JBL S 2600 User Manual / Operation Manual ▷ View online
6
TYPICAL SYSTEM
PERFORMANCE:
PERFORMANCE:
Figure 5 shows the on-axis sine
wave response of the S2600 sys-
tem taken in a 2
tem taken in a 2
π
environment
(adjacent to one wall), with contri-
butions from low and high frequen-
cy elements indicated separately.
The dashed line represents the
effect of 4
butions from low and high frequen-
cy elements indicated separately.
The dashed line represents the
effect of 4
π
(free space) loading.
The overall response does not vary
by more than ±2.5dB from 75Hz to
13kHz. The impedance of the sys-
tem is also shown in this graph.
by more than ±2.5dB from 75Hz to
13kHz. The impedance of the sys-
tem is also shown in this graph.
20
100
1K
70dB
10
Ω
31.6
Ω
3.16
Ω
80dB
90dB
100dB
10K
20k
log frequency – Hz
GROUND PLANE
4
π
2
π
sound pressure level
IMPEDANCE (OHMS)
ANECHOIC
4
π
20
100
1K
60dB
70dB
80dB
90dB
100dB
10K
20k
sound pressure level
2nd Harmonic (+20dB)
3rd Harmonic (+20dB)
Figure 5. S2600 Frequency Response & Impedence
Figure 6. S2600 2nd & 3rd Harmonic Distortion
Figure 6 shows second and
third harmonic distortion for the
S2600 system at a level of 96dB
SPL measured at a distance of
1 meter. The distortion curves have
been raised 20dB for ease in read-
ing. Under these measurement
considerations the low frequency
distortion remains well under 1%.
High frequency distortion is no
greater than 2% out to 8.5kHz.
S2600 system at a level of 96dB
SPL measured at a distance of
1 meter. The distortion curves have
been raised 20dB for ease in read-
ing. Under these measurement
considerations the low frequency
distortion remains well under 1%.
High frequency distortion is no
greater than 2% out to 8.5kHz.
S2600/S3100 LOUDSPEAKER SYSTEMS
7
PERFORMANCE WITH VIDEO:
Both the S2600 and S3100
systems can be used in typical
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
ADDITIONAL TECHNICAL
INFORMATION:
INFORMATION:
In addition to their attribute of
superb imaging, the S2600 and
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
The high frequency driver has a
titanium diaphragm for added resis-
tance to the effects of fatigue and
for extended high frequency
response.
tance to the effects of fatigue and
for extended high frequency
response.
The enclosure is made of
rugged 25mm (1in) particle board,
liberally braced for high damping.
liberally braced for high damping.
WARRANTY AND SERVICE:
JBL continually strives to
improve its products. New materi-
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
S2600/S3100 LOUDSPEAKER SYSTEMS
7
PERFORMANCE WITH VIDEO:
Both the S2600 and S3100
systems can be used in typical
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
ADDITIONAL TECHNICAL
INFORMATION:
INFORMATION:
In addition to their attribute of
superb imaging, the S2600 and
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
The high frequency driver has a
titanium diaphragm for added resis-
tance to the effects of fatigue and
for extended high frequency
response.
tance to the effects of fatigue and
for extended high frequency
response.
The enclosure is made of
rugged 25mm (1in) particle board,
liberally braced for high damping.
liberally braced for high damping.
WARRANTY AND SERVICE:
JBL continually strives to
improve its products. New materi-
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
S2600/S3100 LOUDSPEAKER SYSTEMS
7
PERFORMANCE WITH VIDEO:
Both the S2600 and S3100
systems can be used in typical
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
video installations. Due to the ori-
entation of the compression dri-
vers, with their magnets located at
the outside rear of each enclosure,
video systems may be placed any-
where between the stereo pair of
loudspeakers, with residual mag-
netic fields well within standards
for video applications.
ADDITIONAL TECHNICAL
INFORMATION:
INFORMATION:
In addition to their attribute of
superb imaging, the S2600 and
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
S3100 systems are designed and
built very much in the JBL tradition
of fine workmanship and the use of
the best materials. Both LF trans-
ducers are new designs that incor-
porate Aquaplas® damping materi-
al on both cones and surrounds for
smoothest response. Both trans-
ducers have cast aluminum frames
for extra strength, and magnetic
structures have been linearized
through a series of on-going JBL
improvements in this area.
The high frequency driver has a
titanium diaphragm for added resis-
tance to the effects of fatigue and
for extended high frequency
response.
tance to the effects of fatigue and
for extended high frequency
response.
The enclosure is made of
rugged 25mm (1in) particle board,
liberally braced for high damping.
liberally braced for high damping.
WARRANTY AND SERVICE:
JBL continually strives to
improve its products. New materi-
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
als, production methods and
design refinements are introduced
into existing models without notice
as a routine expression of our
design philosophy. For this reason,
JBL S Series Loudspeakers may
differ in some respect from their
published specifications and
descriptions, but will always equal
or exceed the original specifica-
tions unless otherwise stated.
Display
