Harman Kardon ONYX STUDIO 2 Service Manual ▷ View online
Onyx Studio 2
2. DISASSEMBLY INSTRUCTION
1.
把设备正面平放在工作台上
Put the device on the table as shown in
the figure.
the figure.
2.
用手取出
rubber support Left&Right.
Remove the rubber support Left and
support Right.
support Right.
3.
用螺丝刀取出右脚螺丝
Loosen the right screw_BB_3*18.2 by
screwdriver.
screwdriver.
4.
用螺丝刀取出左脚螺丝
Loosen the left screw_BB_3*18.2 by
screwdriver.
screwdriver.
Onyx Studio 2
Confidential
.
Copyright © 2015 FIH
.
All rights reserved
5.
取下
右
支架
Remove the right foot support.
6.
取下左支架
Remove the left foot support.
7.
用手或者工具从缺口位置掰开
Insert the tool into the gap as shown in the
figure and open it.
8.
取下前
網紗
盖
Remove the front cover.
9.
用螺丝刀取出前盖螺丝
*5
Loosen the 5 screws (BB_3*14.2mm) by
screwdriver.
screwdriver.
10.
从后面掰开后盖组件
Open the housing from the back cover.
1
2
3
4
5
Onyx Studio 2
Confidential
.
Copyright © 2015 FIH
.
All rights reserved
11.
打开上下壳
Open the housing.
12.
拔下
battery Connector
Release the battery connector.
13.
拔下
DC-Connector
Release the DC-Connector.
14.
拔下
USB Connector
Release the USB connector.
15.
拔下
AUX Connector
Release the AUX connector.
16.
拔下
key PCB Connector
Release the key PCB connector.
Onyx Studio 2
Confidential
.
Copyright © 2015 FIH
.
All rights reserved
17.
拔下
Speaker Connector
Release the speaker connector.
18.
用螺丝刀取下主板螺丝
*4
Loosen the 4 screws (BB_3*8.2mm) by
screwdriver.
19.
取出主板
Remove PCBA.
20.
拨出
Antenna Connector
Release the Antenna Connector.
21.
取下
Rubber Ring
Release the rubber ring.
22.
取下
Key PCB
Release the key PCB.
1
2
3
4
Click on the first or last page to see other ONYX STUDIO 2 service manuals if exist.