JBL 08 GTi User Manual / Operation Manual ▷ View online
Flush Mounting
Instructions
Instructions
a) Use a hole saw or other tool and
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
b) Push the flush mount cup with
the metal spring into the hole that
was cut in step a.
the metal spring into the hole that
was cut in step a.
c) Tighten the larger
3
⁄
4
" spring
mounting screw to lock the flush
mounting cup into the mounting
hole.
mounting cup into the mounting
hole.
14
C
A
B
Flush Mount Cup
FLUSH MOUNT INSTALLATION
Figure C
08GTi Owners Manual 9/17/98 4:17 PM Page 14
d) Secure the mounting plate to the
flush mount cup using three
flush mount cup using three
5
⁄
16
"
screws. Connect the speaker wire
to the tweeter. (See Figure D)
to the tweeter. (See Figure D)
e) Push the tweeter down onto the
mounting plate making sure to line
up the bayonet tabs with the slots
in the tweeter housing.
mounting plate making sure to line
up the bayonet tabs with the slots
in the tweeter housing.
f) Twist the tweeter clockwise
about
about
1
⁄
4
" to lock it into
position.
15
D
F
E
Figure D
FLUSH
MOUNT
INSTALLATION
MOUNT
INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 15
Flush Angle
Mounting Instructions
Mounting Instructions
a) Follow steps a through c in
the Flush Mounting Instructions.
the Flush Mounting Instructions.
b) Secure the flush angle mount
adapter to the flush mount cup
using two
adapter to the flush mount cup
using two
5
⁄
16
" screws as shown
in Figure E.
c) Connect the 08GTi speaker
wires (with crossover) to the
tweeter.
wires (with crossover) to the
tweeter.
d) Press the tweeter down onto
the flush angle mount adapter
lower portion making sure to line
up the snaps with the slots in the
tweeter housing.
the flush angle mount adapter
lower portion making sure to line
up the snaps with the slots in the
tweeter housing.
e) Snap the other portion of the
tweeter down onto the angle
adapter.
tweeter down onto the angle
adapter.
16
08GTi Owners Manual 9/17/98 4:17 PM Page 16
17
Figure E
E
D
Wiring
Use 2-conductor stranded
type, insulated wire to connect
the 08GTi to it’s crossover, and
the crossover to the amplifier. A
minimum wire gauge of 18AWG
is recommended, with larger size
suggested for wire runs longer
than 10 feet.
the 08GTi to it’s crossover, and
the crossover to the amplifier. A
minimum wire gauge of 18AWG
is recommended, with larger size
suggested for wire runs longer
than 10 feet.
The polarity — the positive/
negative orientation of the con-
nections for every speaker to
amplifier connection must be
consistent from left to right chan-
nel to assure proper imaging and
optimum frequency response.
This does not mean that the
nections for every speaker to
amplifier connection must be
consistent from left to right chan-
nel to assure proper imaging and
optimum frequency response.
This does not mean that the
FLUSH
ANGLE
INSTALLATION
ANGLE
INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 17
Click on the first or last page to see other 08 GTi service manuals if exist.