Harman Kardon HKTS 7 (serv.man12) User Manual / Operation Manual ▷ View online
TROUBLESHOOTING 13
Troubleshooting
If there is no sound from
• Check that receiver/amplifier is on and a source is playing.
any of the speakers:
• Check that the powered subwoofer is plugged in, its Power switch
is switched on to
the “ON•” position.
• Check all wires and connections between receiver/ amplifier and speakers. Make sure all wires
are connected. Make sure none of the speaker wires are frayed, cut or punctured.
• Review proper operation of your receiver/amplifier.
If there is no sound coming
• Check the “Balance” control on your receiver/amplifier.
from one speaker:
• Check all wires and connections between receiver/ amplifier and speakers. Make sure all wires are
connected. Make sure none of the speaker wires are frayed, cut or punctured.
• In Dolby Digital or DTS
®
modes, make sure that the receiver/processor is configured so that the
speaker in question is enabled.
If there is no sound from the
• Check all wires and connections between receiver/amplifier and speaker.
center speaker:
Make sure all wires are connected. Make sure none of the speaker wires are frayed,
cut or punctured.
cut or punctured.
• If your receiver/processor is set in Dolby Pro Logic mode, make sure the center speaker is not
in phantom mode.
• If your receiver/processor is set in Dolby Digital or DTS
®
mode, make sure the receiver/processor
is con-figured so that the center speaker is enabled.
If the system plays at low volumes
• Check all wires and connections between receiver/ amplifier and speakers.
but shuts off as volume is
Make sure all wires are connected.
increased:
Make sure none of the speaker wires are frayed, cut or punctured.
• If more than one pair of main speakers is being used, check the minimum impedance
requirements of your receiver/amplifier.
If there is low (or no) bass
• Make sure the connections to the left and right “Speaker Inputs” have the correct polarity (+ and –).
output:
• Make sure the subwoofer is plugged into an active electrical outlet.
• Make sure the powered subwoofer is plugged in and switched on.
• In Dolby Digital or DTS
• Make sure the powered subwoofer is plugged in and switched on.
• In Dolby Digital or DTS
®
modes, make sure your receiver/processor is
configured so that the subwoofer and LFE output are enabled.
If there is no sound from the
• Check all wires and connections between receiver/ amplifier and speakers.
surround speakers:
Make sure all wires are connected. Make sure none of the speaker wires are frayed,
cut or punctured.
• Review proper operation of your receiver/amplifier and its surround-sound features.
• Make sure the movie or TV show you are watching is recorded in a surround-sound mode.
• Make sure the movie or TV show you are watching is recorded in a surround-sound mode.
If it is not, check to see if your receiver/ amplifier has other surround modes you may use.
• In Dolby Digital or DTS
®
modes, make sure your receiver/processor is configured so that the
surround speakers are enabled.
• Review the operation of your DVD player and the jacket of your DVD to make sure that the
DVD features the desired Dolby Digital or DTS
®
mode, and that you have properly selected that
mode using both the DVD player’s menu and the DVD disc’s menu.
14 SPECIFICATIONS
Specifications
HKTS 7
System
System
Frequency Response
35Hz – 20kHz (–6dB)
35Hz – 20kHz (–6dB)
SAT-TS7
Satellites
Satellites
Recommended Power
10 – 80 Watts
10 – 80 Watts
Impedance
8 Ohms nominal
8 Ohms nominal
Sensitivity
86dB @ 1 Watt/1 meter
86dB @ 1 Watt/1 meter
Tweeter
One 1/2" dome, video-shielded
One 1/2" dome, video-shielded
Midrange
One 3" driver, video-shielded
One 3" driver, video-shielded
Dimensions (H x W x D)
167mm x 100mm x 92mm
167mm x 100mm x 92mm
Weight
0.6kg
0.6kg
CEN-TS7
Center
Center
Recommended Power
10 – 80 Watts
10 – 80 Watts
Impedance
8 Ohms nominal
8 Ohms nominal
Sensitivity
86dB @ 1 Watt/1 meter
86dB @ 1 Watt/1 meter
Tweeter
One 3/4" dome, video-shielded
One 3/4" dome, video-shielded
Midrange
Dual 3" drivers, video-shielded
Dual 3" drivers, video-shielded
Dimensions (H x W x D)
102mm x 241mm x 92mm
102mm x 241mm x 92mm
Weight
1kg
1kg
SUB-TS7
Subwoofer
Subwoofer
Amplifier
100 Watts RMS
100 Watts RMS
Bass
10" Woofer, bass-reflex enclosure
10" Woofer, bass-reflex enclosure
Dimensions (H x W x D)
479mm x 340mm x 340mm
479mm x 340mm x 340mm
Weight
15kg
15kg
All features and specifications are subject to change without notice.
Harman Kardon and Power for the Digital Revolution are registered trademarks
of Harman International Industries, Incorporated.
of Harman International Industries, Incorporated.
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
15
250 Crossways Park Drive, Woodbury, New York 11797
www.harmankardon.com
Harman Consumer International:
2, Route de Tours, 72500 Château-du-Loir, France
© 2003 Harman Kardon, Incorporated
Part 406-000-01009
www.harmankardon.com
Harman Consumer International:
2, Route de Tours, 72500 Château-du-Loir, France
© 2003 Harman Kardon, Incorporated
Part 406-000-01009