JBL DUET (serv.man8) EMC - CB Certificate ▷ View online
- Page 1 of 51 -
www.nemko.com
Report No.
36648
This Test Report , when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory, or by a laboratory having
special agreement with Nemko.
special agreement with Nemko.
TEST REPORT
IEC 60950-1 and EN 60950-1, First Edition
Information technology equipment – Safety –
Part 1: General requirements
Report reference No ...................... : 36648
Tested by
(printed name and signature) .......... : Robert Fleury
(printed name and signature) .......... : Robert Fleury
Approved by
(printed name and signature) .......... : Grant Schmidbauer
(printed name and signature) .......... : Grant Schmidbauer
Date of issue ................................... : 27 January 2005
Testing Laboratory Name ............. : Nemko USA, Inc.
Phone: (+1) 858 755 5525
Address ........................................... : 11696 Sorrento Valley Rd., Suite F, San Diego, CA 92121 USA
Testing location ............................... : CBTL
CCATL
SMT
TMP
Address ........................................... : 11696 Sorrento Valley Rd., Suite F, San Diego, CA 92121 USA
Applicant's Name .......................... :
Harman Multimedia
Address ........................................... :
Test specification
Standard ........................................... : IEC 60950-1:2001 and EN 60950-1:2001, First Edition
Test procedure ................................ : CB–scheme
Non-standard test method ............... : Not used
Test Report Form No. .................... : IECEN60950_1B
TRF originator . ............................................... : SGS Fimko Ltd
Master TRF .................................................... : dated 2003-03
© 2002 IEC System for Conformity Testing and Certification of Electrical Equipment (IECEE),
Geneva, Switzerland. All rights reserved.
This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s
interpretation of the reproduced material due to its placement and context.
owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader’s
interpretation of the reproduced material due to its placement and context.
Test item description .................... :
Computer Speaker System
Trademark ....................................... :
Manufacturer ................................... :
Harman Multimedia
Model and/or type reference ........... :
Duet
Serial number .................................. : Prototype
Rating(s) ........................................... :
1.1 A, 15 VAC, Class III
N-TRF Rev 2004-05
- Page 2 of 51 -
www.nemko.com
Report No.
36648
TRF No.:IECEN60950_1B
Name and address of production-sites (Factories):
Harman (Suzhou) Electronics Co. Ltd.
3, Jinshan Road, Suzhou New District,
Jiangsu Province, China
3, Jinshan Road, Suzhou New District,
Jiangsu Province, China
Copy of marking plate:
Bottom label
Safety marking
- Page 3 of 51 -
www.nemko.com
Report No.
36648
TRF No.:IECEN60950_1B
Tested according to national requirements for the following countries:
All CENELEC members as listed in EN 60950-1:2001 + A11:2004.
All CB members as listed in CB Bulletin 107A, May 2004.
At the time of issuing this report only limited countries are listed for IEC 60950-1:2001, in addition country
deviations for IEC 60950 3
All CB members as listed in CB Bulletin 107A, May 2004.
At the time of issuing this report only limited countries are listed for IEC 60950-1:2001, in addition country
deviations for IEC 60950 3
rd
ed., are included.
List from IEC 60950-1:
Countries listed in CB Bulletin No. 107A, dated May
2004 as follows: Argentina (AR), Austria (AT),
Australia (AU), Belgium (BE), Canada (CA),
Switzerland (CH), Germany (DE), Denmark (DK),
Finland (FI), France (FR), United Kingdom (GB),
Greece (GR), Hungary (HU), Israel (IL), India (IN),
Italy (IT), Korea (KR), Malaysia (MY), Netherlands
(NL), Norway (NO), Poland (PL), Sweden (SE),
Singapore (SG), Slovenia (SI), United States (US).
All country deviations listed in the CB Bulletin are
covered by the Common Modifications, Special
National Conditions, National Deviations, and
National Requirements noted above except for the
following countries which are documented in
Country Deviation Appendixes attached to this
report:
Australia (including New Zealand): CB Bulletin No.
107A, dated May 2004.
Canada: CB Bulletin No. 107A, dated May 2004.
Korea: CB Bulletin No. 107A, dated May 2004.
United States: CB Bulletin No. 107A, dated May
2004.
Countries listed in CB Bulletin No. 107A, dated May
2004 as follows: Argentina (AR), Austria (AT),
Australia (AU), Belgium (BE), Canada (CA),
Switzerland (CH), Germany (DE), Denmark (DK),
Finland (FI), France (FR), United Kingdom (GB),
Greece (GR), Hungary (HU), Israel (IL), India (IN),
Italy (IT), Korea (KR), Malaysia (MY), Netherlands
(NL), Norway (NO), Poland (PL), Sweden (SE),
Singapore (SG), Slovenia (SI), United States (US).
All country deviations listed in the CB Bulletin are
covered by the Common Modifications, Special
National Conditions, National Deviations, and
National Requirements noted above except for the
following countries which are documented in
Country Deviation Appendixes attached to this
report:
Australia (including New Zealand): CB Bulletin No.
107A, dated May 2004.
Canada: CB Bulletin No. 107A, dated May 2004.
Korea: CB Bulletin No. 107A, dated May 2004.
United States: CB Bulletin No. 107A, dated May
2004.
- Page 4 of 51 -
www.nemko.com
Report No.
36648
TRF No.:IECEN60950_1B
Summary of testing:
Normal load as described in Annex L or as
close as possible to the most severe
normal use.
close as possible to the most severe
normal use.
For the test setup, a 1kHz sinewave was used to find 1/8
th
output level. Pink noise was used for the duration of the
testing.
testing.
General
Unit is externally powered by a limited power source (15V
AC, 1.1 A) complying with Sub-Clause 2.5. The external
power supply was not evaluated in this test report.
AC, 1.1 A) complying with Sub-Clause 2.5. The external
power supply was not evaluated in this test report.
1.7.2 Safety instructions.
Class III equipment with an enclosure made of HB-Material,
using a non-special connector for the AC/DC input must
have a marking stating the manufacturer and model number
of the power supply to be used. This marking is applied.
using a non-special connector for the AC/DC input must
have a marking stating the manufacturer and model number
of the power supply to be used. This marking is applied.
1.7.14 Language of safety markings/
instructions.
instructions.
Instructions and equipment marking related to safety shall
by applied in a language which is acceptable in the country
in which the equipment is to be sold.
by applied in a language which is acceptable in the country
in which the equipment is to be sold.
List of attachments:
Country deviations: Australia (6 pages), Canada (5 pages), China (1 page), Israel (1 page),
Japan (5 pages), Korea (1 page), Singapore (1 page), USA (5 pages).