Harman Kardon SB 15 (serv.man5) Service Manual ▷ View online
NEW SECTION FOR THE SB 15 OWNER’S MANUAL.
SB 15/230 How to Switch the system on:
Manually:
If the SB 15/230 is manually put into Standby on the ON/OFF Button on the SB 15 unit itself, it can only be
switched back ON by manually pressing the ON/OFF button again.
switched back ON by manually pressing the ON/OFF button again.
Auto Turn on:
The SB 15/230 automatically enters Standby‐mode after approx. 15 minutes if no audio signal is detected.
This can also be forced by learning (for example) the TV set’s remote control “Off” code into the SB 15/230
(See owner’s manual).
This can also be forced by learning (for example) the TV set’s remote control “Off” code into the SB 15/230
(See owner’s manual).
Due to Power saving regulations, the SB 15 does not “listen” to the Audio Inputs, unless it senses a remote
signal first, which can be any kind of remote signal (it does not have to be a learned remote code ‐ turning
ON the TV or sending any other infrared remote code will be enough). The remote signal will tell the SB
15/230 to start up automatically as soon as audio is detected on (first) the Digital or (second) the Analog
audio Input. If no signal is detected by the Inputs, the SB 15 will go back into total Standby again after
approx 15 minutes.
signal first, which can be any kind of remote signal (it does not have to be a learned remote code ‐ turning
ON the TV or sending any other infrared remote code will be enough). The remote signal will tell the SB
15/230 to start up automatically as soon as audio is detected on (first) the Digital or (second) the Analog
audio Input. If no signal is detected by the Inputs, the SB 15 will go back into total Standby again after
approx 15 minutes.
MATRIX OF ON/OFF FUNCTIONS.
Power OFF function SB 15 Status
Way to Power On
Comment
Music sense OFF.
Remote sense is OFF
to avoid unit powering
ON.
Manual Power Off
Button on SB 15 unit Remote sense OFF.
Manual Power On
Button only!
SB 15 switches music
sense ON by IR
signal, then powers
ON 5-10secs after
music is sensed on
either (first) digital or
(second) analog
Inputs.
IR Activity from any
remote
(TV/SAT/VCR/DVD/...)
sensed by the SB 15
switches the music
sense ON. There is no
need to learn any
remote code to do
this.
Auto Standby
(Automatic if audio is
Off or not present for
more than 15 min)
Music sense OFF,
Remote sense ON.
Or press SB 15
manual Power button.
SB 15 switches music
sense ON by IR
signal, then powers
ON 5-10secs after
music is sensed on
either (first) digital or
(second) analog
Inputs.
By remote control
(usually TV Remote,
but any remote will
do).
Music sense OFF,
Remote sense ON.
Or press SB 15
manual Power button.
IR Activity from any
remote
(TV/SAT/VCR/DVD/...)
sensed by the SB 15
switches the music
sense ON. There is no
need to learn any
remote code to do
this.
harman/kardon
SB 15/230 Service Manual
Page 9 of 30
harman/kardon
SB 15/230 Service Manual
Page 10 of 30
harman/kardon
SB 15/230 Service Manual
Page 11 of 30
數 量
料 號
名 稱
編 號
依ECN No. 091043 更改
保存年限: 永久
日 期
表單編號:DM-4-D-013 1版
頁 次
版 本
確 認
製 作
客 戶:JBL
機 種:SB 15CNTR/230
作 業 指 示
承 認
2009/12/25
0
1
352-AM04008C1334-E
16
Bottom panel
315-ABS-05231-0BAE
1
Baffle
243-030-05259-0BAE
1
20
352-AM03510D112-E
依ECN No. 更改
305-ABS-05037-0BAE
2
依ECN No. 更改
Screw for
Amplifier
Amplifier
Crossover
Tweeter
32DM20AX-HT03-E
2
Top panel
315-ABS-05230-0BAE
Rear Enclosure
1
蔣國正
蔣國正
Screw for
crossover
crossover
352-AM03008C1086-E
22
Crossover
013-7600-05766-E
1
螺絲均要點膠
Side Cap
LOGO
Grille
329-030-05464-0BAE
1
316-AG-00556-0VAE
1
247-030-05099-0BAE
1
013-7600-05766-1E
1
Foot
320-NBR-05214-0BAE
2
010-0N25-05265-E
Amplifier
1
Screw for woofer
Insulation foam
328-000-05855-0WAE
2
Woofer
32PF55JZP-PW02-E
4
Gasket
398-ABS-05062-E
2
Gasket
214-000-05409-0BAE
4
214-000-05408-0BAE
4
Gasket
蔣國正
harman/kardon
SB 15/230 Service Manual
Page 12 of 30
Harman/Kardon SB 15/230 Center Exploded View
DISASSEMBLY OF THE SB 15 SOUNDBAR UNIT:
1 - Take out the plastic end caps of the Sound-bar.
2 - Remove the 2 glossy plastic panels carefully
3 - Unscrew the 2 halfs of the plastic housing (16-20 screws)
4 - gently pull apart the 2 halfs of the Sound-bar speaker.
Re-assemble in reverse order...
1 - Take out the plastic end caps of the Sound-bar.
2 - Remove the 2 glossy plastic panels carefully
3 - Unscrew the 2 halfs of the plastic housing (16-20 screws)
4 - gently pull apart the 2 halfs of the Sound-bar speaker.
Re-assemble in reverse order...
Click on the first or last page to see other SB 15 (serv.man5) service manuals if exist.