Harman Kardon HK 3770 (serv.man8) Service Manual ▷ View online
Harman Kardon
HK 3770 Service Manual
Page 13 of 120
AMPLIFIER SECTION BIAS ADJUSTMENT
Measurement condition
.No input signal or volume position is minium.
.Do not adjust at FM/AM.
.No input signal or volume position is minium.
.Do not adjust at FM/AM.
Standard value
.Ideal current = 48mA (±7%)
.Ideal DC Voltage = 22.5mA (±7%)
.Ideal current = 48mA (±7%)
.Ideal DC Voltage = 22.5mA (±7%)
( AMP PCB )
CN51
CN41
DC VOLTMETER : Connect to
CN51 ( L-CH), CN41 ( R-CH)
CN51 ( L-CH), CN41 ( R-CH)
No.
Channel
Adjust for
Adjust
1
Left
22.5mV(±7%)
CN51
2
Right
22.5mV(±7%)
CN41
VR203
VR204
Harman Kardon
HK 3770 Service Manual
Page 14 of 120
[ HK3700/3770 Reset Procedure ]
1. Standby mode.
2. Press the Tun mode key for a few seconds.
2. Press the Tun mode key for a few seconds.
3. VFD will show as below.
4. Complete reset.
Harman Kardon
HK 3770 Service Manual
Page 15 of 120
[HK3700 Firmware Upgrade Instructions]
1.
Copy the latest firmware files(*.fw and *.ve) to a USB stick's root directory.
2.
Plug a USB stick into the front panel.
3.
Power ON by using the remote control or the set button.
4.
After 30 seconds, press 'STEREO' key and 1,7,1,8 + 'ok' buttons on R/C.
Followings will be shown on the VFD.
VFD 1st line : SYSTEM UPGRADE
VFD 2nd line : Searching..
VFD 2nd line : Searching..
5.
After USB searching, Venice upgrade begins.
Followings will be shown on the VFD.
Followings will be shown on the VFD.
VFD 1st line : VENICE UPDATE
VFD 2nd line : [Updating %]
It takes about 6~8 minutes to upgrade the firmware.
VFD 2nd line : [Updating %]
It takes about 6~8 minutes to upgrade the firmware.
Harman Kardon
HK 3770 Service Manual
Page 16 of 120
Click on the first or last page to see other HK 3770 (serv.man8) service manuals if exist.