Harman Kardon ONYX STUDIO 3 Service Manual ▷ View online
17.
拔下
Speaker Connector
Release the speaker connector.
18.
用螺丝刀取下主板螺丝
*4
Loosen the 4 screws (BB_3*8.2mm) by
screwdriver.
19.
取出主板
Remove PCBA.
20.
拨出
Antenna Connector
Release the Antenna Connector.
21.
取下
Rubber Ring
Release the rubber ring.
22.
取下
Key PCB
Release the key PCB.
1
2
3
4
23.
用螺丝刀拆掉
Soft Dome Tweeter
螺丝
*4
Loosen the 4 screws (BB_3*10.2mm) of Soft
Dome Tweeter by screwdriver.
24.
取下
Speaker Plate*2
Release 2 Speaker Plates.
25.
取出
Soft Dome Tweeter*2
Release 2 Soft Dome Tweeters.
26.
用螺丝刀拆掉
Mid Woofer
螺丝
*8
Loosen the each 4 screws (BB_3*14.2mm) of 2
Mid Woofer by screwdriver.
27.
取出
Mid Woofer*2
Release 2 Mid Woofers.
28.
拆下
BT Antenna
Remove BT Antenna.
29.
用螺丝刀拆掉
Front Radiator Assy
螺丝
*4
Loosen the 4 screws (BB_3*14.2mm) of Front
Radiator Assy by screwdriver.
30.
取出
Front Radiator Assy
Remove Front Radiator Assy
31.
整理
Sponge Main Sealing
到凹槽内
Put the Sponge Main Sealing into the
gap as shown in the figure.
gap as shown in the figure.
32.
用螺丝刀拆掉
IO Cover Assy
螺丝
*3
Loosen the 3 screws (BB_3*10.2mm) of
IO Cover Assy by screwdriver.
IO Cover Assy by screwdriver.
33.
取下
IO Cover Assy
Remove IO Cover Assy.
34.
取出
DC Jack PCB
Remove DC Jack PCB.
1
2
3
Click on the first or last page to see other ONYX STUDIO 3 service manuals if exist.