JBL ON TIME MICRO (serv.man7) EMC - CB Certificate ▷ View online
Page 77 of 106 Report No.: NTEK-2011NT1009314E
Test: Immunity Conducted Voltages S2a <700-0105-005>
Test Mode: Combi Device - Stereo Monitor: Speaker
Operating Mode: FM S/N: 56.8 dB
Frequency: 98.000000 MHz AF Level: 45.1 mW
Interf. Signal: AUX,
Test Mode: Combi Device - Stereo Monitor: Speaker
Operating Mode: FM S/N: 56.8 dB
Frequency: 98.000000 MHz AF Level: 45.1 mW
Interf. Signal: AUX,
70
80
90
100
110
120
130
140
150
Level (E.M.F.) [dB
礦
]
150k300k500k
1M
2M
3M
5M 7M 10M
20M 30M 50M
150M
Frequency [Hz]
Page 78 of 106 Report No.: NTEK-2011NT1009314E
4.6 IMMUNITY TO RF VOLTAGES (COMMON MODE) AT ANTENNA TERMINATE (S2B)
4.6.1 TEST LIMIT
4.6.2 TEST PROCEDURE
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.4 of EN55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.4 of EN55020.
4.6.3 TEST SETUP
For the actual test configuration, please refer to the related Item –EUT Test Photos.
Page 79 of 106 Report No.: NTEK-2011NT1009314E
4.6.4
TEST RESULTS
EUT：
AM/FM radio & speaker dock
for ipod/iphone
for ipod/iphone
Model Name ：
Jbl on time™ micro
Temperature：
25 ℃
Relative Humidity： 60%
Pressure：
1010 hPa
Test Date :
2011-10-17
Test Mode ：
FM
Test Power ：
DC 12V From Adapter AC 230V/50Hz
Test: Immunity Conducted Currents S2b <700-0105-005>
Test Mode: Combi Device - Stereo Monitor: Speaker
Operating Mode: FM S/N: 48.9 dB
Frequency: 98.000000 MHz AF Level: 49.5 mW
Interf. Signal: Antenna,
Test Mode: Combi Device - Stereo Monitor: Speaker
Operating Mode: FM S/N: 48.9 dB
Frequency: 98.000000 MHz AF Level: 49.5 mW
Interf. Signal: Antenna,
70
80
90
100
110
120
130
140
150
Level (E.M.F.) [dB
礦
]
26M
27M
28M
29M
30M
Frequency [Hz]
Page 80 of 106 Report No.: NTEK-2011NT1009314E
4.7 IMMUNITY REQUIREMENTS FOR THE ENCLOSURE PORT (S3)
4.7.1 TEST LIMIT
4.7.2 TEST PROCEDURE
Measurement was performed in shielded room.
Instruments used were following CISPR 16-1 and EN 55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.4 of EN55020.
Measurement methods and operation conditions of EUT was according to clause 5.1, 5.2
and 5.4 of EN55020.
Click on the first or last page to see other ON TIME MICRO (serv.man7) service manuals if exist.