JBL ES 250PW (serv.man2) Service Manual ▷ View online
Parameter
Specification
Unit
QA Test
Limits
Conditions
Notes
Auto Mute/ Turn-OFF Time
5-15
minutes
5-15
T before muting, after signal is
removed
Auto turn of time (T) must be 5 > T < 15
Minutes
Tx Features
--
LFE Input
YES
--
functional
Single RCA Connector
Channel ID switch
YES
functional
4 Position switch, to select wireless channels
External power supply
requirements
18
VDC
functional
System provided with Power supply model
GPE-152, delivering 18VDC @ 400mA
Power consumption
Tx Standby Input Power
Tx Standby Input Power
1
Watts
Reference 120VAC line voltage
RED LED
Tx Standby input current
0.019
Amperes
Reference 120VAC line voltage
RED LED
Tx Idle Power
2.34
Watts
Reference 120VAC line voltage
Unit in operation Locked to Rx section Solid
GRN
Tx Idle Power
1.64
Watts
Reference 120VAC line voltage
Unit in operation NOT locked to Rx section
Power supply adapter
Manufacturer / model
Reference
GOLDEN PROFIT ELECTRONICS LTD. GPE-
152-180040W
Output Voltage
18
VDC
Reference @ Nom. line voltage
Max output current
0.4
ADC
Reference
Rating
7.2
VA
Reference
AC input voltage range
100-240
VAC
Reference
Universal type power supply
AC input frequency
50-60
Hz
Reference
Power supply weight
0.246
Lbs
Reference 112 grams
AC power cord type
n/a
Functional
Detachable, interchangeable via a
2 Pole IEC receptacle EN 60320
C7
230V model will include SCHUKO and UK
cords, 120V includes 120V US cord only
Power supply certification
YES
--
Reference
Power supply should be certified
under the applicable standards for
its end use EN/IEC 60065:2002
TUV/PSE
Other Parameters/Notes:
1. Volume control should be at the input buffer stage in order to lessen the possibility of clipping the input section with highly dynamic audio material.
1. Volume control should be at the input buffer stage in order to lessen the possibility of clipping the input section with highly dynamic audio material.
2. ALL SPECS SHOULD BE MEASURED AT NOMINAL LINE VOLTAGE.
ES250PW
4
ITEM #
PART NUMBER
DESCRIPTION
QTY
1 ES250PWCH
ES250PW
(Cherry)
1
ES250PWBE
ES250PW
(Beech)
1
ES250PWBK
ES250PW
(Black)
1
2
Serial
Number
1
3
Date
Label
1
4 431-000-06708-E
Bottom
Foam
1
5 431-000-06707-E
Top
Foam
1
6
Visit www.jbl.com
ES250PW Owner’s Manual
1
7 405-000-05181-E
Warranty
Card
1
8
Dessicant
1
9
400-000-08367-E
Outer Carton ES250PW (Cherry)
1
400-000-08368-E
Outer Carton ES250PW (Beech)
1
400-000-08371-E
Outer Carton ES250PW (Black)
1
10
Carton
Label
1
11
244-120-05243-1BAE
Grille w/ logo, packaged
1
12
Accessory box consisting of:
1
a
Carton
1
b ES250PW120V-LAUNCH
or 015-7600-00037-E
Transmitter 1
c
Power Supply, transmitter
1
d
151-OGPE15200-E
120v AC cord for Power Supply
1
e 152-U60201A02-E
120v AC cord for ES250PW
1
f 165-02000101-E
6 ft. Audio cable RCA-RCA
1
g 165-045801100-E
15 ft. Audio cable RCA-RCA
1
h 376-000-01092-E
Wall Mount Bracket, transmitter
1
j 373-000-05067-E
Adhesive feet, round, (set 4)
1
ES250PW
5
Sub In
ID
CODE
DC18V
1234
4
¡
Power Switch
™
Line-Level Inputs
£
LFE Input
¢
Low-Pass Selector
(Wireless Input Only)
(Wireless Input Only)
∞
ID-Code Selector
§
Crossover Adjustment Control
¶
Subwoofer-Level (Volume) Control
•
Phase Switch
ª
Wireless Antenna
Transmitter
‚
Transmitter Antenna
⁄
Transmitter Power-Supply Input
B
Transmitter ID-Code Selector
‹
Transmitter Sub Input
CONTROLS AND CONNECTIONS
Rear Panel
Power
On
Off
AC 120V~60Hz
2A
Antenna
Crossover
[Hz]
Phase
Level
Sub In
Wireless
LFE
L
R
ff
On
O
Low-Pass
ID Code
‚
⁄
B
‹
¡
™
£
¢
∞
§
¶
•
ª
JBLP2706_ES150-250PW-120om 5/20/08 4:15 PM Page 4
ES250PW
6
5
SYSTEM CONNECTIONS
Choose either Wireless or Wired connection, then follow the appropriate instructions.
If your receiver/processor does not contain a Dolby Digital or DTS processor
but has subwoofer outputs:
but has subwoofer outputs:
Line In
Sub In
LFE
L
R
Crossover
[Hz]
Level
Wireless
ID Code
ff
On
O
Low-Pass
Crossover
[Hz]
Level
Line In
Sub In
LFE
L
R
ff
On
O
Low-Pass
Wireless
ID Code
ff
On
O
Low-Pass
WIRED
Connecting the Subwoofer for Wired Applications
If you have a Dolby
®
Digital or DTS
®
receiver/processor with a low-frequency
effects (LFE) or subwoofer output:
NOTE: If your receiver/processor has only one sub out, you may use
either the L or R input.
either the L or R input.
WIRELESS
Connecting the Subwoofer for Wireless Applications
1. Connect a subwoofer cable from the subwoofer or LFE output of your receiver
to the Sub In
C
on the transmitter.
2. Plug the transmitter module’s power supply into the wall outlet, and connect
the included power cord to the transmitter
A
. Make sure the Transmitter
Antenna
‚
is extended upward.
3. Set the ID code on the transmitter and subwoofer (
B
and
∞
) to the
same position, as described on page 6. When connected properly, the LED
on the top of the subwoofer will be orange.
on the top of the subwoofer will be orange.
4. Set the Low-Pass Selector
¢
to the “Off” position.
NOTES:
You may also connect a variable full-range output from an A/V receiver or
processor, such as a preamp output or second-room output. In this case,
set the Low-Pass Selector
You may also connect a variable full-range output from an A/V receiver or
processor, such as a preamp output or second-room output. In this case,
set the Low-Pass Selector
¢
to the “On” position and set the crossover
adjustment as described on page 6.
Some receivers have two subwoofer outputs. In that case, use either connector.
Sub In
ID
CODE
DC18V
1234
JBLP2706_ES150-250PW-120om 5/20/08 4:15 PM Page 5
ES250PW
7
Click on the first or last page to see other ES 250PW (serv.man2) service manuals if exist.