JBL EMC - CB Certificate EMC - CB Certificate ▷ View online
Test Report issued under the responsibility of:
TEST REPORT
IEC 60950-1
Information technology equipment
– Safety –
Part 1: General requirements
Report Number. ............................. :
17040045 001
Date of issue ................................. :
Jun. 23, 2014
Total number of pages ...................
85
Ap
plicant’s name .......................... : Group Intellect Power Technology Limited
Address ......................................... : I Section, Xicheng industrial district, Heng Li Town, Dongguan,
Guangdong, P.R. China
Test specification:
Standard ........................................ : IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
Test procedure .............................. : CB Scheme
Non-standard test method ............ : N/A
Test Report Form No. ................... : IEC60950_1F
Test Report Form(s) Originator .... : SGS Fimko Ltd
Master TRF .................................... : Dated 2014-02
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context .
copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting
from the reader's interpretation of the reproduced material due to its placement and context .
If this Test Report Form is used by non-IECEE members, the IECEE/IEC logo and the reference to the
CB Scheme procedure shall be removed.
CB Scheme procedure shall be removed.
This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02.
General disclaimer:
The test results presented in this report relate only to the object tested.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.
This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing
Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB,
responsible for this Test Report.
Page 3 of
85
Report No. 17040045 001
TRF No. IEC60950_1F
List of Attachments (including a total number of pages in each attachment):
Summary of testing:
Tests performed (name of test and test clause):
1. Following tests performed during evaluation
Clause(s)
Test(s)
1.6.2
Input Current Test
1.7.11
Durability of Marking Test
2.1.1.1
Access to energized parts
2.1.1.5
Energy Hazard in Operator Access Area
2.1.1.7
Discharge of Capacitors
2.2.2
SELV limits for Normal Conditions
2.2.3
SELV limits for Abnormal Conditions
2.4.2
Limited Current circuit
2.5
Limited Power Sources
2.9.2
Humidity Conditioning
2.10.2
Working Voltage over Insulation
2.10.3 &
2.10.4
2.10.4
Clearance and creepage distance
measurements
measurements
4.2.4
Steady force test
4.2.6
Drop test
4.2.7
Stress relief test
4.3.6
Torque Test
4.5
Maximum Temperature Test
4.5.5
Ball Pressure Test
5.1.6
Touch Current and PE current
5.2
Electric Strength Test
5.3
Fault Condition Test
Additional
test
test
Contact resistance test
The unit passed all tests.
Testing location:
All tests as described in Test Case and
Measurement Sections were performed at the
laboratory described on page 2
Measurement Sections were performed at the
laboratory described on page 2