JBL SCS 200 (serv.man10) Service Manual ▷ View online
12
If there is no sound from any
of the speakers:
of the speakers:
• Check that receiver/ampli-
fier is on and a source is
playing.
playing.
• Check that the powered
subwoofer is plugged in,
and its Power switch
and its Power switch
å
is
switched on (“•” position).
• Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker:
from one speaker:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• In Dolby Digital or DTS
modes, make sure that the
receiver/processor is con-
figured so that the speaker
in question is enabled.
receiver/processor is con-
figured so that the speaker
in question is enabled.
• Turn off all electronics
and switch the speaker in
question with one of the
other speakers that is
working correctly. Turn
everything back on, and
determine whether the
question with one of the
other speakers that is
working correctly. Turn
everything back on, and
determine whether the
problem has followed the
speaker, or has remained in
the same channel. If the
problem is in the same
channel, the source of the
problem is most likely with
your receiver or amplifier,
and you should consult the
owner’s manual for that
product for further informa-
tion. If the problem has fol-
lowed the speaker, consult
your dealer for further
assistance or, if that is not
possible, visit
www.jbl.com.
speaker, or has remained in
the same channel. If the
problem is in the same
channel, the source of the
problem is most likely with
your receiver or amplifier,
and you should consult the
owner’s manual for that
product for further informa-
tion. If the problem has fol-
lowed the speaker, consult
your dealer for further
assistance or, if that is not
possible, visit
www.jbl.com.
If there is no sound from the
center speaker:
center speaker:
• Check all wires and con-
nections between receiver/
amplifier and speaker.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speaker.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• If your receiver/processor
is set in Dolby Pro Logic
mode, make sure the center
speaker is not in phantom
mode.
mode, make sure the center
speaker is not in phantom
mode.
• If your receiver/processor
is set in one of the Dolby
Digital or DTS modes, make
sure the receiver/processor
is configured so that the
center speaker is enabled.
Digital or DTS modes, make
sure the receiver/processor
is configured so that the
center speaker is enabled.
If the system plays at low
volumes but shuts off as
volume is increased:
volumes but shuts off as
volume is increased:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• If more than one pair of
main speakers is being
used, check the minimum
impedance requirements of
your receiver/amplifier.
used, check the minimum
impedance requirements of
your receiver/amplifier.
If there is low (or no) bass
output:
output:
• Make sure the connections
to the left and right
“Speaker Inputs” have the
correct polarity (+ and –).
“Speaker Inputs” have the
correct polarity (+ and –).
• Make sure the subwoofer
is plugged into an active
electrical outlet, and is
turned on (Power switch
electrical outlet, and is
turned on (Power switch
å
in the “•” position).
• In Dolby Digital or DTS
modes, make sure your
receiver/processor is con-
figured so that the sub-
woofer and LFE output are
enabled.
receiver/processor is con-
figured so that the sub-
woofer and LFE output are
enabled.
TROUBLESHOOTING
JBL
SCS200.5/230 Service Manual
Page 13 of 53
13
If there is no sound from
the surround speakers:
the surround speakers:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
amplifier and speakers.
Make sure all wires are
connected. Make sure
none of the speaker wires
are frayed, cut or punc-
tured, or touching each
other.
• Review proper operation of
your receiver/amplifier and
its surround sound fea-
tures.
its surround sound fea-
tures.
• Make sure the movie or
TV show you are watching
is recorded in a surround
sound mode. If it is not,
check to see whether your
receiver/amplifier has other
surround modes you may
use.
is recorded in a surround
sound mode. If it is not,
check to see whether your
receiver/amplifier has other
surround modes you may
use.
• In Dolby Digital or DTS
modes, make sure your
receiver/processor is con-
figured so that the surround
speakers are enabled.
When all five satellites are
in use, remember to config-
ure your receiver or proces-
sor for 6.1-channel opera-
tion.
receiver/processor is con-
figured so that the surround
speakers are enabled.
When all five satellites are
in use, remember to config-
ure your receiver or proces-
sor for 6.1-channel opera-
tion.
• Review the operation of
your DVD player and the
jacket of your DVD to make
sure that the DVD features
the desired Dolby Digital or
DTS mode, and that you
have properly selected that
mode using both the DVD
player’s menu and the DVD
disc’s menu.
jacket of your DVD to make
sure that the DVD features
the desired Dolby Digital or
DTS mode, and that you
have properly selected that
mode using both the DVD
player’s menu and the DVD
disc’s menu.
JBL
SCS200.5/230 Service Manual
Page 14 of 53
14
SCS200.5/230 AND
SCS200.6/230 SYSTEMS
SCS200.6/230 SYSTEMS
Frequency Response 35Hz – 20kHz (–6dB)
SATELLITES
Maximum Recommended Amplifier Power
100 Watts
Power Handling (Continuous/Peak)
50W/160W
Nominal Impedance 8 Ohms
Sensitivity 86dB @ 1 Watt/1 meter
Frequency Response 110Hz – 20kHz (–6dB)
Tweeter
One 13mm (1/2") titanium-laminate dome,
video-shielded
Midrange
One 75mm (3") driver, video-shielded
Dimensions (H x W x D) (not including shelf
stands) 184 x 102 x 89mm (7-1/4" x 4" x 3-1/2")
Weight 0.8kg (1.75 lb)
100 Watts
Power Handling (Continuous/Peak)
50W/160W
Nominal Impedance 8 Ohms
Sensitivity 86dB @ 1 Watt/1 meter
Frequency Response 110Hz – 20kHz (–6dB)
Tweeter
One 13mm (1/2") titanium-laminate dome,
video-shielded
Midrange
One 75mm (3") driver, video-shielded
Dimensions (H x W x D) (not including shelf
stands) 184 x 102 x 89mm (7-1/4" x 4" x 3-1/2")
Weight 0.8kg (1.75 lb)
CENTER
Maximum Recommended Amplifier Power
100 Watts
Power Handling (Continuous/Peak)
50W/200W
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 Watt/1 meter
Frequency Response 100Hz – 20kHz (–6dB)
Tweeter
One 13mm (1/2") titanium-laminate dome,
video-shielded
Midrange
Dual 75mm (3") drivers, video-shielded
Dimensions (H x W x D) (not including shelf
stand) 102 x 292 x 89mm (4" x 11-1/2" x 3-1/2")
Weight 1.4kg (3 lb)
100 Watts
Power Handling (Continuous/Peak)
50W/200W
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 Watt/1 meter
Frequency Response 100Hz – 20kHz (–6dB)
Tweeter
One 13mm (1/2") titanium-laminate dome,
video-shielded
Midrange
Dual 75mm (3") drivers, video-shielded
Dimensions (H x W x D) (not including shelf
stand) 102 x 292 x 89mm (4" x 11-1/2" x 3-1/2")
Weight 1.4kg (3 lb)
SUBWOOFER
Amplifier 100 Watts RMS
Frequency Response 35Hz – 160Hz (–6dB)
Woofer 200mm (8")
Enclosure Bass reflex
Dimensions (H x W x D) (including feet)
413 x 279 x 349mm (16-1/4" x 11" x 13-3/4")
Weight 12.7kg (28 lb)
Frequency Response 35Hz – 160Hz (–6dB)
Woofer 200mm (8")
Enclosure Bass reflex
Dimensions (H x W x D) (including feet)
413 x 279 x 349mm (16-1/4" x 11" x 13-3/4")
Weight 12.7kg (28 lb)
All features and specifications are subject to change
without notice.
without notice.
*Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
SPECIFICATIONS
DESIGN GOAL:
Bring the thrill of live performance and movie sound
to the home environment by calling on JBL’s professional engineering leadership.
SATELLITE TYPE:
Titanium-laminate-dome tweeter,
sealed enclosure
SUBWOOFER TYPE:
Bass-reflex enclosure
PORT DESIGN:
FreeFlow
™
flared
PROFESSIONAL REFERENCE:
Cinema Loudspeaker Series
OWNER’S GUIDE
P R O D U C T
L I N E :
MODEL:
SCS200.5/230 and SCS200.6/230
SURROUND CINEMA
SPEAKERS
SPEAKERS
© 2004 Harman International Industries, Incorporated
JBL is a registered trademark of
Harman International Industries, Incorporated.
Harman International Industries, Incorporated.
Part No.406-000-00955
PRO SOUND
COMES HOME
COMES HOME
™
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
www.jbl.com
Declaration of Conformity
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
72500 Chateau-du-Loir
France
declare in own responsibility that the products described in this
owner
owner
’
s manual are in compliance with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
EN 55013:2001
EN 55020:2002
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
EN 61000-6-1:2001
EN 55013:2001
EN 55020:2002
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
Gary Mardell
Harman Consumer International
Chateau-du-Loir, France 1/04
JBL
SCS200.5/230 Service Manual
Page 15 of 53
JBL
SCS200.5/230 Service Manual
Page 16 of 53
Click on the first or last page to see other SCS 200 (serv.man10) service manuals if exist.