JBL HTPS 300 User Manual / Operation Manual ▷ View online
HT PS300
(230V)
Powered
Subwoofer
Subwoofer
simple
set-up guide
thank you
for choosing JBL. For over 50 years, JBL has
been involved in every aspect of musical and film recording and
reproduction, from live performances to monitoring the recordings
you play in your home, car, or office.
We’re confident that the
JBL loudspeaker
you have
chosen will provide every note of enjoyment that you expected –
and that when you think about purchasing additional audio
equipment for your home, car, or office, you will once again
choose JBL.
Please take a moment to complete the enclosed profile card. It
enables us to keep you posted on our latest advancements, and
helps us to better understand our customers and build products
that meet your needs and expectations.
JBL Consumer Products
HT PS 300 (230V) OM 7/22/98 3:07 PM Page 1
one.
Speaker Placement
The ideal placement for the
HT PS300 is along the wall
where the front speakers are
installed. Because of the
side firing design of the sub-
woofer, it is recommended
that the woofers be placed in
a corner at least six inches
away from the side walls.
Since the HT PS300 is video-
shielded, it may be placed in
proximity to a television
monitor, if desired.
HT PS300 is along the wall
where the front speakers are
installed. Because of the
side firing design of the sub-
woofer, it is recommended
that the woofers be placed in
a corner at least six inches
away from the side walls.
Since the HT PS300 is video-
shielded, it may be placed in
proximity to a television
monitor, if desired.
≥
6"
≥
6"
Front view
Top view
HT PS 300 (230V) OM 7/22/98 3:07 PM Page 2
two.
Hookup
Line-Level Inputs
THX® Mode:
If your surround processor/
receiver is THX certified or
contains a subwoofer
crossover.
If your surround processor/
receiver is THX certified or
contains a subwoofer
crossover.
High Level
Inputs
High Level
Outputs
L R
L R
Phase
0
°
180
°
On
Output
Level
Crossover
Frequency
Frequency
Stby
0 10
50Hz 120Hz
+ – – +
+ – – +
Line
THX
THX
Controls
Bypassed
Line Level
Input
Input Output
( )
Subwoofer
Out
Receiver/Processor
Note: When the THX/Normal
switch is set to “THX,” the
internal crossover and output
level control are bypassed.
switch is set to “THX,” the
internal crossover and output
level control are bypassed.
Subwoofer
Out
Sub 1
Receiver/Processor
Sub 2
THX
Controls
Bypassed
Input Output
( )
THX
Controls
Bypassed
Input Output
( )
To continue enjoying THX-
quality bass response in a
very large room, two or more
HT PS300 subwoofers may be
connected in series. For every
3000 cu. ft. of room volume,
it is recommended that you
use one HT PS300.
quality bass response in a
very large room, two or more
HT PS300 subwoofers may be
connected in series. For every
3000 cu. ft. of room volume,
it is recommended that you
use one HT PS300.
HT PS 300 (230V) OM 7/22/98 3:07 PM Page 3
Normal Mode:
If your surround processor/
receiver does not contain a
subwoofer crossover.
If your surround processor/
receiver does not contain a
subwoofer crossover.
High Level
Inputs
High Level
Outputs
L R
L R
Phase
0
°
180
°
On
Stby
0 10
50Hz 120Hz
+ – – +
+ – – +
Line
THX
THX
Controls
Bypassed
Line Level
Input
Input Output
( )
Subwoofer
Out
L R
Output
Level
Crossover
Frequency
Frequency
Receiver/Amplifier
High Level
If your receiver does not
have subwoofer outputs:
have subwoofer outputs:
High Level
Inputs
High Level
Outputs
L R
L R
Phase
0
°
180
°
On
Stby
0 10
50Hz 120Hz
+ – – +
+ – – +
+ – – +
+ –
Line
THX
THX
Controls
Bypassed
Line Level
Input
Input Output
( )
Left
Front Speaker
+ –
Right
Front Speaker
Front Speakers
Left Right
Output
Level
Crossover
Frequency
Frequency
Receiver/Amplifier
Note: Some receivers/
processors have a mono
subwoofer output. In this
case, you must use a “Y”-
connector (not included) in
order to maximize the sub-
woofer’s performance.
processors have a mono
subwoofer output. In this
case, you must use a “Y”-
connector (not included) in
order to maximize the sub-
woofer’s performance.
HT PS 300 (230V) OM 7/22/98 3:07 PM Page 4
Display