JBL ESC 350 Source User Manual / Operation Manual ▷ View online
– 17 –
Delay Time
The delay control allows
the user to set the sur-
round delay between 15
and 30 milliseconds in
one-millisecond increments.
the user to set the sur-
round delay between 15
and 30 milliseconds in
one-millisecond increments.
The best setting will
depend on the distance
between the main
listening area and the
front speakers as well as
depend on the distance
between the main
listening area and the
front speakers as well as
the distance between the
main listening area and
the rear speakers. The chart
at the bottom shows the
recommended settings.
main listening area and
the rear speakers. The chart
at the bottom shows the
recommended settings.
0 5 10 15
20 25 30 35 40
40
35
30
25
20
15
10
5
0
15ms
15ms
15ms
20ms
25ms
30ms
30ms
30ms
Distance (in feet) From Front Speakers
Distan
ce (in feet) fr
om Rear Speak
ers
Preferable Acceptable
Surround
Calibrate
+
–
Surround
Calibrate
+
–
Surround
Calibrate
+
–
REMOTE
Push “Calibrate” on the
remote control until “Delay”
appears in the display and
the corresponding LED on
top of the display is lit.
remote control until “Delay”
appears in the display and
the corresponding LED on
top of the display is lit.
REMOTE
Push “–” on the remote
control to decrease the
delay time.
control to decrease the
delay time.
REMOTE
Push “+” on the remote
control to increase the
delay time.
control to increase the
delay time.
CD
Open
Random
Power
Volume
Skip
Search
Tune
Stereo/Mono
– Bass +
Surround Mode
– Treble +
Tuner Presets
Auto Add
Tape/Aux
TV
Auto Tune
AM/FM
Repeat
Delete
Rear
Speakers
TM
Mute
Volume
CD
AM/FM
TV
Aux
Surround
Tone
Calibrate
Power
Sleep
+
–
+
–
The Source
Remote Control
ESC350 Simply Cinema OM 9/11/98 2:06 PM Page 17
– 18 –
If there is no sound from any
of the speakers, check the
following:
of the speakers, check the
following:
• Make sure the subwoofer is
plugged into an active AC wall
outlet.
• Make sure the Master Power
Switch, located on the rear of the
subwoofer, is in the
plugged into an active AC wall
outlet.
• Make sure the Master Power
Switch, located on the rear of the
subwoofer, is in the
“
On/Standby
”
position.
• Make sure there is a source –
for example, a VCR or television –
hooked up to the TV or tape/aux
input jacks on The Source.
• Make sure that the program
material is playing.
• Recheck the hookup connec-
tions.
• Make sure there is a source –
for example, a VCR or television –
hooked up to the TV or tape/aux
input jacks on The Source.
• Make sure that the program
material is playing.
• Recheck the hookup connec-
tions.
If most of the sound comes from
the center-channel speaker, with
little or no information from
the surround channels, note the
following:
the center-channel speaker, with
little or no information from
the surround channels, note the
following:
Although most of today’s televi-
sions are equipped with stereo
audio output jacks, some stereo
televisions have poor audio sec-
tions and are unable to provide a
Dolby Pro Logic encoded signal. In
the unlikely event that you experi-
sions are equipped with stereo
audio output jacks, some stereo
televisions have poor audio sec-
tions and are unable to provide a
Dolby Pro Logic encoded signal. In
the unlikely event that you experi-
ence this problem, connecting the
audio outputs from your hi-fi VCR,
laser disc player, DVD player, or
satellite receiver directly to one of
the inputs on The Source will pro-
vide a proper audio signal and
allow you to enjoy true Dolby Pro
Logic surround sound.
audio outputs from your hi-fi VCR,
laser disc player, DVD player, or
satellite receiver directly to one of
the inputs on The Source will pro-
vide a proper audio signal and
allow you to enjoy true Dolby Pro
Logic surround sound.
If there is no sound from the
surround speakers or sound is
very low, check the following:
surround speakers or sound is
very low, check the following:
• Check all connections between
the amplifier and each of the
speakers.
• Raise the surround volume
from the remote control
(see
the amplifier and each of the
speakers.
• Raise the surround volume
from the remote control
(see
“
Operation
”
section).
• Make sure the TV show or movie
you are watching is recorded in
Dolby Surround.
you are watching is recorded in
Dolby Surround.
If there is no sound from the
center speaker, check the
following:
center speaker, check the
following:
• Make sure that the processor
is in the Pro Logic mode. If it is
in Phantom or Stereo mode, the
center speaker will not play.
• Check the connections between
the subwoofer and the center
speaker.
is in the Pro Logic mode. If it is
in Phantom or Stereo mode, the
center speaker will not play.
• Check the connections between
the subwoofer and the center
speaker.
If you have low bass output,
check the following:
check the following:
• Experiment with placement of
the subwoofer. Remember, place
the subwoofer in a corner to get
maximum bass output from the
system.
• Increase the level of bass,
using the remote control.
• Adjust the level control on the
rear of the subwoofer.
the subwoofer. Remember, place
the subwoofer in a corner to get
maximum bass output from the
system.
• Increase the level of bass,
using the remote control.
• Adjust the level control on the
rear of the subwoofer.
If you are having trouble picking
up radio stations, check the
following:
up radio stations, check the
following:
• Make sure the antenna is
hooked up properly.
• Depending on your distance from
the station’s transmitter, you may
need to install an FM antenna on
the roof or in the attic.
hooked up properly.
• Depending on your distance from
the station’s transmitter, you may
need to install an FM antenna on
the roof or in the attic.
Troubleshooting
ESC350 Simply Cinema OM 9/11/98 2:06 PM Page 18
– 19 –
Specifications
Components
The Source
surround sound processor,
CD player, AM/FM tuner
Subwoofer
8" driver in a bass-reflex
enclosure
Satellite Speakers
3/4" tweeters,
3" midrange driver
System Remote
credit-card-sized
hand-held controller
surround sound processor,
CD player, AM/FM tuner
Subwoofer
8" driver in a bass-reflex
enclosure
Satellite Speakers
3/4" tweeters,
3" midrange driver
System Remote
credit-card-sized
hand-held controller
ESC350 System
Amplifier
200 watts total system output;
front channels:
35 watts x 3 @ .1% THD;
surround channels:
15 watts x 2 @ .1% THD;
subwoofer:
65 watts x 1 @ 1% THD
System Frequency
Response (–6dB)
35Hz – 20kHz
Signal-to-Noise Ratio
90dB
Input Impedance
20k ohms
Input Sensitivity
250mV
200 watts total system output;
front channels:
35 watts x 3 @ .1% THD;
surround channels:
15 watts x 2 @ .1% THD;
subwoofer:
65 watts x 1 @ 1% THD
System Frequency
Response (–6dB)
35Hz – 20kHz
Signal-to-Noise Ratio
90dB
Input Impedance
20k ohms
Input Sensitivity
250mV
The Source
Dimensions (H x W x D)
4-5/8 x 10-1/4 x 9-3/4 inches
117 x 260 x 248mm
Weight
5 lbs/2.3 kg
4-5/8 x 10-1/4 x 9-3/4 inches
117 x 260 x 248mm
Weight
5 lbs/2.3 kg
Subwoofer
Dimensions (H x W x D)
15-1/8 x 13 x 14-1/2 inches
384 x 330 x 368mm
Weight
34.5 lbs/15.7 kg
15-1/8 x 13 x 14-1/2 inches
384 x 330 x 368mm
Weight
34.5 lbs/15.7 kg
Satellites
Dimensions (H x W x D)
4-3/8 x 3-3/16 x 3-3/4 inches
111 x 81 x 95mm
Weight
.8 lbs/.4 kg
4-3/8 x 3-3/16 x 3-3/4 inches
111 x 81 x 95mm
Weight
.8 lbs/.4 kg
System Remote
Dimensions (H x W x D)
4-7/8 x 2-1/4 x 1/4 inches
124 x 57 x 6mm
Weight
.25 lbs/.11 kg
4-7/8 x 2-1/4 x 1/4 inches
124 x 57 x 6mm
Weight
.25 lbs/.11 kg
Occasional refinements
may be made to existing
products without notice,
but will always meet
or exceed original
specifications unless
otherwise stated.
products without notice,
but will always meet
or exceed original
specifications unless
otherwise stated.
ESC350 Simply Cinema OM 9/11/98 2:06 PM Page 19
A Harman International Company
©
1998 JBL, Incorporated. JBL and Simply Cinema are
registered trademarks of JBL, Incorporated.
*Trademarks of Dolby Laboratories.
8/98
*Trademarks of Dolby Laboratories.
8/98
Part No. ESC350OM
ESC350 Simply Cinema OM 9/11/98 2:06 PM Page 20