LG LS-H076QLL0_QGL0_QGA2 / LS-H096QLL1_QGL1 / LS-H096QGA2_QLA2_QLA1_QPA1 / LS-H126RLM1 / AS-H076QLA0_QNA0_QLL0 / AS-H096RLL0_RNA0 / AS- Service Manual ▷ View online
P/No.: 3828A20400A
April, 2004
8 Room Air Conditioner
Use a soft cloth to clean. Do not use harsh
detergents, solvents, etc.
detergents, solvents, etc.
Do not touch the metal parts of the product
when removing the air filter. They are very
sharp!
when removing the air filter. They are very
sharp!
• There is risk of fire, electric shock, or damage to the
plastic parts of the product.
• There is risk of personal injury.
Do not step on or put anyting on the product.
(outdoor units)
(outdoor units)
Do not insert hands or other objects through
the air inlet or outlet while the air conditioner
is plugged in.
the air inlet or outlet while the air conditioner
is plugged in.
• There is risk of personal injury and failure of product.
• There are sharp and moving parts that could cause
personal injury.
■
Operation
Wa
x
Safety Precautions
Service Manual 9
Dimensions
Dimensions
Installation plate
D
H
W
W
mm
824
H
mm
260
D
mm
155
Model
Dimension
7, 9 k Btu Series
Indoor Unit
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that could cause harm to the
air conditioner.
air conditioner.
This symbol indicates special notes.
NOTICE
Symbols Used in this Manual
ENGLISH
INSTALLATION INSTRUCTIONS
SINGLE SPLIT WALL MOUNTED AIR CONDITIONER
1. Type "A" screw
2. Installation Plate
3. Type "B" screw
4. Holder Remote Control
4. Holder Remote Control
Air filter
Installation plate
Sleeve
Bushing-Sleeve
Putty(Gum Type Sealer)
Sleeve
Bushing-Sleeve
Putty(Gum Type Sealer)
Bend the pipe as closely
on the wall as possible,
but be careful that it
doesn't break.
on the wall as possible,
but be careful that it
doesn't break.
Installation parts you
must purchase
must purchase
Vinyl tape (Wide)
• Apply after carrying out a
drainage test.
• To carry out the drainage
test, remove the air filters
and pour water into the heat
exchanger.
drainage test.
• To carry out the drainage
test, remove the air filters
and pour water into the heat
exchanger.
Saddle
Gas side piping (Optional Parts)
Liquid side piping (Optional Parts)
Additional drain pipe
Liquid side piping (Optional Parts)
Additional drain pipe
Vinyl tape (Narrow)
Connecting cable
(Optional Parts)
(Optional Parts)
P/No.: 3828A20169A
(Split - Series)
• Please read this instruction sheet completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized
• When the power cord is damaged, replacement work shall be performed by authorized
personnel only.
• Installation work must be performed in accordance with the national wiring standards by
authorized personnel only.
Installation Parts Provided
• This illustration is for explanation purposes only.
• The indoor unit will actually face a different way.
• Copper lines must be insulated independently.
• The indoor unit will actually face a different way.
• Copper lines must be insulated independently.
Click on the first or last page to see other LS-H076QLL0_QGL0_QGA2 / LS-H096QLL1_QGL1 / LS-H096QGA2_QLA2_QLA1_QPA1 / LS-H126RLM1 / AS-H076QLA0_QNA0_QLL0 / AS-H096RLL0_RNA0 / AS- service manuals if exist.