JBL CST55 (serv.man8) User Manual / Operation Manual ▷ View online
9
If there is no sound from any
of the speakers:
of the speakers:
• Check that receiver/amplifier
is on and a source is playing.
is on and a source is playing.
• Check that the powered
subwoofer is plugged in and is
turned on (Power switch
subwoofer is plugged in and is
turned on (Power switch
a
pushed in).
• Check all wires and
connections between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
connections between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
• Review proper operation of
your receiver/amplifier.
your receiver/amplifier.
If there is no sound coming
from one speaker:
from one speaker:
• Check the “Balance” control
on your receiver/amplifier.
on your receiver/amplifier.
• Check all wires and
connections between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
connections between receiver/
amplifier and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
• In Dolby Digital or DTS modes,
make sure that the receiver/
amplifier is configured so that
the speaker in question is
enabled.
make sure that the receiver/
amplifier is configured so that
the speaker in question is
enabled.
• Turn off all electronics and
switch the speaker in question
with one of the other speakers
that is working correctly. Turn
everything back on, and
determine whether the problem
has followed the speaker or has
remained in the same channel.
If the problem is in the same
channel, the source of the
problem is most likely with your
receiver or amplifier, and you
should consult the owner’s
manual for that product for
further information. If the
problem has followed the
speaker, consult your dealer for
further assistance or, if that is
not possible, visit www.jbl.com.
switch the speaker in question
with one of the other speakers
that is working correctly. Turn
everything back on, and
determine whether the problem
has followed the speaker or has
remained in the same channel.
If the problem is in the same
channel, the source of the
problem is most likely with your
receiver or amplifier, and you
should consult the owner’s
manual for that product for
further information. If the
problem has followed the
speaker, consult your dealer for
further assistance or, if that is
not possible, visit www.jbl.com.
If there is no sound from the
center speaker:
center speaker:
• Check all wires and
connections between receiver/
amplifier and speaker. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
connections between receiver/
amplifier and speaker. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
• If your receiver/processor is
set in Dolby Pro Logic mode,
make sure the center speaker is
not in phantom mode.
set in Dolby Pro Logic mode,
make sure the center speaker is
not in phantom mode.
• If your receiver/processor is
set in one of the Dolby Digital or
DTS modes, make sure the
receiver/processor is
configured so that the center
speaker is enabled.
set in one of the Dolby Digital or
DTS modes, make sure the
receiver/processor is
configured so that the center
speaker is enabled.
If the system plays at low
volumes but shuts off as
volume is increased:
volumes but shuts off as
volume is increased:
• Check all wires and
connections between receiver/
processor and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
connections between receiver/
processor and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
• If more than one pair of main
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
If there is low (or no) bass
output:
output:
• Make sure the connections to
the left and right “Speaker
Inputs” have the correct
polarity (+ and –).
the left and right “Speaker
Inputs” have the correct
polarity (+ and –).
• Make sure the subwoofer is
plugged into an active electrical
outlet and is turned on (Power
switch
plugged into an active electrical
outlet and is turned on (Power
switch
a
pushed in).
• In Dolby Digital or DTS modes,
make sure your receiver/
processor is configured so that
the subwoofer and LFE output
are enabled.
make sure your receiver/
processor is configured so that
the subwoofer and LFE output
are enabled.
• Switch the Phase switch
c
to
the opposite position, and select
the position that results in the
most pleasing bass response.
the position that results in the
most pleasing bass response.
If there is no sound from
the surround speakers:
the surround speakers:
• Check all wires and
connections between receiver/
processor and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
connections between receiver/
processor and speakers. Make
sure all wires are connected.
Make sure none of the speaker
wires are frayed, cut or
punctured, or touching each
other.
• Review proper operation of
your receiver/amplifier and its
surround sound features.
your receiver/amplifier and its
surround sound features.
• Make sure the movie or
TV show you are watching
is recorded in a surround sound
mode. If it is not, check to see
whether your receiver/
processor has other surround
modes you may use.
TV show you are watching
is recorded in a surround sound
mode. If it is not, check to see
whether your receiver/
processor has other surround
modes you may use.
• In Dolby Digital or DTS modes,
make sure your receiver/
processor is configured so that
the surround speakers are
enabled. When five satellites
are in use, remember to
configure your receiver or
processor for 6.1-channel
operation, and when six
satellites are in use, configure
your receiver or processor for
7.1 channels.
make sure your receiver/
processor is configured so that
the surround speakers are
enabled. When five satellites
are in use, remember to
configure your receiver or
processor for 6.1-channel
operation, and when six
satellites are in use, configure
your receiver or processor for
7.1 channels.
• Review the operation of your
DVD player and the jacket of
your DVD to make sure that the
DVD features the desired Dolby
Digital or DTS mode, and that
you have properly selected that
mode using both the DVD
player’s menu and the DVD
disc‘s menu.
DVD player and the jacket of
your DVD to make sure that the
DVD features the desired Dolby
Digital or DTS mode, and that
you have properly selected that
mode using both the DVD
player’s menu and the DVD
disc‘s menu.
TROUBLESHOOTING
English
SYSTEM
Frequency Response 27Hz – 30kHz (–6dB)
Frequency Response 27Hz – 30kHz (–6dB)
CST55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
CSB5
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
CSC55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
CSS10
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
SPECIFICATIONS
All features and specifications are subject to change
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
maximum power levels.
®
JBL and Harman International are registered trademarks, and JBL Cinema Sound,
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA
2, route de Tours, 72500 Chateau du Loir, France
516.255.4JBL (4525) (USA only) www.jbl.com
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the products described
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
Declaration of Conformity
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
CSB5, CSC55 and CST55
CSS10 (230V only)
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the product described
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
SYSTEM
Frequency Response 27Hz – 30kHz (–6dB)
Frequency Response 27Hz – 30kHz (–6dB)
CST55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
CSB5
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
CSC55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
CSS10
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
SPECIFICATIONS
All features and specifications are subject to change
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
maximum power levels.
®
JBL and Harman International are registered trademarks, and JBL Cinema Sound,
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA
2, route de Tours, 72500 Chateau du Loir, France
516.255.4JBL (4525) (USA only) www.jbl.com
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the products described
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
Declaration of Conformity
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
CSB5, CSC55 and CST55
CSS10 (230V only)
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the product described
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
SYSTEM
Frequency Response 27Hz – 30kHz (–6dB)
Frequency Response 27Hz – 30kHz (–6dB)
CST55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 Watt/1 meter
Tweeter One 3/4" (19mm) titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
1168 x 286 x 286mm (46" x 11-1/4" x 11-1/4")
Weight 7.7kg (17 lb)
CSB5
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
Maximum Recommended Amplifier Power
125 Watts*
Power Handling 40W continuous/300W peak
Frequency Response 60Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 88dB @ 1 watt/1 meter
Tweeter 3/4" (19mm) Titanium-laminate dome,
video-shielded
Woofer 5" (130mm) Transducer with PolyPlas™
cone, neodymium magnet and HeatScape™ motor
structure, video-shielded
Dimensions (H x W x D) (including base and grille)
363 x 155 x 116mm (14-5/16" x 6-1/8" x 4-9/16")
Weight 2.3kg (5 lb)
Dimensions (H x W x D) (without base and with
wall-mount bracket and grille)
338 x 155 x 130mm (13-5/16" x 6-1/8" x 5-1/8")
Weight 2kg (4.5 lb)
CSC55
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
Maximum Recommended Amplifier Power
150 Watts*
Power Handling 50W Continuous/300W Peak
Frequency Response 55Hz – 30kHz (–6dB)
Nominal Impedance 8 Ohms
Sensitivity 90dB @ 1 watt/1 meter
Tweeter One 19mm (3/4") titanium-laminate dome,
video-shielded
Woofers Dual 130mm (5") transducers with
PolyPlas™ cones, neodymium magnets and
HeatScape™ motor structure, video-shielded
Dimensions (H x W x D)
(including wall-mount bracket and grille)
159 x 667 x 108mm (6-1/4" x 26-1/4" x 4-1/4")
Weight 4.5kg (10 lb)
CSS10
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
Amplifier Power 150 Watts RMS
Frequency Response 27Hz – Low-pass crossover
setting at signal source
Low-Frequency Driver
250mm (10") cone and HeatScape™
motor structure, video-shielded
Input LFE preamp level
Dimensions (H x W x D) (including feet)
464 x 337 x 406mm (18-1/4" x 13-1/4" x 16")
Weight 19.5kg (43 lb)
SPECIFICATIONS
All features and specifications are subject to change
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
without notice.
Dolby and Pro Logic are registered trademarks of Dolby
Laboratories.
DTS is a registered trademark of DTS, Inc.
*The maximum recommended amplifier power rating
will ensure proper system headroom to allow for
occasional peaks.
We do not recommend sustained operation at these
maximum power levels.
®
JBL and Harman International are registered trademarks, and JBL Cinema Sound,
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PolyPlas, HeatScape and Pro Sound Comes Home are trademarks,
of Harman International Industries, Incorporated.
Part No.406-000-05331-E
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA
2, route de Tours, 72500 Chateau du Loir, France
516.255.4JBL (4525) (USA only) www.jbl.com
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the products described
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
in this owner’s manual are in compliance with technical
standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
Declaration of Conformity
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 6/06
CSB5, CSC55 and CST55
CSS10 (230V only)
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
72500 Chateau du Loir
France
declare in own responsibility that the product described
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
in this owner’s manual is in compliance with technical
standards:
EN 55013:2001+A1:2003
EN 55020:2002+A1:2003
EN 61000-3-2:2000
EN 61000-3-3:1995+A1:2001
EN 60065:2002
