DOWNLOAD LG LS-H0561AL_AMBZMOS Service Manual ↓ Size: 3.17 MB | Pages: 81 in PDF or view online for FREE

2

Warning ................................2

Caution .................................3

Preparation before operation ..4

Remote Control Features .....5

Operation Mode Selection ......6

Additional features ..............12

Care and Maintenance .......12

Operation Tips ....................14

Before You 
Call For Service ...............15

To prevent injury to the user or other people and property damage, the
following instructions must be followed.

■

Incorrect operation due to ignoring of instruction will cause harm or
damage, the seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

This symbol indicates the possibility of injury or damage to
properties only.

• Otherwise, it will cause

electrical shock or fire due to
heat generation.

• It will cause electrical shock

or fire due to heat
generation.

• It will cause electrical shock or fire.

• If the supply cord is damaged, it

must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.

• It will cause electrical shock

or fire due to heat
generation.

• It may cause electrical

shock.

• Since the fan rotates at high

speed, this may cause an
injury or damage the unit.

• This could damage your

health.

• If the unit continues to be operated

in an abnormal condition, it may
cause a fire, damage, etc. In this
case, consult your dealer.

• If this is done incorrectly, it may

cause a fire, electric shock, injury
by dropping of the unit, water
leakage, etc. Consult your dealer.

■ 

• Improper installation will cause water leakage, electrical

shock, or fire. Please consult authorized dealer or specialist
for the installation work. Please note fault caused by
improper installation is not covered by warranty.

• Unit must be installed in an easily accessible area. Any

additional cost required to hire a special equipment to
service the unit will be the responsibility of the customer.

11

Slide
Switch

Open the front

panel upward

Slide
Switch

Open the front

panel upward

Operation procedures when the remote control can't be
used.
Open the front panel upward and move the Slide
Switch to the Forced Operation position.
If you want to stop operation, move the Slide Switch to
the Auto Restart or the Remote Control position. 
In case the power comes on again after power failure
on the Forced Operation position, the operating
conditions are automatically set as follows:
During Forced Operation, the initial mode continues.

In case the power comes on again after a power
failure, Test Operation is the function to operate
procedures automatically to the previous
operating conditions.
If you want to use this operation, Open the front
panel upward and move the slide switch to the
Test Operation position.
If you do not want to use this operation, move
the Slide Switch to the Remote Control position.

≥

≤

Operating mode

Cooling

Cooling

Healthy Dehumidification

Heating

Indoor FAN Speed

High

High

Healthy Dehumidification Rule

High

Setting Temperature

22°C

22°C

23°C

24°C

Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.

High

Speed

12

Vertical louver Horizontal louver

Air filters

(behind front panel)

Air outlet vent

Air inlet vent

Gasoline

Powder

❏ 

Turn the system off before cleaning. To
clean, wipe with a soft, dry cloth. Do not
use bleach or abrasives.

The air filters behind the front grille should be
checked and cleaned once every 2 weeks or
more often if neccessary.

❏

Never use any of the followings:

• Water hotter than 40°C

Could cause deformation and/or
discoloration.

• Volatile substances

Could damage the surfaces of the air
conditioner.

Lift the front access panel and pull the filter tab
slightly forward to remove the filter.

Clean the filter with a vacuum or warm, soapy
water.
• If dirt is conspicuous, wash with a

solution of detergent in lukewarm water.

• If hot water (40°C or more) is used, it

may be deformed.

After washing with water, dry well in the
shade.

Re-install the air filter.

1

2

3

4

13

(Side)

(Rear)

Drain
Hose

Air intake
vents

Air outlet
vents

Piping

The heat exchanger coils and panel vents of the
outdoor unit should be checked regularly. If
clogged with dirt or soot, the heat exchanger
and panel 
vents may be professionally steam cleaned.