DOWNLOAD LG LS-J0761NL_NM_NN / LS-J0962NL_NM_NN / LS-L1261NL_NM_NN Service Manual ↓ Size: 3.1 MB | Pages: 75 in PDF or view online for FREE

Model
LS-J0761NL_NM_NN LS-J0962NL_NM_NN LS-L1261NL_NM_NN
Pages
75
Size
3.1 MB
Type
PDF
Document
Service Manual
Brand
Device
Air Conditioner
File
ls-j0761nl.zip
Date

LG LS-J0761NL_NM_NN / LS-J0962NL_NM_NN / LS-L1261NL_NM_NN Service Manual ▷ View online

Disassembly of the parts (Indoor unit)
Warning :
Disconnect the unit from power supply before making
any checks.
Be sure the power switch is set to “OFF”. 
To remove the Grille from the Chassis. 
• Set the up-and-down air discharge louver to open
position (horizontally) by finger pressure.
• Remove the securing screws
(7k, 9k Btu models: 2EA, 12K Btu models: 3EA).
• To remove the Grille, pull the lower left and right
side of the grille toward you (slightly tilted) and lift it
straight upward.
1. To remove the sensor, housing connect, earth
conductor & step motor conductor with sensor
holder, Motor, Evaporator & P.C.B.
-41-
2. To remove the Control Box.
• Remove 2 or 4 securing screws. 
• Pull the control box out from the chassis
carefully.
3.  To remove the Evaporator. 
• Remove 3 screws securing the evaporator(at the
left 1EA, at the right 2EA).
• Remove 3 screws securing the evaporator (at the
left 2 EA, in the Eva Holder, at the right 1EA):
only LS-J series
-42-
• Unhook the tab on the right inside of the chassis
at the same time, slightly pull the evaporator
toward you until the tab is clear of the slot. 
4. To remove the Cross-Flow Fan
• Loosen the screw securing the cross-flow fan to
the fan motor (do not remove).
• Lift up the right side of the cross-flow fan and the
fan motor, separate the fan motor from the
cross-flow fan.
• Remove the left end of the cross-flow fan from
the self-aligning bearing. 
-43-
• Unhook the tab on the right inside of the chassis
at the same time, slightly pull the evaporator
toward you until the tab is clear of the slot. 
4. To remove the Cross-Flow Fan
• Loosen the screw securing the cross-flow fan to
the fan motor (do not remove).
• Lift up the right side of the cross-flow fan and the
fan motor, separate the fan motor from the
cross-flow fan.
• Remove the left end of the cross-flow fan from
the self-aligning bearing. 
-43-
Page of 75
Display

LG LS-J0761NL_NM_NN / LS-J0962NL_NM_NN / LS-L1261NL_NM_NN Service Manual ▷ Download