 20°C, when above 28°C , it

operates with the low or setting airflow speed. When the indoor pipe temp is between 20°C and 28°C, it oper-
ates with Super-Low(while in sleep mode, with the medium airflow speed).

• While in compressor off, the indoor fan is off when the indoor pipe temp is below 33°C, when above 35°C , it

operates with the low airflow speed.

• If overloaded while in heating mode operation, in order to prevent the compressor from OLP operation, the

outdoor fan is turned on/off according to the indoor pipe temp.

• While in defrost control, both of the indoor and outdoor fans are turned off.

■

• While in heating mode operation in order to protect the evaporator pipe of the outdoor unit from freezing,

reversed to cooling cycle to defrost the evaporator pipe of the outdoor unit.

• Defrost control is available 60 min. later since heating mode operation started, and it will not prolong over 12

min.

• Defrost control is carried out according to the following priority order while in heating mode operation.

1st priority: Defrost control is carried out according to the indoor pipe temp 60 min. later since heating mode

operation started.

2nd priority : The temp differences between the indoor pipe temp and the intake air temp 25 min. later (

∆

T1)

and 60 min. later (

∆

T2) since heating mode operation started are measured, then defrost control

is carried out according to the difference (

∆

T=

∆

T1-

∆

T2).

3rd priority : Defrost control is carried out according to the temp difference (

∆

TE=TE1-TE2) between the

indoor pipe temperatures of 25 min later (TE1) and 60 min later (TE2) after heating mode opera-
tion started.

• When the indoor pipe temp is 41°C or above, defrost control is not carried out even if the condition is one of

the defrost conditions above.

• While in defrost control, the compressor is on and the indoor fan, the outdoor fan, and the 4 way valve are off.

-14-

-15-

■ 

• According to the temperature set by Fuzzy rule, when the intake air temp is 0.5°C or more below the setting

temp, the compressor is turned off. When 0.5°C or more above the setting temp, the compressor is turned on.

Compressor ON Temp   

➲

Setting Temp + 0.5°C

Compressor OFF Temp 

➲

Setting Temp + 0.5°C

• At the beginning of Fuzzy mode operation, the setting temperature is automatically selected according to the

intake air temp at that time.

26°C 

≤

Intake Air Temp      

➲

25°C

24°C 

≤

Intake Air Temp < 26°C 

➲

Intake Air Temp + 1°C

22°C 

≤

Intake Air Temp < 24°C 

➲

Intake Air Temp + 0.5°C

18°C 

≤

Intake Air Temp < 22°C 

➲

Intake Air Temp

Intake Air Temp<18°C

➲ 

18°C

• When the Fuzzy key (Temperature Control key) is input after the initial setting temperature is selected, the

Fuzzy key value and the intake air temperature at that time are compared to select the setting temperature
automatically according to the Fuzzy rule. 

• While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the 

temperature.

■

• When any of operation mode is not selected like the moment of the power on or when 3 hrs has passed since

the operation off, the operation mode is selected.

• When determining the operation mode, the compressor, the outdoor fan, and the 4 way valve are off and only

the indoor fan is operated for 15 seconds.  Then an operation mode is selected according to the intake air
temp at that moment as follows.

24°C 

≤

Inatake Air Temp   

➲

Fuzzy Operation for Cooling

21°C 

≤

Inatake Air Temp<24°C

➲

Fuzzy Operation for Dehumidification

Inatake Air Temp<21°C 

➲

Fuzzy Operation for Heating

• If any of the operation modes among cooling / dehumidification / heating mode operations is carried out for 10

sec or longer before Fuzzy operation, the mode before Fuzzy operation is operated.

• According to the setting temperature selected by Fuzzy rule, when the intake air temp is 0.5°C or more below

the setting temp, the compressor is turned off.  When 0.5°C or more above the setting temp, the compressor
is turned on.

Compressor ON Temp  

➲

Setting Temp +0.5°C

Compressor OFF Temp 

➲

Setting Temp + 0.5°C

• At the beginning of Fuzzy mode operation, the setting temperature is automatically selected according to the

intake air temp at that time.

26°C

≤

Intake Air Temp      

➲

25°C

24°C

≤

Intake Air Temp<26°C 

➲

Intake Air Temp + 1°C

22°C

≤

Intake Air Temp<24°C 

➲

Intake Air Temp + 0.5°C

18°C

≤

Intake Air Temp<22°C 

➲

Intake Air Temp

Intake Air Temp<18°C       

➲

18°C

• When the Fuzzy key (Temperature Control key) is input after the initial setting temperature is selected, the

Fuzzy key value and the intake air temperature at that time are compared to select the setting temperature
automatically according to the Fuzzy rule.

• While in Fuzzy operation, the airflow speed of the indoor fan is automatically selected according to the tem-

perature.

-16-

• According to the setting temperature selected by Fuzzy rule, when the intake air temp is 0.5°C or more below

the setting temp, the compressor is turned off.  When 0.5°C or more above the setting temp, the compressor
is turned on.

Compressor ON Temp 

➲

Setting Temp + 0.5°C

Compressor OFF Temp 

➲

Setting Temp+0.5°C

• At the beginning of Fuzzy mode operation, the setting temperature is automatically selected according to the

intake air temp at that time.

26°C 

≤

Intake Air Temp 

➲

25°C

24°C 

≤

Intake Air Temp<26°C 

➲

Intake Air Temp+1°C

22°C 

≤

Intake Air Temp<24°C 

➲ 

Intake Air Temp+0.5°C

18°C 

≤

Intake Air Temp<22°C 

➲

Intake Air Temp

Intake Air Temp<18°C    

➲

18°C

• When the Fuzzy key (Temperature Control key) is input after the initial setting temperature is selected, the

Fuzzy key value and the intake air temperature at that time are compared to select the setting temperature
automatically according to the Fuzzy rule.

• While in Fuzzy operation, the airflow speed of the indoor fan repeats the low airflow speed or pause as in

dehumidification operation.

• According to the setting temperature selected by Fuzzy rule, when the intake air temp is 3°C or more above

the setting temp, the compressor is turned off.  When below the setting temp, the compressor is turned on.

Compressor ON Temp 

➲

Setting Temp

Compressor OFF Temp 

➲

Setting Temp + 3°C

• At the beginning of Fuzzy mode operation, the setting temperature is automatically selected according to the

intake air temp at that time.

20°C

≤

Intake Air Temp 

➲

Intake Air Temp + 0.5°C

Intake Air Temp<20°C 

➲

20°C

• When the Fuzzy key (Temperature Control key) is input after the initial setting temperature is selected, the

Fuzzy key value and the intake air temperature at that time are compared to select the setting temperature
automatically according to the Fuzzy rule.

• While in Fuzzy operation, the airflow speed of the indoor fan is set to the high or the medium according to the

intake air temperature and the setting temperature.

■ 

• The airflow speed of the indoor fan is set to high, medium, low, or chaos (auto) by the input of the airflow

speed selection key on the remote control.

■

• When the set time is reached after the time is input by the remote control, the appliance starts to operate.
• The timer LED is on when the on-timer is input.  It is off when the time set by the timer is reached.
• If the appliance is operating at the time set by the timer, the operation continues.