Harman Kardon HK 3270 (serv.man4) User Manual / Operation Manual ▷ View online
¡
™
£
¢
∞
§
¶
™
£
¢
∞
§
¶
•
ª
‚
⁄
¤
‹
›
ª
‚
⁄
¤
‹
›
fi
fl
‡
°
·
fl
‡
°
·
Rear Panel Connections
7
ENGLISH
¡
AM Antenna:
Connect the AM
loop antenna supplied with the
receiver to these terminals. If an
external AM antenna is used, make
connections to the
receiver to these terminals. If an
external AM antenna is used, make
connections to the
AM
and
GND
terminals in accordance with the
instructions supplied with the
antenna.
instructions supplied with the
antenna.
™
FM Antenna:
Connect an indoor
or external FM antenna to this
terminal.
terminal.
£
Phono Ground:
Connect the
ground wire from a turntable to this
terminal to reduce system hum.
terminal to reduce system hum.
¢
Remote IR In:
If the HK3270
RDS’s front panel IR sensor is
blocked due to cabinet doors or
other obstructions, an external IR
sensor may be used. Connect the
output of the sensor to this jack.
blocked due to cabinet doors or
other obstructions, an external IR
sensor may be used. Connect the
output of the sensor to this jack.
∞
Remote IR Out:
This connection
permits the IR sensor in the receiver
to serve other remote controlled
devices. Connect this jack to the
“IR IN” jack on Harman Kardon or
other compatible equipment.
to serve other remote controlled
devices. Connect this jack to the
“IR IN” jack on Harman Kardon or
other compatible equipment.
§
Phono Inputs:
Connect the
outputs of your turntable or tone arm
to these jacks. Note that only Moving
Magnet (MM) type cartridges may be
used.
to these jacks. Note that only Moving
Magnet (MM) type cartridges may be
used.
¶
CD Inputs:
Connect these jacks
to the output of a compact disc
player or CD changer.
player or CD changer.
•
Aux Inputs:
Connect these jacks
to the line-level audio output of any
device such as a TV, cable converter
or portable audio player.
device such as a TV, cable converter
or portable audio player.
AC 230V 50HZ
500W
IN
FM
75
75
Ω
AM
LOOP
LOOP
IN
IN
IN
PLAY
REC. OUT
PLAY
REC. OUT
MONO
RIGHT
LEFT
SUB OUT
PRE OUT
MAIN IN
TAPE MON.
TAPE 2
AUX
CD
PHONO
OUT
L
R
GND
S P E A K E R 1 ( 8 O h m s )
S P E A K E R 2 ( 8 O h m s )
°
£
¢
∞
¢
∞
¡
™
‹ › fi
‚ ⁄
ª
•
§ ¶
fl
‡
·
AM Antenna
FM Antenna
Phono Ground
Remote IR In
Remote IR Out
Phono Inputs
CD Inputs
FM Antenna
Phono Ground
Remote IR In
Remote IR Out
Phono Inputs
CD Inputs
Aux Inputs
Tape Monitor Play/In
Tape Monitor Record/Out
Tape 2 Play/In
Tape 2 Record/Out
Main In
Preamp Out
Tape Monitor Play/In
Tape Monitor Record/Out
Tape 2 Play/In
Tape 2 Record/Out
Main In
Preamp Out
Subwoofer Out
Speaker 1 Terminals
Speaker 2 Terminals
Switched AC Outlet
Power Cable
Speaker 1 Terminals
Speaker 2 Terminals
Switched AC Outlet
Power Cable
Rear Panel Connections
8
ENGLISH
ª
Tape Monitor Play/In:
Connect
these jacks to the Play/Out jacks of
an audio recorder.
an audio recorder.
‚
Tape Monitor Record/Out:
Connect these jacks to the Rec/In
jacks of an audio recorder.
jacks of an audio recorder.
NOTE:
When these jacks are
connected to a three-head recorder
or another device with off-head
playback, it will be possible to
monitor the source being recorded.
or another device with off-head
playback, it will be possible to
monitor the source being recorded.
⁄
Tape 2 Play/In:
Connect these
jacks to the PLAY/OUT jacks of a
second audio recorder.
second audio recorder.
¤
Tape 2 Record/Out:
Connect
these jacks to the Rec/In jacks of a
second audio recorder.
second audio recorder.
‹
Main In:
These jacks are the input
to the HK3270 RDS’s power amplifier.
Unless an external power amplifier is
used, the jumper pins should remain
connected to the
Unless an external power amplifier is
used, the jumper pins should remain
connected to the
Preamp Out
jacks
›.
›
Preamp Out:
These jacks
provide an output for the left and
right channels to an optional
external amplifier. In normal
operation, unless an external power
amplifier is used, the jumper pins
should remain connected to the
right channels to an optional
external amplifier. In normal
operation, unless an external power
amplifier is used, the jumper pins
should remain connected to the
Main In
jacks ‹.
fi
Subwoofer Out:
Connect these
jacks to the line level input of a
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
powered subwoofer. If an external
subwoofer amplifier is used, connect
this jack to the subwoofer amplifier
input.
fl
Speaker 1 Terminals:
Connect
these terminals to the appropriate
terminals on your speakers.
terminals on your speakers.
‡
Speaker 2 Terminals:
Connect
these terminals to the appropriate
terminals on your speakers.
terminals on your speakers.
°
Switched AC Outlet:
This outlet
may be used to power any device
that you wish to have turn on when
the unit is turned on with the
that you wish to have turn on when
the unit is turned on with the
System
Power Control
switch 2.
NOTE:
The power consumption of
the device plugged into this outlet
should not exceed 100 watts.
should not exceed 100 watts.
·
Power Cable:
Connect the AC
plug to a non-switched AC wall
output.
output.
å
∫
ç
∂
≠
ƒ
©
˙
î
∆
˚
¬
µ
ñ
ø
π
Q
R
S
T
U
V
∫
ç
∂
≠
ƒ
©
˙
î
∆
˚
¬
µ
ñ
ø
π
Q
R
S
T
U
V
Remote Control Functions
9
ENGLISH
Main Power On
Main Power Off
Source Selectors
Preset Up/Down
Transport Controls
Disc Skip
RDS Display Button
RDS PTY Button
Sleep Button
Dimmer
Main Tuning Up/Down
Master Volume
P•Scan
Mute
FM Mode
Tuning Up/Down
Direct
Numeric Keys
Auto Preset
Secondary Control Cover
Clear Button
Memory
Main Power Off
Source Selectors
Preset Up/Down
Transport Controls
Disc Skip
RDS Display Button
RDS PTY Button
Sleep Button
Dimmer
Main Tuning Up/Down
Master Volume
P•Scan
Mute
FM Mode
Tuning Up/Down
Direct
Numeric Keys
Auto Preset
Secondary Control Cover
Clear Button
Memory
ON
OFF
MASTER VOL.
1
2
3
4
7
9
8
0
5
6
TAPE 2
TUNING
DWN - TUNING - UP
MAIN POWER
P. SCAN
MUTE
SLEEP
DIMMER
DIRECT
MEMORY
PRESET
AUTO
CLEAR
HK 3270 RDS RC
PHONO
TAPE 1
AUX
AM
FM
CD
DWN - PRESET - UP
/
DISC SKIP
FM MODE
DISP -RDS- PTY
U
V
å
R
S
T
∆
∫
ç
∂
≠
ƒ
¬
µ
ø
µ
π
Q
˙
©
Remote Control Functions
10
ENGLISH
å
Main Power On:
When the
HK3270 RDS is in the Standby mode,
as indicated by the
as indicated by the
Power Indicator
3 glowing amber, press this button to
turn the HK3270 RDS on.
turn the HK3270 RDS on.
∫
Main Power Off:
When the
HK3270 RDS is turned on, press this
button to place it in the Standby
mode. Note that in this condition, the
unit is still connected to AC Power.
button to place it in the Standby
mode. Note that in this condition, the
unit is still connected to AC Power.
ç
Source Selectors:
Press these
buttons to select an input source for the
HK3270 RDS.
HK3270 RDS.
∂
Preset Up/Down:
When the tuner
is in use, these buttons scroll through
the stations that have been
programmed into the HK3270 RDS’s
memory. These buttons also control
the track Skip Up and Down on
compatible Harman Kardon compact
disc players/ changers and cassette
tape decks (with that function), if the
corresponding source is selected.
the stations that have been
programmed into the HK3270 RDS’s
memory. These buttons also control
the track Skip Up and Down on
compatible Harman Kardon compact
disc players/ changers and cassette
tape decks (with that function), if the
corresponding source is selected.
≠
Transport Controls:
These
buttons are used to control Play, Play
Forward, Play Reverse, Stop, Pause
and Record functions on compatible
Harman Kardon compact disc players/
changers and cassette tape decks
depending on the input source
selected.
Forward, Play Reverse, Stop, Pause
and Record functions on compatible
Harman Kardon compact disc players/
changers and cassette tape decks
depending on the input source
selected.
ƒ
Disc Skip:
These buttons do not
have any functions when controlling
the HK3270 RDS, but they operate
the Disc Skip functions of compatible
Harman Kardon compact disc
changers.
the HK3270 RDS, but they operate
the Disc Skip functions of compatible
Harman Kardon compact disc
changers.
©
RDS Display Button:
Press this
button to view the various displays of
the RDS options that are available
when a station is transmitting RDS
data. (See pages 16 –17 for more
information on RDS tuning.)
the RDS options that are available
when a station is transmitting RDS
data. (See pages 16 –17 for more
information on RDS tuning.)
˙
RDS PTY Button:
Press this
button to start a search for a specific
PTY type using the RDS capabilities of
the HK3270 RDS. (See pages 16 –17
for more information on RDS tuning.)
PTY type using the RDS capabilities of
the HK3270 RDS. (See pages 16 –17
for more information on RDS tuning.)
î
Sleep Button:
Press this button to
place the unit in the Sleep mode.
After the time shown in the display,
the HK3270 RDS will automatically
go into the Standby mode. Each
press of the button changes the time
until turn-off in the following order:
After the time shown in the display,
the HK3270 RDS will automatically
go into the Standby mode. Each
press of the button changes the time
until turn-off in the following order:
∆
Dimmer:
Press this button once to
reduce the brightness of the front
panel display to half the normal
intensity. Press it again to turn the front
panel display completely off. When
the display is completely off, press the
button to return to normal brightness.
panel display to half the normal
intensity. Press it again to turn the front
panel display completely off. When
the display is completely off, press the
button to return to normal brightness.
˚
Main Tuning Up/Down:
When the
tuner is in use, these buttons will tune
up or down through the selected
frequency band. A brief press of the
button will manually tune to the next
frequency increment, while pressing
and holding the button for a longer
period (>0.5 sec) will fastly step
through the FM band. As soon as the
button is released the unit will
automatically tune to the next station
with a signal strong enough for
acceptable reception. .
up or down through the selected
frequency band. A brief press of the
button will manually tune to the next
frequency increment, while pressing
and holding the button for a longer
period (>0.5 sec) will fastly step
through the FM band. As soon as the
button is released the unit will
automatically tune to the next station
with a signal strong enough for
acceptable reception. .
¬
Master Volume:
Press these
buttons to raise or lower the HK3270
RDS’s volume.
RDS’s volume.
µ
P•Scan:
Press this button to
automatically scan through the list of
stations that are programmed into the
HK3270 RDS’s tuner memory. When
the button is pressed, each preset
station will play for five seconds
before the next station is selected.
Press the button again when the
desired station is heard to stop the
preset scan.
stations that are programmed into the
HK3270 RDS’s tuner memory. When
the button is pressed, each preset
station will play for five seconds
before the next station is selected.
Press the button again when the
desired station is heard to stop the
preset scan.
Ñ
Mute:
Press this button to
momentarily silence the HK3270 RDS.
ø
FM Mode:
Press this button when
the tuner is in use in the FM band to
switch to monaural reception if the
stereo station is weak and noisy.
When the MONO indicator is on, FM
reception will be monaural regardless
of the strength of the tuned FM station.
(See page 15 for more information.)
switch to monaural reception if the
stereo station is weak and noisy.
When the MONO indicator is on, FM
reception will be monaural regardless
of the strength of the tuned FM station.
(See page 15 for more information.)
π
Tuning Up/Down:
These buttons
work in the same way as the
Main
Tuning Up/Down
˚ buttons
discribed above, if tuner is in use. But
if CD or Tape is in use, these buttons
will also control Fast Forward and Fast
Reverse (or Rewind) for compatible
Harman Kardon compact disc
players/ changers and cassette tape
decks.
if CD or Tape is in use, these buttons
will also control Fast Forward and Fast
Reverse (or Rewind) for compatible
Harman Kardon compact disc
players/ changers and cassette tape
decks.
90
min
80
min
70
min
60
min
50
min
40
min
30
min
20
min
10
min
OFF
Q
Direct :
Press this button to select
a radio station by entering its
frequency using the
frequency using the
Numeric Keys
R. (See page 15 for more
information.)
information.)
R
Numeric Keys:
These buttons
serve as a ten-button numeric
keypad to enter tuner preset
positions or frequencies or track
numbers with compatible CD
players/changers.
keypad to enter tuner preset
positions or frequencies or track
numbers with compatible CD
players/changers.
S
Auto Preset:
When the tuner and
FM band have been selected, this
button may be used to automatically
program the tuner presets for all
stations with acceptable signal
strength. To start the auto preset
scan, press and hold the button.
Note that the MEMO and PRESET
indicators will flash. After a few
seconds, the tuner will start to “look”
for active stations, as shown by
increasing frequency numbers in the
Information Display. Release the
button and note that the tuner will
briefly stop at each acceptable
station and add a preset number to
the memory. If the FM tuner found
less than 30 FM stations with
acceptable signal strength, the Auto
Preset tuning will scan two more
cycles or until the remaining vacant
preset memory spaces have been
filled with those found in the first
scan. The scan will stop when all 30
preset memory spaces have been
filled or when three scans through the
band have been completed.
button may be used to automatically
program the tuner presets for all
stations with acceptable signal
strength. To start the auto preset
scan, press and hold the button.
Note that the MEMO and PRESET
indicators will flash. After a few
seconds, the tuner will start to “look”
for active stations, as shown by
increasing frequency numbers in the
Information Display. Release the
button and note that the tuner will
briefly stop at each acceptable
station and add a preset number to
the memory. If the FM tuner found
less than 30 FM stations with
acceptable signal strength, the Auto
Preset tuning will scan two more
cycles or until the remaining vacant
preset memory spaces have been
filled with those found in the first
scan. The scan will stop when all 30
preset memory spaces have been
filled or when three scans through the
band have been completed.
T
Secondary Control Cover:
This
sliding cover normally is in the “up”
position so that it hides the
secondary controls. To access these
controls, place your thumb on the
small recessed area at the top center
of the control, and gently press the
cover down and towards you.
position so that it hides the
secondary controls. To access these
controls, place your thumb on the
small recessed area at the top center
of the control, and gently press the
cover down and towards you.
U
Clear Button:
This button is used
to clear preset memory information for
the HK3270 RDS’s tuner. (See pages
15–16 for more information on tuner
presets.)
the HK3270 RDS’s tuner. (See pages
15–16 for more information on tuner
presets.)
V
Memory:
Press this button to
open a memory position that stores a
preset location for the HK3270 RDS’s
tuner. (See pages 15–16 for more
information on tuner presets.)
preset location for the HK3270 RDS’s
tuner. (See pages 15–16 for more
information on tuner presets.)
Click on the first or last page to see other HK 3270 (serv.man4) service manuals if exist.