DOWNLOAD JBL ESC 550 Source (serv.man16) Service Manual ↓ Size: 352.5 KB | Pages: 20 in PDF or view online for FREE

– 11 –

1. Push “Power” and/or “Open”
on The Source.

2. Insert CD.

3. Push “Play” on The Source or 
the remote control. 

(The door will close
automatically.)

Push “Back” or “Forward,” on
The Source or 

the remote control, until the
number of the desired track
appears on the display.

Push left arrow or right arrow on
The Source or 

the remote control.

Push “Pause” on The Source or

the remote control.
Push again to resume play.

Push “Stop” on The Source or 

the remote control.

– 12 –

Push “Random” on The Source.
The Source will automatically
delete each track it has played
from the “Random” operation.

Push “Power” or “AM/FM” on
The Source or the remote 
control.

Push “AM/FM” on The Source or 

the remote control.

Push “<<” or “>>” on The Source
or 

the remote control. To search
rapidly, hold down the “<<” or
“>>” button.

Push “Repeat” on The Source.

Note: If “Random” and
“Repeat” are both engaged the
CD player will randomly play the
disc, deleting all played tracks,
until the disc is 
finished. It will then randomly
play the disc again.

– 13 –

TM

– 14 –

The Source has a unique feature
that will automatically place up
to 32 stations in memory.
To activate this feature, push
and hold the “Auto” button for
one second.
The tuner will search the dial
and place the stations with a
strong signal into memory.

Push “Auto Tune” on The Source.

Then when you push “<<” or
“>>” on The Source or

the remote the tuner will
automatically advance to the
next station with a strong
signal.

Push “Stereo/Mono” on The
Source. This will play the
selected station without any
stereo separation, but there will
be much less background noise.

The “<<” or “>>” on The Source
or

the remote control will tune up
or down one frequency 
at a time.

1. Tune to the station that you
want to add into memory.

2. Push “Add” on The Source.
That station is now added to
your selection of stations in
memory.

4. To skip between preset 
stations: Push “|<” or “>|” 
on The Source or 

the remote control.

3. To delete a preset:
Push “Delete” on The Source.
That station is now removed
from your selection of stations
in memory.

Note: Activating this feature will
delete all stations that were
previously stored in 
memory. To prevent this from
accidentally occurring, the Auto
button will only activate if held
for a full second.