JBL TLX 271P (serv.man4) User Manual / Operation Manual ▷ View online
If your receiver has a subwoofer output:
– +
– +
– +
– +
Speaker Outputs
Subwoofer Output
RIGHT LEFT
RIGHT LEFT
RIGHT
LEFT
Normal Direct
SUBWOOFER SECTION
LINE INPUTS
SUBWOOFER SECTION
LINE INPUTS
SUBWOOFER SECTION
LINE INPUTS
SUBWOOFER SECTION
LINE INPUTS
Normal Direct
– +
– +
– +
– +
Speaker Outputs
Subwoofer Output
RIGHT LEFT
RIGHT LEFT
RIGHT
LEFT
Normal Direct
Normal Direct
OR
Note: Some receivers/ampli-
fiers have a single (mono)
subwoofer output. In this
case, it is necessary to use a
“Y”-connector (not included)
to properly hook up the
speakers using this method.
fiers have a single (mono)
subwoofer output. In this
case, it is necessary to use a
“Y”-connector (not included)
to properly hook up the
speakers using this method.
The TLX271P incorporates two
different types of line-level
inputs that allow you to
optimize the loudspeaker’s
performance in your system.
If your receiver/processor’s
subwoofer output is already
low-pass filtered, meaning the
high frequencies have been
different types of line-level
inputs that allow you to
optimize the loudspeaker’s
performance in your system.
If your receiver/processor’s
subwoofer output is already
low-pass filtered, meaning the
high frequencies have been
removed by the receiver, use
the subwoofer input labeled
Direct.
If your receiver/processor’s
subwoofer output is full range,
meaning the high frequencies
have not been removed by the
receiver, use the subwoofer
input labeled Normal.
the subwoofer input labeled
Direct.
If your receiver/processor’s
subwoofer output is full range,
meaning the high frequencies
have not been removed by the
receiver, use the subwoofer
input labeled Normal.
If you are unsure as to which
type of subwoofer output your
receiver/processor contains,
please consult your receiver/
processor owner’s manual or
contact the manufacturer.
Do not hook up both inputs.
Doing so will adversely affect
the performance of the system.
type of subwoofer output your
receiver/processor contains,
please consult your receiver/
processor owner’s manual or
contact the manufacturer.
Do not hook up both inputs.
Doing so will adversely affect
the performance of the system.
Line
Speaker
INPUT
Select
Select
Set Input Select switch to
“Line.”
“Line.”
TLX 271P OM 7/17/98 4:17 PM Page 5
©
1998 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
Part No. TLX271POM 7/98
A Harman International Company
SYSTEM
TLX271P
Frequency Response (–6dB):
30Hz – 25kHz
Subwoofer Amplifier:
100 watts
Recommended Maximum
Amplifier Power*:
150 watts
Sensitivity @ 1 watt/1 meter:
90dB
Nominal Impedance:
8 ohms
Crossover Frequencies:
120Hz, 600Hz, 4000Hz
Subwoofer:
8"
Mid-Bass:
6-1/2"
Midrange:
4"
Tweeter:
10mm titanium laminate
Finish:
black-ash, wood-grain vinyl
Dimensions (H x W x D):
35-7/8 x 10-1/4 x 11-3/4"
911 x 260 x 298mm
911 x 260 x 298mm
Weight (each):
55 lbs/25 kg
*The maximum recommended
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
Occasional refinements may be
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
Specifications
TLX 271P OM 7/17/98 4:17 PM Page 6
©
1998 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
Part No. TLX271POM 7/98
A Harman International Company
SYSTEM
TLX271P
Frequency Response (–6dB):
30Hz – 25kHz
Subwoofer Amplifier:
100 watts
Recommended Maximum
Amplifier Power*:
150 watts
Sensitivity @ 1 watt/1 meter:
90dB
Nominal Impedance:
8 ohms
Crossover Frequencies:
120Hz, 600Hz, 4000Hz
Subwoofer:
8"
Mid-Bass:
6-1/2"
Midrange:
4"
Tweeter:
10mm titanium laminate
Finish:
black-ash, wood-grain vinyl
Dimensions (H x W x D):
35-7/8 x 10-1/4 x 11-3/4"
911 x 260 x 298mm
911 x 260 x 298mm
Weight (each):
55 lbs/25 kg
*The maximum recommended
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
Occasional refinements may be
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
Specifications
TLX 271P OM 7/17/98 4:17 PM Page 6
©
1998 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
Part No. TLX271POM 7/98
A Harman International Company
SYSTEM
TLX271P
Frequency Response (–6dB):
30Hz – 25kHz
Subwoofer Amplifier:
100 watts
Recommended Maximum
Amplifier Power*:
150 watts
Sensitivity @ 1 watt/1 meter:
90dB
Nominal Impedance:
8 ohms
Crossover Frequencies:
120Hz, 600Hz, 4000Hz
Subwoofer:
8"
Mid-Bass:
6-1/2"
Midrange:
4"
Tweeter:
10mm titanium laminate
Finish:
black-ash, wood-grain vinyl
Dimensions (H x W x D):
35-7/8 x 10-1/4 x 11-3/4"
911 x 260 x 298mm
911 x 260 x 298mm
Weight (each):
55 lbs/25 kg
*The maximum recommended
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
amplifier power rating will ensure
proper system headroom to allow
for occasional peaks. We do not
recommend sustained operation at
these maximum power levels.
Occasional refinements may be
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
made to existing products without
notice, but will always meet or
exceed original specifications
unless otherwise stated.
Specifications
TLX 271P OM 7/17/98 4:17 PM Page 6
Display
