JBL SU 7000 User Manual / Operation Manual ▷ View online
SU1000
SU3000
SU5000
SU7000
SU3000
SU5000
SU7000
simple setup
guide
guide
thank you
for choosing JBL. For over 50 years, JBL has
been involved in every aspect of musical and film recording and
reproduction, from live performances to monitoring the recordings
you play in your home, car, or office.
We’re confident that the
JBL loudspeakers
you have
chosen will provide every note of enjoyment that you expected –
and that when you think about purchasing additional audio
equipment for your home, car, or office, you will once again
choose JBL.
Please take a moment to complete the enclosed profile card. It
enables us to keep you posted on our latest advancements, and
helps us to better understand our customers and build products
that meet your needs and expectations.
JBL Consumer Products
SU Series OM 7/22/98 3:13 PM Page 1
one.
Speaker Placement
SU1000, SU3000
SU5000, SU7000
SU Series OM 7/22/98 3:13 PM Page 2
Troubleshooting
two.
Speaker Connections
Connection Tips
Speakers and electronics terminals have corresponding (+) and
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
If there is no sound from
any of the speakers, check
the following:
any of the speakers, check
the following:
• Receiver/amplifier is on an d
a source is playing.
• Review proper operation of
your receiver/amplifier.
a source is playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and connec -
tions between receiver/
amplifier and speakers.
• Make sure all wires are con -
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair o f
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
tions between receiver/
amplifier and speakers.
• Make sure all wires are con -
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair o f
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
If there is low bass output,
check the following:
check the following:
• Make sure the polarity
(+ and –) of the left an d
right “Speaker Inputs” are
connected properly.
(+ and –) of the left an d
right “Speaker Inputs” are
connected properly.
SU Series OM 7/22/98 3:13 PM Page 3
JBL Cons u mer Pro ducts
80 Crossways Park West, Wo o d b u r y, NY 11 797
8500 Balboa Boulevard, No r t h r idge, CA 91329
w w w. j b l . c o m
80 Crossways Park West, Wo o d b u r y, NY 11 797
8500 Balboa Boulevard, No r t h r idge, CA 91329
w w w. j b l . c o m
©
1997 JBL, Inc o r p o ra t e d. JBL is a re g i s t e re d tra de mark
of JBL, Inc o r p o ra t e d.
5/97
5/97
Part No. SUOM
Specifications
Occasional refinements may
be made to existing products
without notice, but will
always meet or exceed origi-
nal specifications unless
otherwise stated.
be made to existing products
without notice, but will
always meet or exceed origi-
nal specifications unless
otherwise stated.
*The maximum recommended
amplifier power rating will
ensure proper system head-
room to allow for occasional
peaks. We do not recommend
sustained operation at these
maximum power levels.
amplifier power rating will
ensure proper system head-
room to allow for occasional
peaks. We do not recommend
sustained operation at these
maximum power levels.
SYSTEM
SU1000
SU3000
Frequency Response (–6dB):
50Hz – 20kHz
45Hz – 20kHz
Recommended Maximum
Power Handling*:
125 watts
150 watts
Sensitivity @ 1 watt/1 meter:
90dB
92dB
Normal Impedance:
8 ohms
8 ohms
Crossover Frequency:
3500Hz
3500Hz
Woofer:
8 inches
8 inches
Midrange:
N/A
6-1/2 inches
Tweeter:
14mm
14mm
Dimensions (H x W x D):
19-1/4 x 10 x 10 inches
24 x 10 x 12 inches
489 x 254 x 254mm
610 x 254 x 305mm
Weight (each):
18 lbs/8.2 kg
29 lbs/13.2 kg
SYSTEM
SU5000
SU7000
Frequency Response (–6dB):
42Hz – 20kHz
40Hz – 20kHz
Recommended Maximum
Power Handling*:
150 watts
175 watts
Sensitivity @ 1 watt/1 meter:
92dB
92dB
Normal Impedance:
8 ohms
8 ohms
Crossover Frequency:
3500Hz
3500Hz
Woofer:
8 inches
10 inches
Midrange:
6-1/2 inches
6-1/2 inches
Tweeter:
14mm
14mm
Dimensions (H x W x D):
32-3/16 x 10 x 12 inches
36 x 11-3/4 x 12 inches
818 x 254 x 305mm
915 x 298 x 305mm
Weight (each):
32 lbs/14.5 kg
36 lbs/16.4 kg
SU Series OM 7/22/98 3:13 PM Page 4
Display