JBL SB 200 (serv.man3) EMC - CB Certificate ▷ View online
Test Report issued under the responsibility of:
TEST REPORT
IEC 60065
Audio, video and similar electronic apparatus - Safety requirements
Report Number. ..............................:
350-120155AX
Date of issue ...................................:
2012-09-04
Total number of pages...................:
70 pages
Applicant’s name............................: Harman International Industries, Inc.
Address ...........................................: 8500 Balboa Blvd, Northridge, CA 91329, United States of America
Test specification:
Standard ..........................................: IEC 60065: 2001 (Seventh Edition) + A1: 2005 + A2: 2010
(including tropical condition: clause 7.1, 10.2, 10.3, 11)
EN 60065: 2002 (Seventh Edition) + A1: 2006 + A11: 2008 + A2:
2010 + A12: 2011
EN 60065: 2002 (Seventh Edition) + A1: 2006 + A11: 2008 + A2:
2010 + A12: 2011
Test procedure................................: CB Scheme
Non-standard test method.............: N/A
Test Report Form No......................: IEC60065K
Test Report Form(s) Originator.....: Intertek Semko AB
Master TRF ......................................: Dated 2010-10
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from
the reader's interpretation of the reproduced material due to its placement and context.
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from
the reader's interpretation of the reproduced material due to its placement and context.
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the CB
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and
appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
Test item description .....................: Soundbar
Trade Mark ......................................:
Manufacturer...................................: Harman International Industries, Inc.
Model/Type reference ....................: CINEMA SB200, CINEMA STV200
Ratings ............................................: 100-240V~, 50/60Hz. 60W, Class II
Page 2 of 70
Report No.: 350-120155AX
TRF No. IEC60065K
Testing procedure and testing location:
CB
Testing
Laboratory:
Audix Technology (Shanghai) Co., Ltd.
Testing location/ address ........................:
3-4F 34 Bldg. 680 Guiping Rd., Caohejing Hi-Tech Park
Shanghai CHINA
Shanghai CHINA
Tested by (name + signature) ....... : Mark Han
Approved by (name + signature).. : Kuma Kao
Associated CB Laboratory:
Testing location/ address ........................:
Tested by (name + signature) ....... :
Approved by (name + signature).. :
Testing procedure: TMP
Testing location/ address ........................:
Tested by (name + signature) ....... :
Approved by (name + signature).. :
Testing procedure: WMT
Testing location/ address ........................:
Tested by (name + signature) ....... :
Witnessed by (name + signature). :
Approved by (name + signature).. :
Testing procedure: SMT
Testing location/ address ........................:
Tested by (name + signature) ....... :
Approved by (name + signature).. :
Supervised by (name + signature) :
Testing procedure: RMT
Testing location/ address ........................:
Tested by (name + signature) ....... :
Approved by (name + signature).. :
Supervised by (name + signature) :
Page 3 of 70
Report No.: 350-120155AX
TRF No. IEC60065K
List of Attachments (including a total number of pages in each attachment):
Manufacturer’s Declaration: 1 sheet
Photograph: 7 sheet(s) / 14 Fig(s).
Summary of testing:
1. The sample tested complies with the requirements of the test specification.
2. Model CINEMA STV200 is identical to model CINEMA SB200 except for model designation and market.
1. The sample tested complies with the requirements of the test specification.
2. Model CINEMA STV200 is identical to model CINEMA SB200 except for model designation and market.
Unless otherwise specified, all tests were performed on model CINEMA SB200.
3. The subject model as above is a Cinema Powered Soundbar Speaker Based on applicant’s testing
instruction and all requirements were tested on an open bench.
4. Power Transformers (T5311-1) were made by these factories, Jingquanli / Sunshine / Haixinxing, there
are the same winding specifications and electrical characteristics. Accordingly all tests were conducted
on as follows.
on as follows.
Haixinxing / BCK-03EC28.
5. Following symbols and abbreviations are used in this test report.
S/C= Short-Circuit
O/C= Open-Circuit
O/L= Overload
MT= Mains Transformer TW= Transformer Winding (measured by resistance method)
TC= Transformer Core
TC= Transformer Core
TP= Thermal Protector
NH= No Hazard Occurred NFR= No Further Results existed
TRSR = Test Repeated Similar Results as just before the test
NCH= No component Heated higher than Heating under normal operating condition, CL. 7.
NCD= No component Damaged.
CD (X)= Component Damaged. (X: damage component ID indicated)
CH (X)= Component Heated (X: heated component ID indicated) and thermally stabilized.
+ = total overheated areas of the printed board(s) are not larger than 2 cm².
LC= Lead Connection on the printed board
PCB= Printed Circuit Board
IE= Inside of Enclosure
TRSR = Test Repeated Similar Results as just before the test
NCH= No component Heated higher than Heating under normal operating condition, CL. 7.
NCD= No component Damaged.
CD (X)= Component Damaged. (X: damage component ID indicated)
CH (X)= Component Heated (X: heated component ID indicated) and thermally stabilized.
+ = total overheated areas of the printed board(s) are not larger than 2 cm².
LC= Lead Connection on the printed board
PCB= Printed Circuit Board
IE= Inside of Enclosure
OE= Outside of Enclosure
KH= Knob, Handle
PW= Primary Wire
IB=Insulating Barrier
E = Emitter
C = Collector
B = Base
* = Determined by the method specified in Note f to Table 3.
Tests performed (name of test and test clause):
Full tests.
Testing location:
See CB Testing Laboratory information.
See CB Testing Laboratory information.
Summary of compliance with National Differences
List of countries addressed:
EN, AU, NZ, KR, MY, UA, JP
SG, KE, BR, RU (no national differences in CB-Bulletin)
Page 4 of 70
Report No.: 350-120155AX
TRF No. IEC60065K
Copy of marking plate:
The artwork below may be only a draft. The use of certification marks on a product must be
authorized by the respective NCBs that own these marks.
authorized by the respective NCBs that own these marks.
Test item particulars .................................................. :
See general product information for the details.
Classification of installation and use ...................... :
Table-Top or Wall-Mounting, Not portable, Not
intend to use for floor standing.
intend to use for floor standing.
Supply Connection .................................................... :
Detachable Power Supply Cord
Possible test case verdicts:
- test case does not apply to the test object .......... :
N/A (Not Applicable)
- test object does meet the requirement ................. :
Pass
- test object does not meet the requirement .......... :
Fail
Testing:
Date of receipt of test item........................................ :
2012-07-09
Date (s) of performance of tests .............................. :
2012-07-09 to 2012-07-25
