JBL HT 1D (serv.man3) User Manual / Operation Manual ▷ View online
If the sound seems to come
from instead of between
the speakers, check the
following:
the speakers, check the
following:
• Make sure the polarity
(+ and –) of the speaker
inputs are connected properly.
• The speakers are too far
from the back or side walls or
are too far apart. Experiment
with the speaker placement.
(+ and –) of the speaker
inputs are connected properly.
• The speakers are too far
from the back or side walls or
are too far apart. Experiment
with the speaker placement.
If there is very low or no
output from any of the
speakers, check the
following:
output from any of the
speakers, check the
following:
• Receiver or processor/
amplifier is on and a source is
playing.
• Review proper operation of
your receiver/processor.
amplifier is on and a source is
playing.
• Review proper operation of
your receiver/processor.
If there is very low or no
output from one or more
speakers, check the
following:
output from one or more
speakers, check the
following:
• Check the “Balance” control
on your receiver/processor.
• Check the surround level on
your receiver/processor.
• Check all wires and connec-
tions between the receiver/
amplifier and the speakers.
Make sure all wires are con-
nected and that none of the
speaker wires are frayed, cut,
or punctured.
• Review proper operation of
your receiver/processor.
on your receiver/processor.
• Check the surround level on
your receiver/processor.
• Check all wires and connec-
tions between the receiver/
amplifier and the speakers.
Make sure all wires are con-
nected and that none of the
speaker wires are frayed, cut,
or punctured.
• Review proper operation of
your receiver/processor.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and con-
nections between receiver/
amplifier and the speakers.
Make sure all wires are con-
nected and that none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
nections between receiver/
amplifier and the speakers.
Make sure all wires are con-
nected and that none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
Troubleshooting
HT1F, HT1D OM 7/22/98 2:39 PM Page 5
HT1F
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
HT1D
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
Specifications
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 8/96
©
1996 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
Part No. HTOM
Occasional refinements may be
made to existing products
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
*Undistorted continuous power
per channel.
A Harman International Company
C
E
L E
B R A T I
N
G
5
0
Y E A
R
S
HT1F, HT1D OM 7/22/98 2:39 PM Page 6
HT1F
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
HT1D
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
Specifications
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 8/96
©
1996 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
Part No. HTOM
Occasional refinements may be
made to existing products
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
*Undistorted continuous power
per channel.
A Harman International Company
C
E
L E
B R A T I
N
G
5
0
Y E A
R
S
HT1F, HT1D OM 7/22/98 2:39 PM Page 6
HT1F
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
70Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
8 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
17-1/2 x 10 x 8-1/2 inches
445 x 254 x 216mm
Weight
21 lbs/9.5 kg
HT1D
High Frequency Drivers
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
2 x 1" pure titanium
Midrange Drivers
2 x 5" high polymer laminate
Frequency Response
100Hz – 20kHz
Recommended Amplifier
Power*
10 – 130 watts
Sensitivity
87dB @ 1 watt/1 meter
Impedance
6 ohms
Crossover Frequency
2800Hz
Dimensions (HxWxD)
13-7/8 x 9-1/4 x 7-3/4 inches
352 x 235 x 197mm
Weight
15 lbs/6.8 kg
Specifications
Declaration of Conformity
Kongevejen 194B
DK-3460 Birkerød
DENMARK
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards:
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 8/96
©
1996 JBL, Incorporated.
JBL is a registered trademark of JBL, Incorporated.
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
THX is a registered trademark of Lucasfilm Ltd.
Manufactured under license of Lucasfilm Ltd.
Printed in USA 10/96
Part No. HTOM
Occasional refinements may be
made to existing products
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
without notice, but will always
meet or exceed original
specifications unless otherwise
stated.
*Undistorted continuous power
per channel.
A Harman International Company
C
E
L E
B R A T I
N
G
5
0
Y E A
R
S
HT1F, HT1D OM 7/22/98 2:39 PM Page 6
Display
