JBL FM 8 User Manual / Operation Manual ▷ View online
Step One:
Remove the grille from the
speaker frame.
Remove the grille from the
speaker frame.
Step Two:
Determine the correct speaker
location.
Determine the correct speaker
location.
Template
Tape
Level
Step Three:
Determine the speaker-frame
location.
Determine the speaker-frame
location.
≥
1-1/2"
≥
1-1/2"
≥
1-1/2"
Step Four:
Cut the dry wall.
Cut the dry wall.
Step Five:
Place the mounting bracket on
the speaker frame using the
mounting guides (marked 3/8",
1/2", 5/8", and 3/4") corre-
sponding to the thickness of
the dry wall.
Place the mounting bracket on
the speaker frame using the
mounting guides (marked 3/8",
1/2", 5/8", and 3/4") corre-
sponding to the thickness of
the dry wall.
Kerf Line
Step Six:
Place the frame assembly in
the wall.
Place the frame assembly in
the wall.
Step Seven:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame.
Do not overtighten the baffle
screws.
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame.
Do not overtighten the baffle
screws.
Step Eight:
Replace the metal grille.
Replace the metal grille.
Existing Construction
FM Series Owner’s Manual 7/22/98 9:27 AM Page 5
New Construction
Step One:
Remove the grille from the
speaker frame.
Remove the grille from the
speaker frame.
Step Two:
Attach the proper mounting
bracket, marked and preset at
3/8", 1/2", 5/8", and 3/4" to the
speaker frame.
Attach the proper mounting
bracket, marked and preset at
3/8", 1/2", 5/8", and 3/4" to the
speaker frame.
Step Three:
Determine the correct speaker
location.
Determine the correct speaker
location.
≥
1-1/2"
≥
1-1/2"
≥
1-1/2"
Step Four:
Nail or screw the speaker frame
assembly to the wall studs and
route the wires through the
frame opening.
Nail or screw the speaker frame
assembly to the wall studs and
route the wires through the
frame opening.
Step Five:
Cut the drywall.
Cut the drywall.
Step Six:
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame. Do
not overtighten the baffle
screws.
Connect the speaker wires to
the baffle assembly and install
baffle assembly in frame. Do
not overtighten the baffle
screws.
After the Drywall is Installed
Step Seven:
Replace the metal grille.
Replace the metal grille.
FM Series Owner’s Manual 7/22/98 9:27 AM Page 6
FM8SUB
Step One:
Remove the grille from the
subwoofer frame.
Remove the grille from the
subwoofer frame.
Step Two:
Determine the correct
subwoofer location.
Determine the correct
subwoofer location.
≥
1-1/2"
≥
1-1/2"
≥
1-1/2"
Step Three
Cut the drywall.
Cut the drywall.
Step Four:
Loosen the eight phillips head
screws until the locking tabs
turn inward.
Loosen the eight phillips head
screws until the locking tabs
turn inward.
Step Five
Connect the speaker wires to
the baffle assembly.
Connect the speaker wires to
the baffle assembly.
Step Six:
Place the subwoofer in the wall.
Place the subwoofer in the wall.
Step Seven:
Screw down each of the eight
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
Screw down each of the eight
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
Step Eight
Replace the metal grille.
Replace the metal grille.
FM Series Owner’s Manual 7/22/98 9:27 AM Page 7
FM65CX
Step One:
Remove the grille from the
speaker frame.
Remove the grille from the
speaker frame.
Step Two:
Determine the correct speaker
location in the ceiling.
Determine the correct speaker
location in the ceiling.
≥
1-1/2"
≥
1-1/2"
Step Three:
Cut the drywall.
Cut the drywall.
Step Five:
Loosen the three phillips head
screws on the frame, until the
locking tabs turn inward.
Loosen the three phillips head
screws on the frame, until the
locking tabs turn inward.
Step Eight:
Connect the speaker wires to
the speaker.
Connect the speaker wires to
the speaker.
Step Six:
Place the frame assembly in
the wall.
Place the frame assembly in
the wall.
Step Seven:
Screw down each of the three
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
Screw down each of the three
phillips head screws. The tabs
will swivel into place and
secure the unit to the rear
surface of the drywall.
Step Ten:
Replace the metal grille.
Replace the metal grille.
Step Four:
Remove 4 phillips head screws
that attach speaker to frame.
Remove 4 phillips head screws
that attach speaker to frame.
Step Nine:
Reinstall speaker in frame,
using 4 phillips head screws.
Reinstall speaker in frame,
using 4 phillips head screws.
FM Series Owner’s Manual 7/22/98 9:27 AM Page 8
Click on the first or last page to see other FM 8 service manuals if exist.