DOWNLOAD JBL MS6100 Service Manual ↓ Size: 627.86 KB | Pages: 4 in PDF or view online for FREE

Model
MS6100
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
627.86 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Car Audio
File
ms6100.pdf
Date

JBL MS6100 User Manual / Operation Manual ▷ View online

THANK YOU
for purchasing JBL Marine Series speakers. We‘ve 
organized this manual to make your installation as simple 
and trouble-free as possible. Please read it thoroughly before 
proceeding. Remember to keep your sales receipt and this 
manual in a safe place so both are available for future reference.
MARINE SERIES
MS6100
MS6200
MS9200
marine speaker
owner’s manual
ENGLISH
2
INSTALLATION WARNINGS AND TIPS
ABOUT THESE
INSTRUCTIONS:
Installation of marine audio 
components can require extensive
experience with a variety of
mechanical and electrical 
procedures. Although these 
instructions explain how to install
JBL marine speakers in a general
sense, they do not show the exact
installation methods for your 
particular application. If you do not
feel you have the experience, do 
not attempt the installation yourself. 
Ask your authorized JBL marine
audio dealer about professional
installation options.
LOUD MUSIC AND
HEARING: 
Playing loud music in a marine
environment can permanently
damage your hearing, as well as
hinder your ability to hear marine
traffic. The maximum volume levels
achievable with JBL speakers,
combined with high-power
amplification, may exceed safe 
levels for extended listening. 
JBL accepts no liability 
for hearing loss, bodily injury or
property damage as a result of 
use or misuse of this product.
GENERAL CARE:
The loudspeaker grilles may be
cleaned with a damp cloth. Do not
use any cleaners or solvents on the
grilles or the speaker cones.
ABOUT POWER
HANDLING:
JBL marine speakers will produce
reasonable volume levels with little
amplifier power. Moreover, adding 
an amplifier to drive your speakers
and a subwoofer will enhance your
system’s dynamic range and help
overcome ambient noise.
Although JBL marine speakers are
designed to handle the power of a
dedicated amplifier driven at or
below its rated power, make sure
the amplifier is not driven far above
its rated power. Doing so will “clip”
the output signal and can damage
any speaker. Distorted or “fuzzy”
sound from your speakers is an 
indication that the amplifier has
exceeded its rated power, and you
should reduce the volume level.
INSTALLATION TIPS:
• Always wear protective eyewear
when using any tools.
• Turn off all audio components and
other electrical devices before you
start. Disconnect the negative (–)
lead from your battery.
• Keep speakers in their package
until final installation. When mov-
ing a speaker, always rest it with
the cone or dome facing up. Never
use force to install any speaker.
• Check clearances on both sides of
a planned mounting surface before
drilling any holes or installing any
screws. Remember that the screws
can extend behind the surface.
• At the installation sites, locate 
and make a note of all fuel lines
and electrical wiring. Use extreme 
caution when cutting or drilling 
in and around these areas.
• Before drilling or cutting holes, use
a utility knife to remove unwanted
fabric or vinyl to keep material from
snagging in a drill bit or saw.
• The stainless-steel hardware 
provided with your JBL marine
speakers has been chosen to resist
rust and corrosion.
ENGLISH
Figure 1. Mounting the JBL MS6200 marine speaker. The JBL MS9200 and MS6100 marine
speakers (not shown) mount in a similar way.
3
INSTALLATION
ENGLISH
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours 
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this owner’s
manual are in compliance with technical standards: 
EN 61000-6-3:2001
EN 61000-6-1:2001
Klaus Lebherz
Harman Consumer Group International
Chateau-du-Loir, France  3/06
© 2006 Harman International Industries, Incorporated
JBL and Harman International are trademarks of 
Harman International Industries, Incorporated, registered in the 
United States and/or other countries.
Part No. MS6100/6200/9200OM3/06
www.jbl.com
SPECIFICATIONS
MS6100
MS6200
MS9200
6-1/2" Dual-Cone 
6-1/2" 2-Way
6" x 9" 2-Way
Marine Loudspeaker
Marine Loudspeaker
Marine Loudspeaker
Power Handling, RMS
35W
60W
100W
Power Handling, Peak
105W
180W
300W
Sensitivity (2.83V/1m)
91dB
91dB
91dB
Frequency Response
50Hz – 18kHz
50Hz – 20kHz
37Hz – 20kHz
Impedance
4 Ohms
4 Ohms
4 Ohms
Mounting Depth
70mm (2-3/4")
70mm (2-3/4")
85mm (3-5/16")
Cutout Diameter
129mm (5-1/16")
129mm (5-1/16")
153mm x 224mm (6" x 8-13/16")
Overall Diameter
183mm (7-3/16")
183mm (7-3/16")
196mm x 275mm (7-11/16" x 10-13/16")
A valid serial number is required for warranty coverage.
Specifications and appearance are subject to change without notice.
ENGLISH
Display

JBL MS6100 User Manual / Operation Manual ▷ Download

  • DOWNLOAD JBL MS6100 Service Manual ↓ Size: 627.86 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the JBL MS6100 in PDF for free, which will help you to disassemble, recover, fix and repair JBL MS6100 Car Audio. Information contained in JBL MS6100 User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.