JBL BALBOA CENTER (serv.man9) User Manual / Operation Manual ▷ View online
English
TROUBLESHOOTING
If there is no sound from any
of the speakers:
of the speakers:
• Check that receiver/ampli-
fier is on and that a source is
playing.
fier is on and that a source is
playing.
• Review proper operation of
your receiver/amplifier.
your receiver/amplifier.
If there is no sound coming
from one speaker:
from one speaker:
• Check the “Balance” control
on your receiver/amplifier.
on your receiver/amplifier.
• Check all wires and connec-
tions between receiver/ ampli-
fier and speakers.
tions between receiver/ ampli-
fier and speakers.
• Make sure no wires are
touching other wires or
terminals and creating a short
circuit.
touching other wires or
terminals and creating a short
circuit.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
• In Dolby* Digital or DTS®
modes, make sure that the
receiver/processor is config-
ured so that the speaker in
question is enabled.
modes, make sure that the
receiver/processor is config-
ured so that the speaker in
question is enabled.
• Turn off all electronics and
switch the speaker in question
with one of the other speakers
that is working correctly. Turn
everything back on, and deter-
mine whether the problem has
followed the speaker, or has
remained in the same channel.
If the problem is in the same
channel, the source of the
problem is most likely with
your receiver or amplifier, and
you should consult the
owner’s manual for that prod-
uct for further information. If
the problem has followed the
speaker, consult your dealer
for further assistance or, if that
is not possible, visit
www.jbl.com
for further information.
switch the speaker in question
with one of the other speakers
that is working correctly. Turn
everything back on, and deter-
mine whether the problem has
followed the speaker, or has
remained in the same channel.
If the problem is in the same
channel, the source of the
problem is most likely with
your receiver or amplifier, and
you should consult the
owner’s manual for that prod-
uct for further information. If
the problem has followed the
speaker, consult your dealer
for further assistance or, if that
is not possible, visit
www.jbl.com
for further information.
If the system plays at low vol-
umes but shuts off as volume
is increased:
umes but shuts off as volume
is increased:
• Check all wires and con-
nections between receiver/
amplifier and speakers.
nections between receiver/
amplifier and speakers.
• Make sure all wires are con-
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
nected. Make sure none of the
speaker wires are frayed, cut
or punctured.
• If more than one pair of main
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
speakers is being used, check
the minimum impedance
requirements of your receiver/
amplifier.
If there is no (or low) bass
output:
output:
• Make sure the polarities
(+ and –) of the left and right
“Speaker Inputs” are
connected properly.
(+ and –) of the left and right
“Speaker Inputs” are
connected properly.
• If your system includes a
powered subwoofer, make
sure it is connected correctly,
plugged into an active AC out-
let and turned on. See the
owner's guide for your sub-
woofer for more information.
powered subwoofer, make
sure it is connected correctly,
plugged into an active AC out-
let and turned on. See the
owner's guide for your sub-
woofer for more information.
• If your system does not
include a powered subwoofer,
consider adding one for use
with digital “.1” surround for-
mats.
include a powered subwoofer,
consider adding one for use
with digital “.1” surround for-
mats.
If there is no sound from
the surround speakers:
the surround speakers:
• Check all wires and connec-
tions between receiver/ampli-
fier and speakers. Make sure
all wires are connected. Make
sure none of the speaker
wires are frayed, cut or punc-
tured.
tions between receiver/ampli-
fier and speakers. Make sure
all wires are connected. Make
sure none of the speaker
wires are frayed, cut or punc-
tured.
• Review proper operation of
your receiver/amplifier and its
surround sound features.
your receiver/amplifier and its
surround sound features.
• Make sure the movie or TV
show you are watching is
recorded in a surround sound
mode. If it is not, check to see
whether your receiver/ampli-
fier has other surround modes
you may use.
show you are watching is
recorded in a surround sound
mode. If it is not, check to see
whether your receiver/ampli-
fier has other surround modes
you may use.
• In Dolby Digital or DTS
modes, make sure your
receiver/processor is config-
ured so that the surround
speakers are enabled.
modes, make sure your
receiver/processor is config-
ured so that the surround
speakers are enabled.
• If you are using both side
surround and back surround
speakers, make sure that your
receiver/processor is config-
ured for 6.1/7.1 operation.
surround and back surround
speakers, make sure that your
receiver/processor is config-
ured for 6.1/7.1 operation.
• Review the operation of your
DVD player and the jacket of
your DVD to make sure that
the DVD features the desired
Dolby Digital or DTS mode,
and that you have properly
selected that mode using both
the DVD player’s menu and the
DVD disc’s menu.
DVD player and the jacket of
your DVD to make sure that
the DVD features the desired
Dolby Digital or DTS mode,
and that you have properly
selected that mode using both
the DVD player’s menu and the
DVD disc’s menu.
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau-du-Loir
France
72500 Chateau-du-Loir
France
declare in own responsibility that the products
described in this owner’s manual are in compliance
with technical standards:
described in this owner’s manual are in compliance
with technical standards:
EN 61000-6-3:2001
EN 61000-6-1:2001
EN 61000-6-1:2001
Gary Mardell
Harman Consumer Group International
Chateau-du-Loir, France 1/05
SPECIFICATIONS
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
** The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
recommend sustained operation at these maximum power levels.
All features and specifications are subject to change without notice.
All dimensions include grilles and feet, but not spikes.
© 2005 Harman International Industries, Incorporated
JBL is a registered trademark, and IsoPower, FreeFlow and Straight-Line Signal
Path are trademarks, of Harman International Industries, Incorporated.
Path are trademarks, of Harman International Industries, Incorporated.
Part No.406-000-05179
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
2, route de Tours, 72500 Chateau-du-Loir, France
516.255.4JBL (4525) www.jbl.com
BALBOA 10
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminal
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
BALBOA 30
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
BALBOA CENTER
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
SPECIFICATIONS
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
** The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
recommend sustained operation at these maximum power levels.
All features and specifications are subject to change without notice.
All dimensions include grilles and feet, but not spikes.
© 2005 Harman International Industries, Incorporated
JBL is a registered trademark, and IsoPower, FreeFlow and Straight-Line Signal
Path are trademarks, of Harman International Industries, Incorporated.
Path are trademarks, of Harman International Industries, Incorporated.
Part No.406-000-05179
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
2, route de Tours, 72500 Chateau-du-Loir, France
516.255.4JBL (4525) www.jbl.com
BALBOA 10
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminal
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
BALBOA 30
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
BALBOA CENTER
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
SPECIFICATIONS
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
** The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do not
recommend sustained operation at these maximum power levels.
recommend sustained operation at these maximum power levels.
All features and specifications are subject to change without notice.
All dimensions include grilles and feet, but not spikes.
© 2005 Harman International Industries, Incorporated
JBL is a registered trademark, and IsoPower, FreeFlow and Straight-Line Signal
Path are trademarks, of Harman International Industries, Incorporated.
Path are trademarks, of Harman International Industries, Incorporated.
Part No.406-000-05179
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797
2, route de Tours, 72500 Chateau-du-Loir, France
516.255.4JBL (4525) www.jbl.com
BALBOA 10
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way 130mm (5") bookshelf
Maximum Recommended
Amplifier Power**
125W
Power Handling
(Continuous/Peak)
60W/240W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
86dB
Frequency Response (–3dB)
68Hz – 20kHz
Crossover Frequency
3000Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate dome
Low-Frequency Transducer
130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminal
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
259mm x 165mm x 210mm
Weight per Speaker
3.9kg
BALBOA 30
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
3-Way 170mm (6") floorstanding
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
80W/320W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
47Hz – 20kHz
Crossover Frequencies
600Hz, 3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome
Midrange Transducer
100mm (4") Pure-cellulose-fiber
cone, shielded
Low-Frequency Transducer
170mm (6") Pure-cellulose-fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
5-Way binding posts
Dimensions (H x W x D)
(With grille and feet)
889mm x 229mm x 321mm
Weight per Speaker
14.5kg
BALBOA CENTER
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
Description
2-Way dual 130mm (5") center
Maximum Recommended
Amplifier Power**
150W
Power Handling
(Continuous/Peak)
75W/300W
Nominal Impedance
8 Ohms
Sensitivity (2.83V/1m)
90dB
Frequency Response (–3dB)
80Hz – 20kHz
Crossover Frequency
3500Hz
High-Frequency Transducer
19mm (3/4") Titanium-laminate
dome, shielded
Low-Frequency Transducer
Dual 130mm (5") Pure-cellulose fiber
cone, shielded
Baffle
Low diffraction, IsoPower
™
Port
FreeFlow
FreeFlow
™
flared
Network
Straight-Line Signal Path
Straight-Line Signal Path
™
(SSP)
Terminals
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
5-Way binding posts
Dimensions (H x W x D)
(With grille)
170mm x 479mm x 260mm
Weight per Speaker
6.9kg
Display
