JBL CENTURY C 630S (serv.man11) User Manual / Operation Manual ▷ View online
Note:
As a general rule, do not turn up the volume control past the
point where you hear distortion in the form of either signal distortion
from an overdriven amplifier or mechanical noise from an overstressed
speaker.
For the best performance and speaker reliability, you should select an
amplifier with an output rating slightly higher than the maximum
power likely to be used to generate the desired volume levels. This
margin of reserve power will ensure that the amplifier will not attempt
to deliver more power than its design allows.
Warning:
Playing loud music over 120dB can permanently damage
your hearing.
The maximum volume levels achievable with JBL speakers combined
with high power amplification may exceed safe levels for extended
listening. When listening at high volume levels, always use hearing
protection or turn it down!
Liability:
JBL is not responsible for damage caused by misuse of
these speakers or improper installation.
WIRE CONNECTION FOR C530s, C630s, C220s
Figure 3
FOLLOW COLOR CODE ON WIRES AND
CROSSOVER, SEE FIGURE 3 ABOVE.
CROSSOVER, SEE FIGURE 3 ABOVE.
1-Connect to RED
2-Connect to BLACK (Same hole as Wire 3)
3-Connect to BLACK (Same hole as Wire 2)
4-Connect to GREEN
5-Connect to Yellow
Note:
As a general rule, do not turn up the volume control past the
point where you hear distortion in the form of either signal distortion
from an overdriven amplifier or mechanical noise from an overstressed
speaker.
For the best performance and speaker reliability, you should select an
amplifier with an output rating slightly higher than the maximum
power likely to be used to generate the desired volume levels. This
margin of reserve power will ensure that the amplifier will not attempt
to deliver more power than its design allows.
Warning:
Playing loud music over 120dB can permanently damage
your hearing.
The maximum volume levels achievable with JBL speakers combined
with high power amplification may exceed safe levels for extended
listening. When listening at high volume levels, always use hearing
protection or turn it down!
Liability:
JBL is not responsible for damage caused by misuse of
these speakers or improper installation.
WIRE CONNECTION FOR C530s, C630s, C220s
Figure 3
FOLLOW COLOR CODE ON WIRES AND
CROSSOVER, SEE FIGURE 3 ABOVE.
CROSSOVER, SEE FIGURE 3 ABOVE.
1-Connect to RED
2-Connect to BLACK (Same hole as Wire 3)
3-Connect to BLACK (Same hole as Wire 2)
4-Connect to GREEN
5-Connect to Yellow
Note:
As a general rule, do not turn up the volume control past the
point where you hear distortion in the form of either signal distortion
from an overdriven amplifier or mechanical noise from an overstressed
speaker.
For the best performance and speaker reliability, you should select an
amplifier with an output rating slightly higher than the maximum
power likely to be used to generate the desired volume levels. This
margin of reserve power will ensure that the amplifier will not attempt
to deliver more power than its design allows.
Warning:
Playing loud music over 120dB can permanently damage
your hearing.
The maximum volume levels achievable with JBL speakers combined
with high power amplification may exceed safe levels for extended
listening. When listening at high volume levels, always use hearing
protection or turn it down!
Liability:
JBL is not responsible for damage caused by misuse of
these speakers or improper installation.
WIRE CONNECTION FOR C530s, C630s, C220s
Figure 3
FOLLOW COLOR CODE ON WIRES AND
CROSSOVER, SEE FIGURE 3 ABOVE.
CROSSOVER, SEE FIGURE 3 ABOVE.
1-Connect to RED
2-Connect to BLACK (Same hole as Wire 3)
3-Connect to BLACK (Same hole as Wire 2)
4-Connect to GREEN
5-Connect to Yellow
Note:
As a general rule, do not turn up the volume control past the
point where you hear distortion in the form of either signal distortion
from an overdriven amplifier or mechanical noise from an overstressed
speaker.
For the best performance and speaker reliability, you should select an
amplifier with an output rating slightly higher than the maximum
power likely to be used to generate the desired volume levels. This
margin of reserve power will ensure that the amplifier will not attempt
to deliver more power than its design allows.
Warning:
Playing loud music over 120dB can permanently damage
your hearing.
The maximum volume levels achievable with JBL speakers combined
with high power amplification may exceed safe levels for extended
listening. When listening at high volume levels, always use hearing
protection or turn it down!
Liability:
JBL is not responsible for damage caused by misuse of
these speakers or improper installation.
WIRE CONNECTION FOR C530s, C630s, C220s
Figure 3
FOLLOW COLOR CODE ON WIRES AND
CROSSOVER, SEE FIGURE 3 ABOVE.
CROSSOVER, SEE FIGURE 3 ABOVE.
1-Connect to RED
2-Connect to BLACK (Same hole as Wire 3)
3-Connect to BLACK (Same hole as Wire 2)
4-Connect to GREEN
5-Connect to Yellow
Display
