Harman Kardon HK 3380 (serv.man10) EMC - CB Certificate ▷ View online
-
IEC 60065, 6th edition : 1998
-
- Page 2 of 37 -
Order
No.
14649
Additional test according to:
Common Modifications, Special National Conditions and
National Deviations
National Deviations
CENELEC EN 60065:1998. Common Modifications,
Special National Conditions and National Deviations.
(See Appendix CENELEC EN 60065:1998)
Special National Conditions and National Deviations.
(See Appendix CENELEC EN 60065:1998)
Other requirements
General remarks:
"(see remark #)" refers to a remark appended to the report.
"(see appended table)" refers to a table appended to the report.
The test results presented in this report relate only to the object tested.
This report shall not be reproduced except in full without the written approval of the testing laboratory.
Possible test case verdicts:
P = Pass, F = Fail, N = Not applicable. Placed in the column to the right (Verdict)
"(see remark #)" refers to a remark appended to the report.
"(see appended table)" refers to a table appended to the report.
The test results presented in this report relate only to the object tested.
This report shall not be reproduced except in full without the written approval of the testing laboratory.
Possible test case verdicts:
P = Pass, F = Fail, N = Not applicable. Placed in the column to the right (Verdict)
ADDITIONAL INFORMATION
DESCRIPTION OF EQUIPMENT UNDER TEST:
A/V Receiver, Stereo amplifier circuit, Tuner circuit, RCA terminals, Antenna terminals, Mini jacks
and speaker terminals provided (see also photos).
and speaker terminals provided (see also photos).
Standby/On mode controlled by remote controller, manual operating and programming.
It has (sleep) timer function, and considered to automatic switching apparatus.
It has (sleep) timer function, and considered to automatic switching apparatus.
NAME AND ADDRESS OF OTHER PRODUCTION-SITES (FACTORIES):
DongGuan LiaoBu Anam Electronics.
Xin Cheng Management Area, LiaoBu Town, DongGuan City, GuangDong Province, China.
Xin Cheng Management Area, LiaoBu Town, DongGuan City, GuangDong Province, China.
INFORMATION ABOUT OTHER STANDARDS / DOCUMENTS CONSIDERED:
No other standards
TESTED ACCORDING TO NATIONAL REQUIREMENTS FOR THE FOLLOWING COUNTRIES:
CENELEC Countries and Singapore.
LIST OF APPENDIXES / ENCLOSURES TO THE TEST REPORT:
CENELEC EN 60065:1998
National Deviations for Singapore
Photos
-
IEC 60065, 6th edition : 1998
-
- Page 3 of 37 -
Order
No.
14649
SUMMARY OF TESTING:
The apparatus complies with the requirements in IEC 60065:1998 and EN 60065:1998
Clause Information/Remarks
Comments
-
IEC 60065, 6th edition : 1998
-
- Page 4 of 37 -
Order
No.
14649
TEST REPORT INFORMATION
It should be taken into account that this test report does not replace the text in the test specification.
Only general tests have been mentioned in the pre-printed text. For complete tests and requirements we refer to the
actual specification mentioned.
Only general tests have been mentioned in the pre-printed text. For complete tests and requirements we refer to the
actual specification mentioned.
IEC 60065, 6th edition:1998
The meaning of certain marks and abbreviations (Voltages and currents are r.m.s. values unless otherwise specified)
OK = no remarks
pr
= primary
? = unclear, borderline case
sec
= secondary
∆
t = temperature rise
pr-sec
= primary-secondary
tpr = thermal paper
pr-ss
= primary-static screen
h, m, s = hour, minute, second
pr-ic
= primary-iron core
U, I, P = voltage, current, power
pr-tra
= primary-transformer encl.
û,î = peak value
F
= fuse
n
= rated
PWB
= printed wiring board
= issue considered
LSL
= loudspeaker load
-
IEC 60065, 6th edition : 1998
-
- Page 5 of 37 -
Order
No.
14649
Standardized approval marks
1
SCOPE
According to the standard
2
DEFINITIONS
According to the standard
3
GENERAL REQUIREMENTS
According to the standard
Safety class of the apparatus
Class II
4
GENERAL CONDITIONS FOR
TESTS
TESTS
According to the standard
4.1.4 -
4.2.12.
4.2.12.
Normal operating
conditions/position/adjustments
conditions/position/adjustments
With all users controls set to obtain maximum power from
the mains and at 1/8 of max. audio output power.
Positioned in a test box according to users instruction.
the mains and at 1/8 of max. audio output power.
Positioned in a test box according to users instruction.
5
MARKING AND INSTRUCTIONS
P
Copy of the markings :
SEE ATTACHED PHOTOS
Comprehensible and easily
discernible
discernible
On front and rear side of the enclosure
P
Permanent durability against water
and petroleum spirit
and petroleum spirit
Tested with water / spirit
P
5.1
Identification, maker, model
P
Class II symbol
P
Rated supply voltage and symbol
AC-symbol (
~
) and 230V marked
P
Rated mains frequency
50Hz
P
Rated current or power consumption
200 W
P
5.2
Earth terminal
Class II apparatus
N
Hazardous live terminals
No live parts accessible
P
Supply output terminals (other than
mains)
mains)
The power is marked close to the socket outlet
P
5.3
Use of triangle with exclamation
mark
(Symbol ISO 7000-0434)
Correct symbol applied: Imprinted on rear side in
connection with CAUTION of opening. Further; no
incorrect use of this symbol is found.
connection with CAUTION of opening. Further; no
incorrect use of this symbol is found.
P
5.4
Instructions for use
P
5.4.1
Mains powered equipment not
exposed to dripping or splashing
exposed to dripping or splashing
Adequate instructions supplied.
P
Hazardous live terminals,
instructions for wiring
instructions for wiring
No live terminal.
N
Instructions for replacing lithium
battery
battery
No lithium battery
N
Click on the first or last page to see other HK 3380 (serv.man10) service manuals if exist.