JBL 08 GTi User Manual / Operation Manual ▷ View online
be careful not to mount any pas-
sive crossover components near
wires carrying high currents such
as battery cables or wires lead-
ing to ammeters or tachometers.
sive crossover components near
wires carrying high currents such
as battery cables or wires lead-
ing to ammeters or tachometers.
Distortion is usually the
result of overdriving one or more
components in the system. The
problem is most likely insufficient
amplifier power, or improper set-
ting of gain controls. Refer to
the instructions which came with
the electronics for assistance.
The 08GTi will sound distorted if
it is used without a crossover or
protection network. It will also
not last very long. Never use
the 08GTi without one of the
components in the system. The
problem is most likely insufficient
amplifier power, or improper set-
ting of gain controls. Refer to
the instructions which came with
the electronics for assistance.
The 08GTi will sound distorted if
it is used without a crossover or
protection network. It will also
not last very long. Never use
the 08GTi without one of the
recommended crossover
options.
options.
If you want to talk to us
about any problems, call JBL
Customer Service at 1-800-336-
4JBL(4525) between 9AM and
5PM eastern time.
Customer Service at 1-800-336-
4JBL(4525) between 9AM and
5PM eastern time.
24
08GTi Owners Manual 9/17/98 4:17 PM Page 24
25
Specifications:
Frequency response
without crossover:
3.5kHz - 22kHz
without crossover:
3.5kHz - 22kHz
Frequency response
with supplied protection network:
5Khz - 22kHz
with supplied protection network:
5Khz - 22kHz
I.E.C. power handling with
included 5kHz Protection net-
work: 60 Watts RMS
included 5kHz Protection net-
work: 60 Watts RMS
Power handling with 3.5kHz
18dB/octave active crossover: 60
Watts RMS
18dB/octave active crossover: 60
Watts RMS
Recommended system amp-
lifier power range: 20 Watts–
125 Watts RMS per channel
lifier power range: 20 Watts–
125 Watts RMS per channel
Sensitivity:
92dB @ 2.83V / 1Meter
92dB @ 2.83V / 1Meter
Dimensions:
Overall Diameter:
50mm / 1.95 inches
50mm / 1.95 inches
Height:
18mm / 0.69 inches
18mm / 0.69 inches
Height with angle adapter:
38mm / 1.5 inches
38mm / 1.5 inches
Flush mount
cutout diameter:
54mm / 2
cutout diameter:
54mm / 2
1
⁄
8
inches
Flush mount depth:
23mm / 0.9 inches
23mm / 0.9 inches
08GTi Owners Manual 9/17/98 4:17 PM Page 25
26
Tweeter is angled
in this direction
in this direction
Drill
3
/
32
" (2.9mm)
hole in two places
Drill
11
/
32
" (8.7mm)
holes for wire feed through
08GTi
SURFACE
ANGLE
MOUNT
TEMPLATE
SURFACE
ANGLE
MOUNT
TEMPLATE
08GTi Owners Manual 9/17/98 4:17 PM Page 26
27
h
Drill
3
/
32
" (2.4mm)
holes for
mounting screw
mounting screw
Drill
11
/
32
" (8.7mm)
holes for
wire feed through
wire feed through
08GTi
MOUNTING
PLATE
TEMPLATE
MOUNTING
PLATE
TEMPLATE
08GTi Owners Manual 9/17/98 4:17 PM Page 27
Click on the first or last page to see other 08 GTi service manuals if exist.