Harman Kardon HS 1000 (serv.man3) EMC - CB Certificate ▷ View online
Report No. SH09021130-001
Page 24 of 71
5.4 Test Protocol
Temperature
:
22
°C
Relative Humidity
:
43 %
5.5 Measurement Uncertainty
The measurement uncertainty describes the overall uncertainty of the given measured value
during the operation of the EUT.
Measurement uncertainty is calculated in accordance with CISPR 16-4-2:2003
Measurement uncertainty of mains terminal disturbance power :
during the operation of the EUT.
Measurement uncertainty is calculated in accordance with CISPR 16-4-2:2003
Measurement uncertainty of mains terminal disturbance power :
±4.5dB
The measurement uncertainty is given with a confidence of 95%, k=2
5.6 Additions, Deviations and Exclusions from Standards
None
Report No. SH09021130-001
Page 25 of 71
6. Harmonics
Test result:
PASS
6.1 Block Diagram of Test Setup
6.2 Test Setup and Test Procedure
Harmonics of the fundamental current were measured up to 40 order harmonics using a digital
power
meter with an analogue output and frequency analyser which was integrated in the harmonic &
flicker
test system. The measurements were carried out under steady conditions .
The appliance has rated input power less than 75W, and is not luminaire, and according to the
standards, no limit apply.
standards, no limit apply.
Harmonic & flicker
test system
test system
EUT
Report No. SH09021130-001
Page 26 of 71
6.3 Test Protocol
Temperature
: 25
°C
Relative Humidity
:
50 %
Current & voltage waveforms
-0.6
-0.4
-0.2
0.0
0.2
0.4
0.6
-300
-200
-100
0
100
200
300
Current (Amps)
Voltage (Volts)
Harmonics and Class A limit line European
Limits
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Current RMS(Amps)
Harmonic #
4
8
12
16
20
24
28
32
36
40
Test result: Pass Worst harmonic was #17 with 3.33% of the limit.
Report No. SH09021130-001
Page 27 of 71
Current Test Result Summary (Run time)
Test Result: Pass
Source qualification: Normal
THC(A): 0.05 I-THD(pk%): 24.77 POHC(A): 0.005 POHC Limit(A): 0.251
Highest parameter values during test:
Highest parameter values during test:
V_RMS (Volts): 229.71
Frequency(Hz): 50.00
I_Peak (Amps): 0.358
I_RMS (Amps): 0.201
I_Fund (Amps): 0.195
Crest Factor:
1.786
Power (Watts): 36.7
Power Factor:
0.795
Harm# Harms(avg) 100%Limit %of
Limit Harms(max) 150%Limit %of
Limit Status
2 0.001 1.080 0.1
0.001 1.620 0.07
Pass
3 0.038 2.300 1.6
0.042 3.450 1.23
Pass
4 0.001 0.430 0.1
0.001 0.645 0.11
Pass
5 0.013 1.140 1.2
0.015 1.710 0.87
Pass
6 0.001 0.300 0.2
0.001 0.450 0.14
Pass
7 0.008 0.770 1.1
0.009 1.155 0.80
Pass
8 0.000 0.230 0.1
0.000 0.345 0.08
Pass
9 0.006 0.400 1.4
0.006 0.600 1.05
Pass
10 0.000 0.184 0.1
0.000 0.276 0.08
Pass
11 0.006 0.330 1.9
0.007 0.495 1.37
Pass
12 0.000 0.153 0.1
0.000 0.230 0.10
Pass
13 0.004 0.210 2.1
0.005 0.315 1.60
Pass
14 0.000 0.131 0.1
0.000 0.197 0.08
Pass
15 0.004 0.150 2.4
0.004 0.225 1.83
Pass
16 0.000 0.115 0.2
0.000 0.173 0.16
Pass
17 0.006 0.132 4.4
0.007 0.199 3.33
Pass
18 0.000 0.102 0.1
0.000 0.153 0.12
Pass
19 0.003 0.118 2.6
0.004 0.178 2.03
Pass
20 0.000 0.092 0.1
0.000 0.138 0.14
Pass
21 0.003 0.107 2.5
0.003 0.161 2.08
Pass
22 0.000 0.084 0.1
0.000 0.125 0.11
Pass
23 0.002 0.098 2.6
0.003 0.147 2.17
Pass
24 0.000 0.077 0.2
0.000 0.115 0.17
Pass
25 0.002 0.090 2.8
0.003 0.135 2.10
Pass
26 0.000 0.071 0.2
0.000 0.106 0.20
Pass
27 0.002 0.083 2.2
0.002 0.125 1.98
Pass
28 0.000 0.066 0.2
0.000 0.099 0.19
Pass
29 0.001 0.078 1.8
0.002 0.116 1.66
Pass
30 0.000 0.061 0.2
0.000 0.092 0.18
Pass
31 0.001 0.073 1.1
0.001 0.109 0.99
Pass
32 0.000 0.058 0.3
0.000 0.086 0.25
Pass
33 0.001 0.068 1.6
0.001 0.102 1.37
Pass
34 0.000 0.054 0.2
0.000 0.081 0.26
Pass
35 0.001 0.064 1.0
0.001 0.096 0.83
Pass
36 0.000 0.051 0.3
0.000 0.077 0.22
Pass
37 0.001 0.061 0.9
0.001 0.091 0.76
Pass
38 0.000 0.048 0.2
0.000 0.073 0.23
Pass
39 0.001 0.058 1.5
0.001 0.087 1.23
Pass
40 0.000 0.046 0.6
0.000 0.069 0.49
Pass
6.4 Measurement Uncertainty
The measurement uncertainty for harmonic test is under consideration according to
CISPR 16-4-2:2003
CISPR 16-4-2:2003
6.5 Additions, Deviations and Exclusions from Standards
None
Click on the first or last page to see other HS 1000 (serv.man3) service manuals if exist.