DOWNLOAD JBL P 80.2 (serv.man14) Service Manual ↓ Size: 4.14 MB | Pages: 16 in PDF or view online for FREE

Model
P 80.2 (serv.man14)
Pages
16
Size
4.14 MB
Type
PDF
Document
Service Manual
Brand
Device
Car Audio
File
p-802-sm14.pdf
Date

JBL P 80.2 (serv.man14) Service Manual ▷ View online

P80.2
2  CHANNEL 
AUTOMOTIVE
POWER AMPLIFIER
TECHNICAL MANUAL
JBL CONSUMER PRODUCTS
250 CROSSWAYS PARK DRIVE, WOODBURY, NY 11797
8500 BALBOA BOULEVARD, NORTHRIDGE, CA91329
WWW.JBL.COM
SPECIFICATIONS
Specifications .........................................................1
Features .................................................................2
Test Conditions and Notes ......................................2
Controls and Connections .....................................3
Mounting the amplifier............................................3
Typical System Configuration (Wiring) ....................4
Printed Circuit Boards (Top View)...................5
Parts Lists...........................................................6~8
Integrated Circuit Diagrams...................................11
Transistor Diagrams..............................................12
Schematic Diagrams...................
Block Diagrams.......................................................9
Packaging Exploded View.....................................10
....................13~14
Amplifier Exploded View........................................15
Number of Channels .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
4 Ohms Stereo   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
2 Ohms Stereo   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
4 Ohms Bridged     .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
T.H.D. @ 4 Ohms rated Power    .  .  .  .  .  .  .  .  .  .  .  .  . 
Frequency Response    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Signal to noise Ratio   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Slew Rate  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Channel Separation  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Damping Factor .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Fuse size. . . . . . . . . . . . . . . . . . .   
Line Level Sensitivity. . . . . . . . . . . . . . .
DC Operating Range. . . . . . . . . . . . . . . 
Length  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Width    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Depth    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Length  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Width    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
Depth    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 
1,2
40W x 2
80W x 2
160W x 1
0.0590
10Hz ~ 50KHz
>90dB
>-13V / us
>60dB
>100
20A x 2
250mV ~ 4V
6V ~ 18V
8 3/4
8 1/8
2 11/16
222
206
68
External Dimensions (Inches)
External Dimensions (mms)
JBL continually strives to improve its products.  New materials, production methods and design refinements are 
introduced into existing models without notice as a routine expression of our design philosophy.  For this reason,
Power Series Multichannel Automotive Amplifiers may differ in some respects from their published specifications 
and descriptions, but will always equal or exceed the original specifications unless otherwise stated.
1
Multichannel Automotive Amplifier
P80.2
controls and connections
Test Conditions and Notes
2-Channel Operation
Advanced MOSFET Oversized Floating Rail Power Supply 
Floating Ground Factory - Head - Unit Speaker - Level input
Variable Input Sensitivity (250mV - 4V)
Fully Complementary Output Stage with Class-A Voltage Amplification
Gold-plated Power, Input and Output Connectors
2-Ohm Stable (Stereo)
All tests to be done, unless otherwise specified, from 10Hz to 50KHz at 14.4V DC into 4 ohm loads and adjust 
the units gain so that with a .775 volt input signal the unit is at its maximum rated output. All measurements 
will be done using an Audio precision system one and the supply voltage.
An A+ line voltage of 14.4V DC shall be applied to the unit under test for all measurements unless otherwise 
specified. The voltage applied to the unit shall be measured at the power connection on the Amplifier.
Signal  Source
Unless otherwise specified, all tests shall be conducted with the Audio Signal Generator output configured to 
be balanced, less than or equal to 50 ohm source impedance, and floating. The signal source "GND" shall be  
connected to the Amplifier PWR GND at the Amplifier.
Output Load
Unless otherwise specified, all tests shall be conducted with 4 ohm resistive loads having less than 10% 
reactive components at any frequency below 75KHz. Each resistor shall have a value that remains within 1% 
while dissipating the rated output of the unit under test.
2
features
Multichannel Automotive Amplifier
P80.2
Controls and Connections
Controls and Connections
Mounting the Amplifier
1. It allows left and right input cchannels to be
    connected to the amplifier using RCA plugs
2. Speaker Output Connector - Connect speaker
    wiring to these connectors. See wiring instruc-
    tions on page 4 for more information.
3. Fuse - 20 Amp ATC type Fuse.
The JBL Power  Series amplifiers can be mounted in virtually any location inside the vehicle.
However, make sure to keep the amplifier away from heater vents or ducts.
1. At the chosen site, use the amplifier as a mounting template and mark the locations of the 
    four mounting holes.
2. Drill a small pilot hole at each marked location.
3. Mount the amplifier and securely tighten the mounting screws.
4. Power Connection for 12V+, GND and REM 
    connections for power wires. See wiring instruc-
    tions on page 4 for more information.
5. Input-Level Control - Adjusts input sensitivity
    for pre-amp level and speaker level inputs.
6. electronic crossover is a 12dB/oct.
    Low pass filter which can be Set at any frequency 
    between 32Hz and 320Hz.
Multichannel Automotive Amplifier
3
P80.2
 +   R   -    -   L   +
HIGH LEVEL
-   L   +                      -    R    +
-
BRIDGED
FUSE 20A
+BATT
REM
POWER
GND
+
R
INPUT 
LEVEL
INPUT MODE
32Hz  320Hz
FREQ
ST         MO
FLAT  HP  LP
X-OVER
4V   250mV
L
INPUTS
.
.
P80.2
1
2
3
4
1
5
8
9
6
7. It allows left and right input channels such as high level
    speaker output signals to be connected to the amplifier
8.This functions L&R channel output in speaker by
   connecting L&R channel input when input mode can
   be set on "ST"
   if setting on "Mono", this functions L&R channel output
   in speaker only by connecting R channel pass. 
9. This switch allows these two amplifier channels to play
    full range,low pass,or high pass
7
1
Page of 16
Display

JBL P 80.2 (serv.man14) Service Manual ▷ Download

  • DOWNLOAD JBL P 80.2 (serv.man14) Service Manual ↓ Size: 4.14 MB | Pages: 16 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the JBL P 80.2 (serv.man14) in PDF for free, which will help you to disassemble, recover, fix and repair JBL P 80.2 (serv.man14) Car Audio. Information contained in JBL P 80.2 (serv.man14) Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.