DOWNLOAD JBL SCS 260 (serv.man3) Service Manual ↓ Size: 460.07 KB | Pages: 14 in PDF or view online for FREE

SCS260.5/230 and
SCS260.6/230

®

The SCS260.6 system is shown here.

1. Unpacking: Check the product
carefully. If it has been damaged in
transit, report the damage immedi-
ately by calling your dealer and/or the
shipping company that delivered it.
2. Connections: Whenever changing,
connecting or disconnecting signal or
power cables etc., always turn off all
equipment. This prevents transients
from entering the equipment and pre-
vents electrical energy from reaching
you. Keep all connections out of the
reach of children. Before moving the
unit, be certain to disconnect any
interconnection cords with other
components, and make certain that
you disconnect any powered units
from the AC outlet.
3. Read Instructions. All the safety
and operating instructions should be
read before the product is operated.
4. Retain Instructions. The safety and
operating instructions should be
retained for future reference.
5. Heed Warnings. All warnings on the
product and in the operating instruc-
tions should be adhered to.
6. Follow Instructions. All operating
and use instructions should be fol-
lowed.
7. Water and Moisture. The product
should not be used near water – for
example, near a bathtub, washbowl,
kitchen sink, laundry tub, in a wet
basement, or near a swimming pool,
and the like.
8. Accessories. To ensure proper
operation and to avoid the potential
for safety hazards, place the unit on a
firm and level surface. When placing
the unit on a shelf, be certain that the
shelf and any mounting hardware can
support the product’s weight. 

Do not place this pro-
duct on an unstable
cart, stand, tripod,
bracket, or table. The
product may fall,
causing serious

injury to a child or adult, and serious
damage to the product. Use only with
a cart, stand, tripod, bracket, or table
recommended by the manufacturer,
or sold with the product. Any mount-

ing of the product should follow the
manufacturer’s instructions, and
should use a mounting accessory
recommended by the manufacturer.
9. Wall or Ceiling Mounting. The
product should be mounted on a wall
or ceiling only when and as recom-
mended by the manufacturer.
10. Cleaning. Unplug this product
from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol
cleaners. Use a dry cloth for clean-
ing.
11. Attachments. Do not use attach-
ments not recommended by the prod-
uct manufacturer, as they may cause
hazards.
12. Replacement Parts. When
replacement parts are required, be
sure the service technician has used
replacement parts specified by the
manufacturer or that have the same
characteristics as the original part.
Unauthorized substitutions may result
in fire, electric shock or other haz-
ards.
13. Safety Check. Upon completion of
any service or repairs to this product,
ask the service technician to perform
safety checks to determine that the
product is in proper operating condi-
tion.
14. Feet/Spikes. When positioning, or
moving this product ensure that is
lifted rather than dragged across any
floor/mounting surface. This will
avoid any damage to the floor/-
mounting surface. Attention! Prod-
ucts and/or product feet constructed

of rubber or plastics may, in seldom
cases, react chemically and discolor
treated or non-treated wooden sur-
faces if positioned without 
protection.
15. Warranty: The following 
conditions may result in a void prod-
uct warranty:
a. the manufacturers serial number is

removed or forged.

b. if repairs and/or modifications

and/or other treatments/tunings
have been carried out by non-
authorized personnel or acces-
sories/supplements are attached,
which are not approved by manu-
facturer/importer.

16. Warranty: The following items are
not covered by the product 
warranty:
a. Damage caused by inappropriate

handling despite clear instructions
provided in the owners manual.

b. Damage to mechanical parts (such

as record-/playback heads, moving
rubber and plastic parts and fuses)
as well as results of normal wear
and tear.

c. Damage caused by external action

or influence.

d. Damage caused by missuse by

user.

e. Damage caused by excessive elec-

trical mains supply voltage or light-
ning strike.

f. Damage caused by fire, water or

smoke.

g. Damage known to buyer prior to

purchase.

h. Damage caused by professional

employment of home entertainment
products (e.g. for catering trade,
restaurants, public address or infi-
nite loop announcement use etc.)

17. If an outside antenna or cable 
system is connected to the product, 
be sure the antenna or cable system 
is grounded so as to provide some 
protection against voltage surges and
built-up static charges. Article 810 of
the National Electrical Code, ANSI/
NFPA 70, provides information with
regard to proper grounding of the
mast and supporting structure,
grounding of the lead-in wire to an

antenna discharge unit, size of
grounding conductors, location of
antenna-discharge unit, connection
to grounding electrodes, and require-
ments for the grounding electrode.
See Figure A.
18. An outside antenna system should
not be located in the vicinity of over-
head power lines or other electric
light or power circuits, or where it
can fall into such power lines or cir-
cuits. When installing an outside
antenna system, extreme care should
be taken to keep from touching such
power lines or circuits, as contact
with them might be fatal.
19. Specifications: All product
specifications/features are subject to
change without notification.

Passive Products:
20. Amplifiers: Amplifiers used to
drive these units must deliver a suffi-
cient output power. A lack of output
power may lead to amplifier-clipping,
which causes damage not covered by
guarantee.

Active (Powered) Products:
21. Ventilation. Slots and openings in
the cabinet are provided for ventila-
tion and to ensure reliable operation
of the product and to protect it from
overheating, and these openings
must not be blocked or covered. The
openings should never be blocked by
placing the product on a bed, sofa,
rug, or other similar surface. This
product should not be placed in a
built-in installation such as a book-
case or rack unless proper ventilation
is provided or the manufacturer’s
instructions have been adhered to.
Make certain that the proper space
(more than 10cm) is provided both
above and below the unit for ventila-
tion. If the amplifier will be installed in
a cabinet or other enclosed area,
make certain that there is sufficient
air movement within the cabinet, with
means provided for hot air to exit and
for cool air to be brought in.
Do not obstruct the ventilation slots
on the top of the unit or place objects
directly over them. Remember, power
amplifiers generate heat, and the
heatsink fins and ventilation slots that
form part of the cabinet are specially
designed to remove this heat. Placing
other electronic equipment near
these heat-dissipation systems may
possibly affect the long term reliabil-
ity of both your amplifier and the
objects placed above it. Do not place
CDs, record jackets, owner’s manuals
or other paper on top of or beneath
the unit or in between products con-
taining amplifiers in a stack. This will
block the air flow, causing degraded
performance and a possible fire haz-
ard.

22. Power Sources. This product
should be operated only from the type
of power source indicated on the
marking label. If you are not sure of
the type of power supply to your
home, consult your product dealer or
local power company. For products
intended to operate from battery
power, or other sources, refer to the
operating instructions.
23. Grounding or Polarization. This
product may be equipped with a polar-
ized alternating-current line plug (a
plug having one blade wider than the
other). This plug will fit into the power
outlet only one way. This is a safety
feature. If you are unable to insert the
plug fully into the outlet, try reversing
the plug. If the plug should still fail to
fit, contact your electrician to replace
your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
24. Power-Cord Protection. Power-
supply cords should be routed so that
they are not likely to be walked on or
pinched by items placed upon or
against them, paying particular atten-
tion to cords at plugs, convenience
receptacles, and the point where
they exit from the product. To avoid
safety hazards, use only the power
cord supplied with your unit. If a
replacement cord is used, make cer-
tain that it is of a similar gauge. We
do not recommend using extension
cords with this product. As with all
electrical devices, do not run power
cords under rugs or carpets or place
heavy objects on power cords. Dam-
aged power cords should be replaced
immediately, by a qualified service
technician, with cords meeting fac-
tory specifications. When discon-
necting the power cord from an AC
outlet, always pull the plug; never pull
the cord.
25. Non-use Periods. The power cord
of the product should be unplugged
from the outlet when left unused for
long periods of time.
26. Lightning. For added protection
for this product during a lightning
storm, or when it is left unattended
and unused for long periods of time,
unplug it from the wall outlet and dis-
connect the antenna or cable system.
This will prevent damage to the prod-
uct due to lightning and power-line
surges.
27. Overloading. Do not overload wall
outlets, extension cords, or integral
convenience receptacles, as this can
result in a risk of fire or electric shock.

28. Damage Requiring Service. Do
not attempt to service this product
yourself, as opening or removing cov-
ers may expose you to dangerous
voltage or other hazards. Unplug this
product from the wall outlet and refer
servicing to qualified service person-
nel under the following conditions:
a. The power-supply cord or the plug

has been damaged; or

b. Objects have fallen, or liquid has

been spilled into, the product; or

c. The product has been exposed to

rain or water; or

d. The product does not operate nor-

mally when following the operating
instructions. Adjust only those con-
trols that are covered by the oper-
ating instructions, as an improper
adjustment of other 
controls may result in damage and
will often require extensive work by
a qualified technician to restore the
product to its normal operation; or

e. The product has been dropped, or

the enclosure damaged; or

f. The product does not appear to

operate normally or exhibits a
marked change in performance.

29. Object and Liquid Entry. Never
push objects of any kind into this prod-
uct through openings, as they may
touch dangerous voltage points or
short-out parts that could result in a
fire or electric shock. Never spill liquid
of any kind on the product. The appa-
ratus shall not be exposed to dripping
or splashing and no objects filled with
liquids, such as vases, shall be placed
on the apparatus.
30. Heat. The product should be situ-
ated away from heat sources such as
radiators, heat registers, stoves or
other products (including amplifiers)
that produce heat. Avoid installation
in extremely hot or cold locations, in
an area that is exposed to direct sun-
light or near heating equipment.
When positioning the product in its
final location, make certain that it has
adequate ventilation on all sides, as
well as on the top and bottom.

For more than 55 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
the recordings you play in
your home, car or office.

We’re confident that the JBL
system you have chosen will
provide every note of enjoy-

ment that you expected –
and that when you think
about purchasing additional
audio equipment for your
home, car or office, you will
once again choose JBL.

Please take a moment to
register your product on our
Web site at www.jbl.com. 
It enables us to keep you

posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that 
meet their needs and 
expectations.

JBL Consumer Products

Five (four in SCS260.5 system)
satellites for left, right and 
surrounds. Wall-mount brackets. 
Shelf stands. 

One center channel speaker with
shelf stand.

Powered subwoofer.

Three 6m (20') speaker cables for con-
nection to front, left, center and right
speakers, or to subwoofer when
speaker-level connections are used
(see page 10).

Two 4.6m (15') speaker cables for con-
nection from subwoofer to front speak-
ers, when speaker-level connections
are used (see page 10).

Three (two in SCS260.5 system) 12m
(40') speaker cables for connection
from receiver to rear satellites.

One 4.6m (15') RCA interconnect cable
for connection from receiver to sub-
woofer’s LFE input.