DOWNLOAD JBL SCS 120 Sub Service Manual ↓ Size: 3.36 MB | Pages: 16 in PDF or view online for FREE

Model
SCS 120 Sub
Pages
16
Size
3.36 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
scs-120-sub.pdf
Date

JBL SCS 120 Sub Service Manual ▷ View online

SERVICE MANUAL
SERVICE MANUAL
Powered Subwoofer
JBL Consumer Products Inc.
80 Crossways Park West
Woodbury, N.Y. 11797
1-800-336-4JBL in the USA
A Harman International Company
Part No.: 1112-JBLBASS20
BASS20
1
Powered Subwoofer
BASS20
TABLE OF CONTENTS
Specifications .................................................................1
Features..........................................................................1
Powered Sub Test Setup...............................................2
Test Procedure...............................................................3
Important Service Note ..................................................4
Block Diagram ................................................................5
Amplifier Exploded View ................................................6
Cabinet Assembly Exploded View .................................7
Parts Lists.......................................................................8
Packaging View............................................................10
Printed Circuit Boards .................................................11
Integrated Circuit Diagram ...........................................13
Schematic Diagrams ...................................................14
SPECIFICATIONS
Amplifier Power (RMS)
.
.
.
.
.
.
.
150 Watts
Low Frequency Woofer (2) .
.
.
.
.
.
8 1/2"
Design.
.
.
.
.
.
.
.
.
.
.
.
.
Bass reflex enclosure, Grey or White
Inputs .
.
.
.
.
.
.
.
.
.
.
.
.
Line Level and Speaker Level
Outputs
.
.
.
.
.
.
.
.
.
.
.
.
Full Range Speaker
Crossover Frequency .
.
.
.
.
.
.
.
120Hz
Frequency Response .
.
.
.
.
.
.
.
40Hz - 120Hz (+/-3dB)
External Dimensions (Inches)
Height .
.
.
.
.
.
.
.
.
.
.
.
.
17-3/4"
Width .
.
.
.
.
.
.
.
.
.
.
.
.
10"
Depth .
.
.
.
.
.
.
.
.
.
.
.
.
24"
External Dimensions (mms)
Height .
.
.
.
.
.
.
.
.
.
.
.
.
451
Width .
.
.
.
.
.
.
.
.
.
.
.
.
254
Depth .
.
.
.
.
.
.
.
.
.
.
.
.
610
Weight.
.
.
.
.
.
.
.
.
.
.
.
.
42lbs (19.1kg)
FEATURES
n
The Bass20 powered subwoofer is part of the SCS120 or
MUSIC 20 System.
n
150 watt output.
n
Variable level control.
n
Line level or Speaker level inputs, outputs for full range
satellite speakers.
n
User friendly “auto on” circuit. Signal sensing
automatically turns the subwoofer on so you don't have
to; the subwoofer is meant to be left “on” without
continual use of the power switch.
2
Powered Subwoofer
BASS20
BASS 20 POWERED SUB WOOFER TEST SETUP
JBL continually strives to improve its products. New materials, production methods and design refinements are introduced into
existing models without notice as a routine expression of our design philosophy. For this reason, Bass Series loudspeakers
may differ in some respect from their published specifications and descriptions, but will always equal or exceed the original
specifications unless otherwise stated.
3
Powered Subwoofer
BASS20
TEST PROCEDURE
Equipment Needed:
n
Function generator/signal generator/sweep generator
n
Integrated Amplifier
n
Multimeter
n
Cables - Line level (RCA) and Speaker cables
UUT = Unit Under Test
General Function
1.
Connect both left and right line level inputs (RCA) to signal generator and UUT. Use Y-cable if necessary
from mono source.
2.
Turn on generator and adjust to 100mV, 50 Hz.
3.
Plug in UUT; red LEDshould be ON. Turn power switch to the ON or AUTO position and turn LEVEL control
full clockwise.
4.
Green LEDshould light, immediate bass response should be heard and felt from port tube openings.
5.
Turn off generator, turn unit to OFF, disconnect RCA cables.
6.
Connect two pairs of speaker cables to high level input terminal on UUT. Cables should be connected to an
integrated amplifier fed by the signal generator. Observe polarity of speaker cables.
7.
Turn on generator and adjust so that speaker level output is 2.5V, 50 Hz.
8.
Turn power switch to the ON or AUTO position and turn LEVEL control full clockwise.
9.
Green LEDshould light, immediate bass response should be heard and felt from port tube opening.
Sweep Function
1.
Follow steps 1-4 above, using a sweep generator as a signal source.
2.
Sweep generator from 20Hz to 300Hz. Listen to the cabinet and drivers for any rattles, clicks, buzzes or any
other noises. If any noises are heard, remove driver and test.
Driver Function
1.
Remove one or both drivers from cabinet; remove + and - wire clips.
2.
Check DC resistance of driver; it should be 4.2 ohms.
3.
Connect a pair of speaker cables to driver terminals. Cables should be connected to an integrated amplifier fed
by a signal generator. Turn on generator and adjust so that speaker level output is 5.0V.
4.
Sweep generator from 20Hz to 1kHz. Listen to driver for any rubbing, buzzing or other unusual noises.
SERVICE NOTE (120v Version only)
Even though the Bass20 seems to have an on/off power switch, in fact the switch does not
switch the main power off to the amp assembly, even in the OFF position. All AC and DC
voltages within the amplifier are still active, so for safety concerns the AC power cord should
be unplugged before any servicing begins.
Page of 16
Display

JBL SCS 120 Sub Service Manual ▷ Download

  • DOWNLOAD JBL SCS 120 Sub Service Manual ↓ Size: 3.36 MB | Pages: 16 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the JBL SCS 120 Sub in PDF for free, which will help you to disassemble, recover, fix and repair JBL SCS 120 Sub Audio. Information contained in JBL SCS 120 Sub Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.