DOWNLOAD JBL HP 6B (serv.man2) Service Manual ↓ Size: 94.68 KB | Pages: 4 in PDF or view online for FREE

Model
HP 6B (serv.man2)
Pages
4 Few pages! See other manuals at the bottom of the first or last page.
Size
94.68 KB
Type
PDF
Document
User Manual / Operation Manual
Brand
Device
Audio
File
hp-6b-sm2.pdf
Date

JBL HP 6B (serv.man2) User Manual / Operation Manual ▷ View online

HP6B, HP8B,
HP82B,
HP88F
simple
set-up guide
thank you
for choosing JBL. For over 50 years, JBL has 
been involved in every aspect of musical and film recording and
reproduction, from live performances to monitoring the recordings
you play in your home, car, or office.
We’re confident that the 
JBL loudspeakers
you have 
chosen will provide every note of enjoyment that you expected –
and that when you think about purchasing additional audio 
equipment for your home, car, or office, you will once again
choose JBL.
Please take a moment to complete the enclosed profile card. It
enables us to keep you posted on our latest advancements, and 
helps us to better understand our customers and build products 
that meet your needs and expectations.
JBL Consumer Products
HP Series OM  7/22/98 12:43 PM  Page 1
one.
Speaker Placement
Magnet
Magnet
HP6B, HP8B, HP82B
HP88F
Tweeter Grille Installation (optional)
HP Series OM  7/22/98 12:43 PM  Page 2
Troubleshooting
two.
Speaker Connections
Connection Tips
–   +
–   +
–             +
–             +
Speaker Outputs
RIGHT                        LEFT
RIGHT
LEFT
Speakers and electronics terminals have corresponding (+) and
(–) terminals. It is important to connect both speakers identi-
cally: (+) on the speaker to (+) on the amplifier and (–) on the
speaker to (–) on the amplifier. Wiring “out of phase” results in
thin sound, weak bass and a poor stereo image.
If there is no sound from
any of the speakers, check
the following:
• Receiver/amplifier is on and
a source is playing.
• Review proper operation of
your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
• Check the “Balance” control
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are 
connected. Make sure none of
the speaker wires are frayed,
cut, or punctured.
If the system plays at low
volumes but shuts off as
volume is increased, check
the following:
• Check all wires and connec-
tions between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut,
or punctured.
• If more than one pair of
main speakers is being used,
check the minimum imped-
ance requirements of your
receiver/amplifier.
If there is low bass output,
check the following:
• Make sure the polarity 
(+ and –) of the left and 
right “Speaker Inputs” are
connected properly.
HP Series OM  7/22/98 12:43 PM  Page 3
Declaration of Conformity
Kongevejen 194B 
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the products described
in this owner’s manual are in compliance with technical
standards: 
EN 50 081-1/1992
EN 50 082-1/3.1995
Steen Michaelsen
Birkerød. DENMARK. 7/96
C
E
L E
B R A T I N
G
5
0
Y E A
R
S
©
1996 JBL, Incorporated. JBL is a registered trademark 
of JBL, Incorporated.
Printed in USA 7/96  
Part No. 330990-001
Specifications
Occasional refinements may 
be made to existing products
without notice, but will
always meet or exceed origi-
nal speci-fications unless 
otherwise stated.
*The maximum recommended
amplifier power rating will
ensure proper system head-
room to allow for occasional
peaks. We do not recommend
sustained operation at these
maximum power levels.
SYSTEM
HP6B
HP82B
Frequency Response (–6dB):
57Hz – 22kHz
48Hz – 22kHz
Recommended Maximum
Power Handling*:
100 watts
150 watts
Sensitivity @ 1 watt/1 meter:
89dB
90dB
Normal Impedance:
8 ohms
8 ohms
Crossover Frequency:
2800Hz
3000Hz
Woofer:
6-1/2" cast frame
8" cast frame
Midrange:
N/A
N/A
Tweeter:
1" pure titanium
1" pure titanium
Finish:
black ash woodgrain vinyl
black ash woodgrain vinyl
Dimensions (HxWxD):
16-1/2 x 9-1/4 x 8-1/8 inches
19-7/8 x 11-1/2 x 9-1/8 inches
419 x 235 x 206mm
501 x 292 x 232mm
Weight (each):
15 lbs/6.8 kg
21-1/4 lbs/9.6 kg
SYSTEM
HP8B
HP88F
Frequency Response (–6dB):
46Hz – 22kHz
40Hz – 22kHz
Recommended Maximum
Power Handling*:
200 watts
250 watts
Sensitivity @ 1 watt/1 meter:
91dB
93dB
Normal Impedance:
8 ohms
8 ohms
Crossover Frequency:
850Hz, 3000Hz
850Hz, 3000Hz
Woofer:
8" cast frame
2 x 8" cast frame
Midrange:
5" cast frame
5" cast frame
Tweeter:
1" pure titanium
1" pure titanium
Finish:
black ash woodgrain vinyl
black ash woodgrain vinyl
Dimensions (HxWxD):
23-1/8 x 11-1/2 x 10 inches
35-1/4 x 11-1/2 x 12-1/2 inches
584 x 292 x 254mm
870 x 292 x 318mm
Weight (each):
27 lbs/12.25 kg
47 lbs/21.3 kg
A Harman International Company
HP Series OM  7/22/98 12:43 PM  Page 4
Display

JBL HP 6B (serv.man2) User Manual / Operation Manual ▷ Download

  • DOWNLOAD JBL HP 6B (serv.man2) Service Manual ↓ Size: 94.68 KB | Pages: 4 in PDF or view online for FREE
  • Here you can View online or download the User Manual / Operation Manual for the JBL HP 6B (serv.man2) in PDF for free, which will help you to disassemble, recover, fix and repair JBL HP 6B (serv.man2) Audio. Information contained in JBL HP 6B (serv.man2) User Manual / Operation Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.