SP 5 (serv.man2) — JBL Audio User Guide / Operation Manual

Model
SP 5 (serv.man2)
Pages
8
Size
123.86 KB
Type
PDF
Document
User Guide / Operation Manual
Brand
Device
Audio
File
sp-5-sm2.pdf
Date

View JBL SP 5 (serv.man2) User Guide / Operation Manual online

SP5, SP6, SP6C, SP6CS,
SP8, SP8C
SOUNDPOINT
SERIES
OWNER’S GUIDE
®
ENGLISH
2
INCLUDED
Template/paint
shield.
Remove paint
shield (inner 
rectangle) at per-
foration.
One pair of speakers with
grilles.
Template/paint
shield.
Remove paint
shield (inner 
circle) at 
perforation.
One pair of speakers with
grilles (SP6C and SP8C).
Model SP6CS includes only
one loudspeaker, since it is
capable of reproducing two
channels of audio.
THANK YOU FOR CHOOSING JBL
40
0
– 60
0
WALL
FRONT SPEAKERS
SPEAKER PLACEMENT
SP5, SP6, SP8
SP6C, SP6CS, SP8C
For more than 50 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
monitoring the recordings you
play in your home, car or office.
We’re confident that the 
JBL loudspeakers you have
chosen will provide every note
of enjoyment that you expected
– and that when you think
about purchasing additional
audio equipment for your home,
car or office, you will once
again choose JBL. 
Please take a moment to
register your product on our
Web site at www.jbl.com. It
enables us to keep you posted
on our latest advancements,
and helps us to better under-
stand our customers and build
products that meet their needs
and expectations.
JBL Consumer Products
ENGLISH
3
WALL
WALL
5 – 6 ft.
WALL
WALL
MODELS SP5, SP6, SP8 AS REAR SPEAKERS
MODELS SP6C, SP6CS, SP8C IN CEILING
Proper placement of the
speakers is an important step in
obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of the loud-
speakers. Use these placement
recommendations as a guide.
Slight variations will not dimin-
ish your listening pleasure.
The front speakers should be
placed the same distance from
each other as they are from the
listening position. They should
be placed at about the same
height from the floor as the 
listener’s ears will be, with 
the tweeters aimed toward the
listener at ear-level height.
In a home theater configura-
tion, the two surround speakers
should be placed slightly be-
hind the listening position and
ideally should face each other
and be at a level higher than
the listener’s ears. If that is not
possible, they may be placed in
a wall (or in the ceiling) behind
the listening position, facing
forward. The surround speak-
ers should not call attention to
themselves. They should
provide a diffuse, ambient
sound accompanying the main
program material heard in the
front speakers. In Dolby* Digital
and DTS
®
systems, aim the
tweeters toward the listening
position at ear-level height.
MODEL SP6CS 
Model SP6CS has the capability
of playing two channels
through one loudspeaker,
thanks to its dual-tweeter/dual-
voice-coil construction. Since
the tweeters are close
together, in general they should
be aimed away from each other
for best coverage. 
For two-channel (stereo) appli-
cations, e.g., as a single
speaker in a remote room of a
distributed audio system, install
the SP6CS speaker centrally in
the ceiling for best stereo imag-
ing, swiveling the tweeters so
that one points toward the left
and the other toward the right
of the listening position, aimed
at ear-level height. 
The SP6CS may also be used to
play the left and right surround
channels in a 5.1-channel home
theater system, in which case it
should be mounted in the ceil-
ing slightly behind the listening
position, centered from left to
right and with the tweeters
pointing toward the left and
right of the listening position,
aimed at ear-level height. For
7.1-channel systems where it is
desired to use two SP6CS
speakers, one to play both the
left surround and surround
back channels and the other to
play both the right surround
and surround back channels,
mount each SP6CS speaker in
the ceiling, slightly behind the
listening position, one closer to
the left side of the room and the
other closer to the right side.
Aim the tweeters away from
each other, toward the front
and rear of the room. 
ENGLISH
4
Phillips #2 screwdriver
Measuring tape
Utility knife
Pencil
Carpenter’s level
Awl
TOOLS NEEDED
The SoundPoint Series in-wall
speakers were designed to be
easily installed. However, if you
are unsure of your ability to
properly install these loud-
speakers, please contact your
dealer or a qualified installer.
INSTALLATION
The wires for both speakers
should be the same length. If
one speaker is placed closer to
the amplifier than the other,
hide the excess wire behind the
wall. Speakers and electronics
terminals have corresponding
(+) and (–) terminals. Most
CONNECTION TIPS
WIRE LENGTH
RECOMMENDED SIZE
Up to 20 ft.
16 gauge
Up to 30 ft.
12 gauge
Greater than 30 ft.
10 gauge
Front or Rear Speaker Outputs
LEFT                        RIGHT
LEFT
RIGHT
manufacturers of speakers and
electronics, including JBL, use
red to denote the (+) terminal
and black for the (–) terminal. It
is important to connect both
speakers identically: (+) on the
speaker to (+) on the amplifier
and (–) on the speaker to (–) on
the amplifier. Wiring “out of
phase” results in thin sound,
weak bass and a poor stereo
image. With the advent of multi-
channel surround sound
systems, connecting all of the
speakers in your system with
the correct polarity remains
equally important in order to
preserve the proper ambience
and directionality of the
program material.
To use the push-type speaker
terminals, press the red (+) or
black (–) cap for the desired
terminal, insert the bare end of
the speaker wire into the hole
below the cap and release the
cap. Gently tug on the wire to
make sure that it is fully
inserted.
SPEAKER CONNECTIONS
For model SP6CS, the terminals for
both the left and right channels will
be on the same loudspeaker.
ENGLISH
Page of 8
Display

Download JBL SP 5 (serv.man2) User Guide / Operation Manual

Here you can view online or download JBL SP 5 (serv.man2) User Guide / Operation Manual in pdf. This User Guide / Operation Manual can help you recover, restore, fix, disassemble and repair JBL SP 5 (serv.man2) Audio. Information contained in JBL SP 5 (serv.man2) service manual (repair manual) typically includes:

  • Disassembly, troubleshooting, programming, maintenance, remote, adjustment, installation and setup instructions.
  • Schematics, wiring and block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Parts list (bill of materials).