JBL 08 GTi User Manual / Operation Manual ▷ View online
d) Twist the tweeter clockwise
about
about
1
⁄
4
" to lock it
into position.
11
B
A
D
C
Figure A
SURFACE MOUNT INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 11
A
B
D
C
Surface Angle Mounting
Instructions
Instructions
a) Using the Surface Angle
Mount template at the back of
the manual, drill two screw holes
at the desired mounting location.
Secure the Surface angle mount
adapter with two
Mount template at the back of
the manual, drill two screw holes
at the desired mounting location.
Secure the Surface angle mount
adapter with two
3
⁄
4
" sheet metal
screws as shown in figure B.
b) Secure the mounting plate to
surface angle mount adapter
using two
surface angle mount adapter
using two
5
⁄
16
" screws.
c) Run the included speaker wire
with the 08GTi crossover to the
wire through hole and connect
with the 08GTi crossover to the
wire through hole and connect
the wire to the tweeter making
sure to connect + to + and
– to –.
sure to connect + to + and
– to –.
d) Push the tweeter down onto
the mounting plate making sure
to line up the bayonet tabs with
the slots in the tweeter housing.
the mounting plate making sure
to line up the bayonet tabs with
the slots in the tweeter housing.
e) Twist the tweeter clockwise
about
about
1
⁄
4
" to lock it into position.
12
08GTi Owners Manual 9/17/98 4:17 PM Page 12
A
B
D
C
13
Figure B
SURFACE ANGLE INSTALLATION
08GTi Owners Manual 9/17/98 4:17 PM Page 13
Flush Mounting
Instructions
Instructions
a) Use a hole saw or other tool and
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
the Flush Mount Template at the
back of this manual to make a hole
for the flush mount cup in the
desired location. Secure the metal
spring to the flush mount cup using
one metal spring screw as shown
in figure C. Tighten the screw only
enough to keep the metal spring
from falling off.
b) Push the flush mount cup with
the metal spring into the hole that
was cut in step a.
the metal spring into the hole that
was cut in step a.
c) Tighten the larger
3
⁄
4
" spring
mounting screw to lock the flush
mounting cup into the mounting
hole.
mounting cup into the mounting
hole.
14
C
A
B
Flush Mount Cup
FLUSH MOUNT INSTALLATION
Figure C
08GTi Owners Manual 9/17/98 4:17 PM Page 14
Click on the first or last page to see other 08 GTi service manuals if exist.